UD Trading Pty Ltd company logo

Polyanionic Cellulose PAC-LV

UD Trading supplies polyanionic cellulose PAC-LV (low-viscosity PAC, CAS 9004-32-4), an API 13A fluid-loss control polymer, to drilling fluid companies, drilling contractors, HDD and water-bore drillers and mineral explorers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Port Hedland, Dampier, Darwin and regional drilling centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system. Not to be confused with poly aluminium chloride, the water-treatment coagulant we also supply as PAC coagulant.

PAC-LV at a glance

Chemical NamePolyanionic Cellulose – Low Viscosity
Other NamesPAC-LV, PAC LV, PAC-L, low-viscosity PAC, drilling-grade polyanionic cellulose
CAS No9004-32-4

Pack sizes and how to order

PackNet weightTypical buyer
25 kg multi-wall bag with PE liner25 kg (40 per pallet)Rig sites, HDD crews, exploration camps
Pallet of 25 kg bags, shrink-wrapped1,000 kgMud plants, drilling contractors, distributors
Bulk bag (FIBC, jumbo bag)1,000 kgPlants, mines, contractors, scheduled supply
Full container load (FCL)16–20 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry, including delivered rates to drilling supply bases. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

PAC-LV specification

PAC-LV is tested to API 13A methods: apparent viscosity and filtrate volume in the standard salt-water test fluid, moisture, and absence of starch. Low viscosity with low filtrate is what distinguishes a true PAC-LV from technical CMC.

ParameterSpecification
AppearanceWhite to off-white free-flowing powder
Moisture≤ 10.0 %
Starch and starch derivativesAbsent
Apparent viscosity (600 r/min, API 13A test fluid)≤ 40 cP
Filtrate volume (API 13A test fluid)≤ 16 mL

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: sodium carboxymethyl cellulose with a degree of substitution of at least 0.9, which gives its salt tolerance and low viscosity at a given concentration; bulk density about 0.5–0.7 g/mL; dissolves in fresh water and in brines to saturation; thermally stable to about 150 °C; pH of a 1% solution 6.5–8.0; forms a thin, tough, low-permeability filter cake and encapsulates cuttings; biodegradable and non-toxic.

PAC-LV, PAC-HV, CMC or starch: which fluid-loss additive to buy

PropertyPAC-LV (this product)PAC-HVTechnical CMCModified starch
Main jobFluid-loss control with minimal viscosityFluid loss plus viscosityFluid loss in fresh waterFluid loss, cheap, biodegrades fast
API viscosity (test fluid)≤ 40 cP≥ 50 cPVariesLow
Salt and calcium toleranceHigh (DS ≥ 0.9)HighModerateHigh
Temperature limitAbout 150 °CAbout 150 °CAbout 120 °CAbout 120 °C, needs biocide
Typical dose2–6 kg/m³1–4 kg/m³3–8 kg/m³10–20 kg/m³
See alsoPAC-HVpotato starch

How much PAC-LV do you need: worked examples

  • KCl polymer mud. A typical formulation per m³ of water: 50 kg potassium chloride, 3–5 kg PAC-LV, 1–2 kg xanthan gum, 10–20 kg prehydrated bentonite, plus barite to weight. For a 100 m³ active system at 4 kg/m³ you need 400 kg of PAC-LV, 16 bags, for an API filtrate target of 6–8 mL.
  • Reducing filtrate on a running hole. Each 1 kg/m³ of PAC-LV typically cuts API filtrate by 1–3 mL in a bentonite mud. Bringing a 150 m³ system from 14 mL to 8 mL needs about 2–3 kg/m³, 300–450 kg, added over two circulations through the hopper.
  • HDD and water-bore fluids. 1–2 kg/m³ alongside bentonite to stabilise sands and gravels; a 10,000 L mixing tank at 1.5 kg/m³ takes 15 kg.
  • Reservoir drill-in fluid. 4–6 kg/m³ PAC-LV with 3–4 kg/m³ xanthan and sized calcium carbonate bridging solids in brine; a 60 m³ batch at 5 kg/m³ uses 300 kg.
  • Mixing. Add through a venturi hopper at no more than one 25 kg bag every 3–5 minutes into fast-moving fluid; allow 30 minutes to hydrate before reading filtrate.

What PAC-LV is used for

  • Water-based drilling fluids. Fluid-loss control and filter-cake quality in fresh-water, KCl, NaCl and saturated-salt muds, alongside our drilling fluid chemicals.
  • HDD and trenchless. Bore stability in permeable ground and reduced fluid loss to formation.
  • Mineral exploration and water bores. Low-solids polymer fluids where viscosity must stay low for fast penetration.
  • Reservoir drill-in and completion. Clean, acid-soluble filter cakes with calcium carbonate bridging.
  • Other industries. Thickener and water-retention aid in detergents, ceramics and construction products.

Handling and storage

PAC-LV is not classified as dangerous goods for transport and is not hazardous to handle, but the powder is a dust and slip hazard: clean spills dry and use a dust mask when tipping bags. Store sealed, dry and off the ground; moisture above the 10% limit causes caking and slower hydration. Always read the Safety Data Sheet before use.

Why buy PAC-LV from UD Trading

A PAC that reads like CMC costs you filtrate and sacks. Every batch is released against the API 13A viscosity and filtrate limits under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and mining chemicals, or contact our team for a quote. Chemical identity reference: CAS 9004-32-4 on CAS Common Chemistry.

PAC-LV FAQ

Is your PAC-LV API grade?

Yes. It is tested to API 13A: apparent viscosity ≤ 40 cP and filtrate ≤ 16 mL in the standard test fluid, moisture ≤ 10%, starch absent, reported on the batch COA.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.

How much PAC-LV per cubic metre?

2–6 kg/m³ depending on the filtrate target; 400 kg for a 100 m³ system at 4 kg/m³.

Is PAC-LV dangerous goods?

No. It is not classified as dangerous goods for transport. Keep spills dry because wet polymer is slippery.

PAC-LV or PAC-HV?

PAC-LV when you need fluid-loss control without raising viscosity; PAC-HV when you also want viscosity and hole cleaning from the same sack.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to drilling supply bases?

Yes. We deliver Australia-wide by road and rail freight, including Roma, Moomba, Port Hedland, Dampier and Darwin, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Polyanionic Cellulose PAC-LV

First, contact us for pricing, availability and documentation for Polyanionic Cellulose PAC-LV. Alternatively, call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia