Ammonium Chloride
UD Trading supplies ammonium chloride (sal ammoniac, NH₄Cl, CAS 12125-02-9) at 99.5% minimum assay as a white crystalline powder to drilling and well-service companies, galvanisers and metal finishers, battery and electronics manufacturers, feed mills, fertiliser blenders, textile printers, laboratories and chemical plants across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Sydney, Melbourne, Perth, Adelaide, Darwin and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Ammonium Chloride at a glance
| Chemical Name | Ammonium Chloride |
|---|---|
| Chemical Formula | NH4Cl |
| Other Names | Sal Ammoniac, Salmiac, Nushadir Salt |
| CAS No | 12125-02-9 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag with PE liner | 25 kg (40 per pallet) | Galvanisers, well-service crews, feed mills, laboratories |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Mud plants, battery makers, fertiliser blenders, distributors |
| Bulk bag (FIBC, jumbo bag) | 1,000 kg | Plants, mines, contractors, scheduled supply |
| Full container load (FCL) | 20–24 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Ammonium Chloride specification
Ammonium chloride is specified on assay, loss on drying, sulphate and iron. Low sulphate and iron matter for galvanising flux clarity, battery electrolyte and feed use.
| Parameter | Specification |
|---|---|
| Appearance | White crystalline powder |
| Assay (NH4Cl, dry) | ≥ 99.5 % |
| Loss on drying | ≤ 0.5 % |
| Sulphate | ≤ 0.02 % |
| Iron (Fe) | ≤ 10 mg/kg |
| Heavy metals (as Pb) | ≤ 10 mg/kg |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 53.49 g/mol; 26.2% nitrogen and 66.3% chloride; solubility 37 g per 100 g water at 20 °C (about 280 g/L) rising to 77 g at 100 °C; a 1% solution has pH about 5, mildly acidic; dissolving is endothermic (about 280 kJ absorbed per kg), so 1 kg in 10 L of water cools the mixture by about 6 °C; sublimes at 338 °C without melting; the ammonium ion exchanges onto clay surfaces, which is the basis of its use as a clay stabiliser.
Ammonium chloride, potassium chloride or ammonium sulphate: which to buy
| Property | Ammonium chloride (this product) | Potassium chloride | Ammonium sulphate |
|---|---|---|---|
| Nitrogen | 26.2% N | None (60% K₂O) | 21% N, 24% S |
| Clay stabilisation in acid jobs | Standard at 2–3% in HCl and THPS washes; acid-stable | Standard in water-based muds; precipitates in some acids | Not used |
| Galvanising flux | Essential component with zinc chloride | No | No |
| Soil effect | Acidifying, chloride load | Chloride load, neutral | Strongly acidifying |
| See also | potassium chloride | On request |
How much ammonium chloride do you need: worked examples
- Clay stabiliser in acidising and THPS washes. 2–3% w/v in hydrochloric acid treatments and 0.5–1% in THPS iron sulphide washes to stop clay swelling and fines migration. A 10 m³ acid job at 2% needs 200 kg, eight bags; a 10 m³ THPS wash at 0.75% needs 75 kg.
- Galvanising flux. Pre-flux baths run as zinc ammonium chloride at 300–500 g/L total salts with an NH₄Cl:ZnCl₂ ratio near 1.5:1 by weight (the triple salt). A 5,000 L flux tank at 400 g/L needs about 1,200 kg of ammonium chloride and 800 kg of zinc chloride, topped up as drag-out removes about 2–4 g of salts per m² of steel.
- Battery electrolyte. Zinc–carbon cell paste uses a 25% ammonium chloride solution with zinc chloride; 1,000 L of 25% solution takes 250 kg, ten bags, in deionised water.
- Stockfeed urinary acidifier. 0.5–1.0% of the ration for feedlot lambs and steers to lower urine pH and reduce urinary calculi, under veterinary or nutritionist direction; a mill producing 20 t/day of feedlot ration at 0.5% uses 100 kg a day, four bags.
- Nitrogen for rice and chloride-tolerant crops. To apply 50 kg of N per hectare you need 50 ÷ 0.262 = 191 kg per hectare; 100 ha needs 19 t. Account for the 127 kg/ha of chloride that comes with it.
What Ammonium Chloride is used for
- Oil and gas. Clay stabiliser in acidising, completion and workover fluids, iron sulphide washes and low-pH brines, alongside our oilfield chemicals.
- Galvanising and metal finishing. Flux for hot-dip galvanising, tinning and soldering, and pickling additive.
- Batteries and electronics. Electrolyte for zinc–carbon dry cells and etching baths.
- Agriculture and animal nutrition. Nitrogen fertiliser for rice and coconut, urinary acidifier in ruminant feed, with our agricultural range.
- Textiles, leather and chemical. Printing and dyeing assistant, leather processing, resin curing agent, cooling-pack ingredient and laboratory reagent.
Handling and storage
Ammonium chloride is not classified as dangerous goods for transport but is harmful if swallowed and irritating to eyes: wear eye protection and a dust mask when tipping bags. It is hygroscopic and corrosive to mild steel, copper and brass in solution: keep bags sealed, dry and off the ground, and use plastic, FRP or stainless equipment. Do not mix with alkalis (releases ammonia) or with strong oxidisers. Always read the Safety Data Sheet before use.
Why buy Ammonium Chloride from UD Trading
Every batch is released against our specification for assay, loss on drying, sulphate and iron under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our oil and gas chemicals, general industrial chemicals and agricultural products, or contact our team for a quote. Related products: ammonium bicarbonate, calcium chloride. Chemical identity reference: CAS 12125-02-9 on CAS Common Chemistry.
Ammonium Chloride FAQ
What grade is your ammonium chloride?
99.5% NH₄Cl minimum, loss on drying ≤ 0.5%, sulphate ≤ 0.02%, iron ≤ 10 mg/kg, reported on the batch COA.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.
How much do I add to an acid job?
2–3% w/v, 20–30 kg per cubic metre of acid, dissolved in the water before the acid is added.
Is ammonium chloride dangerous goods?
No. It is not classified as dangerous goods for transport, but it is harmful if swallowed. Follow the SDS.
Can it be used in stockfeed?
Yes, as a urinary acidifier at 0.5–1% of the ration under nutritionist direction; ask us for feed-grade documentation.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to drilling supply bases and galvanising plants?
Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Ammonium Chloride
Contact us for pricing, availability and documentation for Ammonium Chloride. Call 07 3040 7298 or email sales@udtrading.com.au.

