Ammonium Bicarbonate
UD Trading supplies ammonium bicarbonate (NH₄HCO₃, baker’s ammonia, E503, CAS 1066-33-7) at 99% minimum assay as white crystals to biscuit and bakery manufacturers, rubber and foam compounders, fertiliser blenders, fire-retardant and ceramic producers, leather tanners and chemical manufacturers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Ammonium Bicarbonate at a glance
| Chemical Name | Ammonium Bicarbonate |
|---|---|
| Chemical Formula | NH4HCO3 |
| Other Names | Ammonium Hydrogen Carbonate, Bicarbonate of Ammonia, Baker’s Ammonia |
| CAS No | 1066-33-7 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag with PE liner | 25 kg (40 per pallet) | Bakeries, rubber compounders, laboratories |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Biscuit manufacturers, fertiliser blenders, distributors |
| Bulk bag (FIBC, jumbo bag) | 1,000 kg | Plants, mines, contractors, scheduled supply |
| Full container load (FCL) | 20–24 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Ammonium Bicarbonate specification
Ammonium bicarbonate is specified on assay, chloride, sulphate, non-volatile residue and heavy metals. Low residue and heavy metals make one grade suitable for food, technical and rubber use.
| Parameter | Specification |
|---|---|
| Appearance | White crystals |
| Assay (NH4HCO3) | ≥ 99.0 % |
| Chloride | ≤ 0.003 % |
| Sulphate | ≤ 0.005 % |
| Non-volatile residue | ≤ 0.02 % |
| Heavy metals (as Pb) | ≤ 5 mg/kg |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 79.06 g/mol; 17.7% nitrogen; solubility 21 g per 100 g water at 20 °C; a 1% solution has pH about 7.8; decomposes completely to ammonia, carbon dioxide and water from about 36 °C, which is why it leaves no residue in baked goods: NH₄HCO₃ → NH₃ + CO₂ + H₂O, releasing 0.77 kg of ammonia and carbon dioxide (about 600 L of gas at room temperature) per kg; it smells of ammonia in the bag, and bags lose weight slowly in hot warehouses, so store cool and sealed.
Ammonium bicarbonate, sodium bicarbonate or baking powder: which leavening to buy
| Property | Ammonium bicarbonate (this product) | Sodium bicarbonate | Baking powder |
|---|---|---|---|
| Gas yield per kg | Highest: NH₃ + CO₂, about 600 L | CO₂ only, about 145 L without acid | Lower, acid-balanced |
| Residue in product | None; all gas | Sodium carbonate, raises pH and sodium | Phosphate or tartrate salts |
| Best suited to | Thin, dry, low-moisture products: crackers, biscuits, wafers, gingerbread | Cakes and moist goods with an acid; see sodium bicarbonate | Home and general baking |
| Limitation | Ammonia odour remains in moist, thick products | Soapy taste if unbalanced | Cost |
How much ammonium bicarbonate do you need: worked examples
- Biscuit and cracker dough. 0.5–1.5% on flour weight, often alongside sodium bicarbonate. A 1,000 kg flour batch at 1.0% uses 10 kg; a plant running 40 t of flour a day uses 400 kg, 16 bags a day or about 10 t a month.
- Rubber and EVA foam blowing. 2–8 parts per hundred of rubber as a chemical blowing agent. A 500 kg compound with 250 kg of polymer at 5 phr needs 12.5 kg; the gas evolved at 5 phr is about 7 m³ per batch, so vent moulds accordingly.
- Nitrogen fertiliser. 17.7% N: to apply 50 kg of N per hectare you need 50 ÷ 0.177 = 283 kg per hectare, incorporated immediately because it volatilises on the surface; 100 ha needs 28 t. For stable broadacre nitrogen, urea at 46% N is the usual choice.
- pH buffer and ammonia source. A 5% solution (50 kg per 1,000 L) gives a pH 7.8–8.0 buffer used in dyeing, electroplating and catalyst manufacture; it also removes carbon dioxide and supplies ammonia in flue-gas and CO₂-capture pilot systems.
- Leather deliming. 1–2% on pelt weight in place of ammonium sulphate to reduce effluent sulphate; 5,000 kg of pelts at 1.5% uses 75 kg, three bags.
What Ammonium Bicarbonate is used for
- Food manufacturing. Leavening agent (E503) for biscuits, crackers, wafers and confectionery under food-grade handling.
- Rubber, plastics and foam. Blowing agent for sponge rubber, EVA foam and expanded products.
- Agriculture. Fast-acting nitrogen and buffering agent in blends, with our agricultural range.
- Leather and textiles. Deliming agent and dye-bath buffer.
- Industrial and chemical. Fire-retardant formulations, ceramics, catalyst manufacture, ammonia and CO₂ source in synthesis.
Handling and storage
Ammonium bicarbonate is not classified as dangerous goods for transport and is of low toxicity, but it releases ammonia, which irritates eyes and airways: open bags in ventilated areas and wear a dust mask and eye protection. Store sealed, cool (below 30 °C) and dry, away from acids and alkalis; warm storage causes weight loss and caking. Always read the Safety Data Sheet before use.
Why buy Ammonium Bicarbonate from UD Trading
Every batch is released against our specification for assay, chloride, sulphate, residue and heavy metals under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses for pallet orders. Browse our general industrial chemicals and agricultural products, or contact our team for a quote. Related products: ammonium chloride, sodium bicarbonate. Chemical identity reference: CAS 1066-33-7 on CAS Common Chemistry.
Ammonium Bicarbonate FAQ
What grade is your ammonium bicarbonate?
99.0% NH₄HCO₃ minimum, chloride ≤ 0.003%, sulphate ≤ 0.005%, non-volatile residue ≤ 0.02%, reported on the batch COA; suitable for food and technical use.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.
Is it food grade?
The grade meets the purity limits used for food additive E503; ask us for the food-grade documentation set for your audit.
Is ammonium bicarbonate dangerous goods?
No. It is not classified as dangerous goods for transport. Expect an ammonia smell when bags are opened.
Why does my product taste of ammonia?
Ammonium bicarbonate only works in thin, dry products where the ammonia bakes out; in cakes or moist items switch to sodium bicarbonate with an acid.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver interstate?
Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Ammonium Bicarbonate
Contact us for pricing, availability and documentation for Ammonium Bicarbonate. Call 07 3040 7298 or email sales@udtrading.com.au.

