UD Trading Pty Ltd company logo

Starch (Potato)

UD Trading supplies potato starch (native food-grade potato starch, CAS 9005-25-8) as a white fine powder to food and snack manufacturers, meat and smallgoods processors, drilling fluid companies, paper and corrugating plants, adhesive and textile manufacturers and industrial users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Roma and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system. For a lower-viscosity, cleaner-tasting alternative see our tapioca starch.

Potato Starch at a glance

Chemical NamePotato Starch
Chemical Formula(C6H10O5)n
Other NamesPotato Flour Starch, Native Potato Starch
CAS No9005-25-8

Pack sizes and how to order

PackNet weightTypical buyer
25 kg multi-wall bag with PE liner25 kg (40 per pallet)Food processors, bakeries, HDD and water-bore crews
Pallet of 25 kg bags, shrink-wrapped1,000 kgSnack plants, mud plants, paper mills, distributors
Bulk bag (FIBC, jumbo bag)1,000 kgPlants, mines, contractors, scheduled supply
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Potato Starch specification

Potato starch is specified on starch content, moisture, pH and ash. Moisture matters for storage and dosing; low ash and neutral pH indicate a clean, well-washed starch with low mineral and sulphite content.

ParameterSpecification
AppearanceWhite fine powder
Starch (dry)≥ 80 %
Moisture≤ 20 %
pH5.5 – 7.5
Ash≤ 0.5 %

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: large oval granules of 15–100 µm, the largest of the common starches; about 20% amylose and 80% amylopectin with natural phosphate ester groups that give high swelling and a clear, high-viscosity, slightly stringy paste; gelatinisation 58–65 °C; peak Brabender viscosity typically 800–1,200 BU at 5%, two to three times that of corn starch; bland flavour; bulk density about 0.6–0.7 g/mL; pastes are shear-sensitive and thin on prolonged cooking or at low pH; dry starch dust is combustible.

Potato, tapioca or corn starch: which to buy

PropertyPotato starch (this product)Tapioca starchCorn (maize) starch
Paste viscosityHighestHighModerate
Clarity and flavourClear, blandClear, very blandOpaque, cereal note
Gelatinisation58–65 °C62–70 °C75–80 °C
Freeze–thaw stabilityPoor (native)ModeratePoor
Best suited toNoodles, extruded snacks, meat binding, dusting, paper, adhesives, drilling fluid lossBakery, sauces, gluten-free; see tapioca starchBatters, custards, low-cost thickening

How much potato starch do you need: worked examples

  • Meat and smallgoods binder. 2–5% of the batch for water binding and sliceability. A 1,000 kg sausage or luncheon batch at 3% uses 30 kg; disperse the starch in cold brine before adding to the bowl cutter.
  • Extruded snacks and noodles. 10–30% of the dry mix for expansion and bite; a 2,000 kg snack base at 20% uses 400 kg, 16 bags.
  • Drilling fluid-loss control. Pregelatinised or crosslinked starch is used at 10–20 kg/m³ in salt and KCl muds, with a biocide such as glutaraldehyde, below about 120 °C; a 100 m³ system at 15 kg/m³ needs 1.5 t, 60 bags. Native starch must be cooked (pregelatinised) on site before it will control filtrate; see PAC-LV for a cold-mix alternative.
  • Paper and corrugating adhesive. Stein-Hall corrugating adhesive uses 18–24% starch solids; a 1,000 L adhesive batch at 20% uses 200 kg, part cooked as carrier and the rest raw.
  • Thickening and sauces. 2–4% gives a pourable sauce; 5–6% a thick gel. A 500 L batch at 3% uses 15 kg, slurried in cold water, added to the hot batch and heated past 65 °C with gentle agitation.

What Potato Starch is used for

  • Food manufacturing. Thickener, binder, texturiser and dusting agent in noodles, snacks, smallgoods, bakery, confectionery and gluten-free products.
  • Drilling fluids. Fluid-loss control and viscosity in water-based and brine muds after pregelatinisation, alongside our drilling fluid chemicals.
  • Paper and packaging. Surface sizing, wet-end retention and corrugating adhesive.
  • Adhesives and textiles. Wallpaper paste, label adhesives, warp sizing and finishing.
  • Industrial. Biodegradable plastics, binder in briquetting and pelletising, and feedstock for modified starches and glucose.

Handling and storage

Potato starch is not classified as dangerous goods for transport and is a food ingredient, but fine starch dust is a combustible-dust and slip hazard: control dust, earth equipment and keep floors dry. Store sealed, dry and below 30 °C away from strong odours, which it absorbs, and away from pests; use within 24 months. Always read the Safety Data Sheet before use.

Why buy Potato Starch from UD Trading

Every batch is released against our specification for starch content, moisture, pH and ash under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses. Browse our general industrial chemicals and drilling fluid chemicals, or contact our team for a quote. Related products: tapioca starch, xanthan gum, guar gum. Chemical identity reference: CAS 9005-25-8 on CAS Common Chemistry.

Potato Starch FAQ

What grade is your potato starch?

Native food-grade potato starch with starch ≥ 80% on a dry basis, moisture ≤ 20%, pH 5.5–7.5 and ash ≤ 0.5%, reported on the batch COA.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.

Is it gluten free?

Yes. Potato starch is naturally gluten free; ask us for the allergen statement for your audit.

Is potato starch dangerous goods?

No. It is not classified as dangerous goods; control dust because dry starch is combustible.

Can I use native starch in drilling mud?

Only after pregelatinising it with heat; native granules do not swell in cold brine. Ask us about pregelatinised and modified drilling starches.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver interstate?

Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Starch (Potato)

Contact us for pricing, availability and documentation for Starch (Potato). Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia