Magnesium Oxide
UD Trading supplies magnesium oxide (caustic calcined magnesia, MgO, CAS 1309-48-4) at 90% minimum purity as a white to buff powder to water and wastewater plants, mines and mineral processors, drilling fluid companies, feed mills and dairy farmers, fertiliser blenders, refractory, rubber and construction-product manufacturers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Kalgoorlie, Toowoomba and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Magnesium Oxide at a glance
| Chemical Name | Magnesium Oxide |
|---|---|
| Chemical Formula | MgO |
| Other Names | Magnesia, Calcined Magnesite |
| CAS No | 1309-48-4 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag with PE liner | 25 kg (40 per pallet) | Farms, feed mills, small plants, drilling crews |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Water plants, fertiliser blenders, distributors |
| Bulk bag (FIBC) | 1,000 kg | Mines, wastewater plants, large dosing systems |
| Full container load (FCL) | 20–24 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Magnesium Oxide specification
Magnesium oxide is specified on MgO content, loss on ignition, calcium oxide, acid-insoluble matter and heavy metals. Loss on ignition shows how much has already hydrated or carbonated; reactivity (citric acid test) is reported on request for water-treatment and feed grades.
| Parameter | Specification |
|---|---|
| Appearance | White to buff powder |
| Magnesium oxide (MgO) | ≥ 90 % |
| Loss on ignition | ≤ 5.0 % |
| Calcium oxide (CaO) | ≤ 2.0 % |
| Acid-insoluble matter | ≤ 1.0 % |
| Heavy metals (as Pb) | ≤ 10 mg/kg |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 40.30 g/mol; magnesium content 60.3% (54% at 90% purity); bulk density 500–900 kg/m³ depending on grade; practically insoluble in water (about 90 mg/L) but reacts with acid; a slurry buffers at pH 9.5–10.5 and will not overshoot like lime or caustic; 1 kg of 90% MgO neutralises 2.2 kg of sulphuric acid or 2.2 kg of acidity as CaCO₃, about twice the neutralising capacity of hydrated lime per kilogram; forms dense magnesium hydroxide sludge with low volume.
Magnesium oxide, hydrated lime or caustic: which alkali to buy
| Property | Magnesium oxide 90% (this product) | Hydrated lime | Caustic soda |
|---|---|---|---|
| Neutralising capacity per kg (as CaCO₃) | 2.2 kg | 1.2 kg | 1.25 kg |
| Maximum pH reached | About 10.5 (self-limiting) | 12.4 | 14 |
| Sludge | Dense, low volume, easy to dewater | Gypsum-rich, bulky | None, but high dissolved sodium |
| Handling | Non-corrosive powder | Corrosive dust | DG Class 8, heat on dissolving |
| Best suited to | Metal precipitation, AMD, wastewater pH, feed and fertiliser, drilling buffers | Bulk neutralisation, softening, soil; see hydrated lime | Fast pH lift, cleaning; see caustic soda |
How much magnesium oxide do you need: worked examples
- Acid mine drainage or acid effluent. MgO + H₂SO₄ → MgSO₄ + H₂O: 40 g of MgO neutralises 98 g of acid, so 1 kg of 90% product neutralises 2.2 kg of H₂SO₄ or 2.2 kg of acidity as CaCO₃. A 2 ML/day flow at 300 mg/L acidity (600 kg/day) needs about 270 kg/day of MgO, against about 900 kg/day of hydrated lime, with roughly 40% less sludge.
- Heavy-metal precipitation. Most metals (Cu, Ni, Zn, Mn, Fe) precipitate as hydroxides between pH 9 and 10.5, which is exactly where an MgO slurry holds. Removing 50 mg/L of nickel from 1 ML/day needs about 1 kg of Mg(OH)₂-equivalent (0.7 kg of MgO) per kg of Ni, plus the acidity demand; a jar test sets the final dose, typically 1.5–3 times stoichiometric.
- Dairy grass-tetany prevention. 50–60 g of MgO per cow per day through spring, dusted on pasture or mixed in feed. A 400-cow herd at 60 g uses 24 kg a day, about one bag, or 0.7 t a month.
- Drilling fluid pH buffer. 1–3 kg/m³ of MgO holds pH at 9.5–10 in polymer and formate systems without the viscosity hump of lime; a 100 m³ system at 2 kg/m³ uses 200 kg, eight bags.
- Fertiliser magnesium. To apply 20 kg of Mg per hectare you need 20 ÷ 0.54 = 37 kg of 90% MgO per hectare, against 200 kg of magnesium sulphate (9.8% Mg); 200 ha needs 7.4 t of MgO.
What Magnesium Oxide is used for
- Water and wastewater treatment. pH control, heavy-metal precipitation, phosphate and ammonia removal as struvite, odour control and sludge conditioning.
- Mining and mineral processing. Acid mine drainage neutralisation, nickel and cobalt precipitation, uranium and rare-earth circuits, alongside our mining chemicals.
- Drilling fluids. pH and alkalinity buffer in water-based and formate muds, with our drilling fluid chemicals.
- Agriculture and animal nutrition. Magnesium supplement for dairy, beef and sheep, and magnesium source for fertiliser blends with our agricultural range.
- Industrial. Refractories and ceramics, rubber vulcanisation, Sorel and magnesia cements, fuel-oil additive and pharmaceuticals.
Handling and storage
Magnesium oxide is not classified as dangerous goods for transport and is of low toxicity, but the powder irritates eyes and airways: use a dust mask and eye protection when tipping bags. It slowly absorbs moisture and carbon dioxide from air, which raises loss on ignition and lowers reactivity, so keep bags sealed, dry and off the ground and use within 12 months. Always read the Safety Data Sheet before use.
Why buy Magnesium Oxide from UD Trading
Every batch is released against our specification for MgO, loss on ignition, calcium oxide and heavy metals under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses. Browse our water treatment chemicals, mining chemicals and agricultural products, or contact our team for a quote. Related products: zinc oxide, calcium carbonate. Chemical identity reference: CAS 1309-48-4 on CAS Common Chemistry.
Magnesium Oxide FAQ
What grade is your magnesium oxide?
Caustic calcined magnesia at 90% MgO minimum, loss on ignition ≤ 5%, CaO ≤ 2%, heavy metals ≤ 10 mg/kg, reported on the batch COA; reactivity data on request.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.
How does it compare with lime for neutralising?
Kilogram for kilogram it neutralises about twice as much acid as hydrated lime, cannot push pH past about 10.5, and produces a denser sludge. It reacts more slowly, so allow 30–60 minutes of contact time.
Is magnesium oxide dangerous goods?
No. It is not classified as dangerous goods for transport. Avoid dust and follow the SDS.
Can it be used in stockfeed?
Yes. It is the standard magnesium supplement for grass-tetany prevention at 50–60 g per cow per day; ask us about feed-grade documentation.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to farms and mine sites?
Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet, bulk-bag and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Magnesium Oxide
Contact us for pricing, availability and documentation for Magnesium Oxide. Call 07 3040 7298 or email sales@udtrading.com.au.

