UD Trading Pty Ltd company logo

Mica

UD Trading supplies mica flakes (muscovite mica, CAS 12001-26-2) in fine and coarse grades to drilling fluid companies, mud engineers, drilling contractors, mineral explorers and industrial users across Australia, as a lost circulation material and as a functional filler. Supplied as silvery, flexible flakes in 25 kg bags, orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Port Hedland, Darwin and regional drilling centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Mica at a glance

Chemical NameMica
Chemical FormulaKAl2(AlSi3O10)(OH)2
Other NamesMuscovite, Phlogopite, Sheet Silicate
CAS No12001-26-2

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag (fine or coarse)25 kg (40 per pallet)Rig sites, exploration and water bore crews, workshops
Pallet of 25 kg bags, shrink-wrapped1,000 kgMud plants, drilling contractors, manufacturers
Bulk bag (FIBC, jumbo bag)1,000 kgPlants, mines, contractors, scheduled supply
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Mica specification

Our mica is a dry-ground muscovite screened into fine and coarse flake grades and tested for mica content, moisture and sieve distribution on every batch.

ParameterSpecification
AppearanceGrey / off-white flake powder
Mica content≥ 90 %
Moisture≤ 1.0 %
Aspect ratioAs per grade
Particle size (mesh)As per grade
Free silica (quartz)Reported on COA

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: muscovite is a potassium aluminium silicate, KAl₂(AlSi₃O₁₀)(OH)₂; specific gravity 2.7–2.9; bulk density of flakes about 250–450 kg/m³; Mohs hardness 2–2.5; thin, elastic plates with a high aspect ratio (width 20–100 times thickness); chemically inert in water-based, brine and oil-based fluids and to acids and alkalis at drilling temperatures; thermally stable to above 500 °C; an electrical insulator.

Fine or coarse mica: which grade to specify

GradeTypical flake sizeBest suited to
FineMostly under 1 mmSeepage losses, continuous low-dose treatment, passes shaker screens, filler in paints, coatings and sealants
CoarseAbout 1–3 mm and largerPartial to severe losses in fractured, vuggy and gravelly formations, LCM pills with walnut plug and fibre

Mica flakes work by lying flat across a fracture or pore opening and shingling over one another, which is why they are usually blended with a granular material such as walnut plug that bridges the opening and a fibre that holds the mat together.

How much mica do you need: worked examples

  • Continuous seepage treatment. Run 15–30 kg/m³ (5–10 lb/bbl) of fine mica in the active system. A 100 m³ system at 20 kg/m³ needs 2,000 kg, or 80 × 25 kg bags, added slowly through the hopper.
  • LCM pill for partial losses. 45–60 kg/m³ (15–20 lb/bbl) of coarse mica plus 45–60 kg/m³ of medium walnut plug. A 15 m³ pill at 50 kg/m³ of each takes 750 kg of mica (30 bags) and 750 kg of walnut plug.
  • Severe-loss pill. 60–90 kg/m³ of coarse mica with 90–115 kg/m³ of coarse walnut plug and 15–30 kg/m³ of fibre. A 10 m³ pill at 75 kg/m³ of mica needs 750 kg. Bypass the shakers or pull screens while the pill returns.
  • Converting field units. 1 lb/bbl = 2.85 kg/m³, so a programme calling for 15 lb/bbl of mica is 15 × 2.85 ≈ 43 kg/m³; a 20 m³ pill needs about 860 kg, or 35 bags.
  • Volume added by the solids. At SG 2.8, every 1,000 kg of mica adds 0.36 m³ to the pill, so mix 750 kg into 9.7 m³ of base fluid to finish with a 10 m³ pill.

What Mica is used for

  • Lost circulation control. Seals fractures, vugs and permeable sands in water-based, brine and oil-based muds for oil and gas, geothermal, mineral exploration, water bore and HDD drilling, usually blended with walnut plug, fibre and bentonite.
  • Seepage-loss and filter-cake improvement. Fine flakes lower filter-cake permeability in depleted and high-permeability sands.
  • Paints, powder coatings and sealants. A platy filler that improves barrier properties, crack resistance and weathering.
  • Plastics and rubber. Reinforcing filler that raises stiffness and dimensional stability.
  • Construction products. Joint compounds, textured coatings, roofing and cement boards.
  • Welding consumables and electrical. Flux coatings on welding rods and insulating fillers, because mica withstands heat and does not conduct.

Handling and storage

Mica is not classified as dangerous goods for transport under the ADG Code. It is a mineral dust: use a P2 dust mask when emptying bags in confined spaces and avoid breathing fine dust over long periods. Flakes are slippery on steel decks, so sweep up spills promptly. Store bags dry and off the ground. Always read the Safety Data Sheet before use.

Why buy Mica from UD Trading

When a hole is taking fluid you want flake, granule and fibre on the same truck. We hold fine and coarse mica alongside walnut plug in multiple Australian warehouses, release every batch against mica content, moisture and sieve limits under our ISO 9001:2015 quality system, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and mining chemicals, or contact our team for a quote. Chemical identity reference: CAS 12001-26-2 on CAS Common Chemistry.

Mica FAQ

What grades of mica do you supply?

Fine flake (mostly under 1 mm) and coarse flake (about 1–3 mm and larger), both at a minimum of 90% mica and 1% maximum moisture.

How is it packed?

In 25 kg bags, 40 bags to a 1,000 kg pallet, with full container loads available for scheduled supply.

How much mica goes in an LCM pill?

Typically 45–60 kg/m³ (15–20 lb/bbl) for partial losses and 60–90 kg/m³ for severe losses, blended with walnut plug and fibre. A 15 m³ pill at 50 kg/m³ needs 750 kg.

Can mica be run through shale shakers?

Fine mica passes most screens and can be kept in the system. Coarse mica is screened out, so pills are usually pumped with the shakers bypassed.

Is mica acid soluble?

No. Mica is inert to acid, so where the bridging material must be removed by acid wash use sized calcium carbonate instead.

Is mica dangerous goods?

No. Mica is not classified as dangerous goods for transport. Control dust and refer to the SDS.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Mica

Contact us for pricing, availability and documentation for Mica. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia