Xanthan Gum
UD Trading supplies xanthan gum (E415, CAS 11138-66-2), food-grade FCC powder with a 1% viscosity of 1,200–1,600 cP, to drilling fluid companies and HDD contractors, food and beverage manufacturers, cosmetics and personal-care makers, agricultural formulators and industrial users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Roma and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Xanthan Gum at a glance
| Chemical Name | Xanthan Gum |
|---|---|
| Chemical Formula | (C35H49O29)n |
| Other Names | Corn Sugar Gum, Bacterial Polysaccharide, E415 |
| CAS No | 11138-66-2 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg multi-wall bag with PE liner | 25 kg (40 per pallet) | Food manufacturers, HDD crews, cosmetics makers |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Mud plants, distributors, large food plants |
| Bulk bag (FIBC, jumbo bag) | 1,000 kg | Plants, mines, contractors, scheduled supply |
| Full container load (FCL) | 12–14 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Xanthan Gum specification
Xanthan gum is specified on identification, viscosity in 1% KCl, moisture, pH, ash, pyruvic acid and particle size. Viscosity and pyruvate content are the quality markers: pyruvate above 1.5% indicates a well-fermented gum that builds full viscosity and salt tolerance.
| Parameter | Specification |
|---|---|
| Appearance | Cream to white free-flowing powder |
| Identification | Passes test (FCC / E415) |
| Viscosity (1% in 1% KCl, 25 °C) | 1200 – 1600 cP |
| Loss on drying (105 °C) | ≤ 13.0 % |
| pH (1% solution) | 6.0 – 8.0 |
| Ash | ≤ 13.0 % |
| Pyruvic acid | ≥ 1.5 % |
| Particle size (through 80 mesh) | ≥ 92 % |
| Nitrogen | ≤ 1.5 % |
| Lead | ≤ 2.0 mg/kg |
| Total plate count | ≤ 5000 cfu/g |
| Yeast and mould | ≤ 300 cfu/g |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: a high-molecular-weight polysaccharide (about 2 × 10⁶ g/mol) from Xanthomonas campestris fermentation; dissolves in hot or cold water; strongly shear-thinning, so a 1% solution reads around 1,400 cP at low shear but pumps and pours easily; viscosity is nearly independent of temperature up to about 90 °C and of pH between 2 and 12; tolerates salt to saturation and calcium brines; synergistic with guar and locust bean gum; degrades above about 120 °C in drilling fluids unless oxygen scavengers and formate brines are used.
Xanthan, guar or PAC: which polymer to buy
| Property | Xanthan gum (this product) | Guar gum | PAC-LV / PAC-HV |
|---|---|---|---|
| Main job in a mud | Suspension and hole cleaning (low-shear viscosity, gel strength) | Cheap bulk viscosity, fast hydration | Fluid-loss control (LV) or fluid loss plus viscosity (HV) |
| Salt and calcium tolerance | Excellent | Moderate | Good |
| Temperature limit | About 120 °C | About 80 °C | About 150 °C |
| Typical dose | 1–3 kg/m³ | 2–6 kg/m³ | 2–6 kg/m³ |
| See also | guar gum | PAC-LV, PAC-HV |
How much xanthan gum do you need: worked examples
- Drilling or HDD fluid. 1–3 kg/m³ depending on hole cleaning needs; each 1 kg/m³ typically adds 3–6 units to the 6 rpm reading. A 100 m³ water-based mud at 2 kg/m³ needs 200 kg, eight bags; an HDD pit of 10,000 L at 1 kg/m³ needs 10 kg. Add slowly through a hopper into moving fluid and allow 20–30 minutes to hydrate; prehydrate bentonite first.
- Completion brine sweep. 3–5 kg/m³ in KCl or calcium chloride brine for viscous pills. A 20 m³ sweep at 4 kg/m³ uses 80 kg.
- Food and beverage. 0.1–0.5% in sauces, dressings and gluten-free bakery. A 5,000 kg batch of dressing at 0.3% uses 15 kg; disperse in oil or dry-blend with sugar before adding water to avoid lumps.
- Agricultural spray and drift control. 0.5–2 g/L as a thickener and drift retardant; a 3,000 L spray tank at 1 g/L uses 3 kg.
- Cosmetics and cleaners. 0.2–1.0% for gels, suspensions and viscous cleaners; a 1,000 L batch at 0.5% uses 5 kg.
What Xanthan Gum is used for
- Drilling fluids and HDD. Viscosifier and suspending agent for water-based muds, brines, reservoir drill-in fluids and horizontal directional drilling, alongside our drilling fluid chemicals.
- Food and beverage. Thickener, stabiliser and gluten replacement in sauces, dressings, dairy, beverages and bakery.
- Personal care and cleaning. Gels, lotions, toothpaste and thickened bleach and acid cleaners.
- Agriculture. Spray thickener, seed-coating binder and suspension aid in liquid fertilisers.
- Industrial. Textile printing, ceramics, paints and explosive slurries.
Handling and storage
Xanthan gum is not classified as dangerous goods for transport and is a food ingredient, but the fine powder is a dust and slip hazard: wet floors become extremely slippery, so clean spills dry. Use a dust mask when tipping bags. Store sealed, dry, below 30 °C and away from strong oxidisers; shelf life 24 months. Always read the Safety Data Sheet before use.
Why buy Xanthan Gum from UD Trading
A gum that misses its viscosity number means extra sacks on the rig or a thin sauce in the plant. Every batch is released against FCC and viscosity limits under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses. Browse our drilling fluid chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 11138-66-2 on CAS Common Chemistry.
Xanthan Gum FAQ
Is your xanthan gum food grade?
Yes. It passes FCC and E415 identification, with 1% viscosity of 1,200–1,600 cP in 1% KCl, reported on the batch COA. The same grade is used by drilling and industrial customers.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.
How much xanthan do I add to drilling mud?
1–3 kg/m³; 200 kg for a 100 m³ system at 2 kg/m³. Add through a hopper into moving fluid and allow 20–30 minutes to hydrate.
Is xanthan gum dangerous goods?
No. It is not classified as dangerous goods and is a permitted food additive. Keep spills dry because wet gum is very slippery.
Does it work in salt water and brines?
Yes. Xanthan keeps its viscosity in saturated salt and calcium brines, which is why it is the standard viscosifier for completion fluids.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to rig sites and regional plants?
Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Xanthan Gum
Contact us for pricing, availability and documentation for Xanthan Gum. Call 07 3040 7298 or email sales@udtrading.com.au.

