UD Trading Pty Ltd company logo

Sulphuric Acid

UD Trading supplies sulphuric acid 98% (H₂SO₄, CAS 7664-93-9) in IBCs and drums to mines and mineral processors, fertiliser and chemical manufacturers, water and wastewater plants, metal finishers, battery and galvanising works and industrial plants across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Kalgoorlie, Mount Isa, Gladstone and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Sulphuric Acid at a glance

Chemical NameSulphuric Acid
Chemical FormulaH2SO4
Other NamesOil of Vitriol, Battery Acid, Hydrogen Sulphate
CAS No7664-93-9

Pack sizes and how to order

PackNet quantityTypical buyer
20 L drumAbout 37 kgTrials, laboratories, workshops, small plants
200 L drumAbout 368 kgWorkshops, small and medium users
IBC (acid-rated)1,000 L (about 1,840 kg)Water plants, galvanisers, laboratories, workshops, small plants
Scheduled contract supplyMonthly volumesPlants with bulk storage

Pricing is quoted per order, delivered, usually within one business day of your enquiry; IBCs are supplied on a deposit or exchange basis. Contract pricing is available for scheduled volumes. Lead time depends on quantity: IBC orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Sulphuric Acid specification

Sulphuric acid is specified on strength, iron, chloride and residue on ignition. Low iron and chloride matter for electrolyte, electroplating and food-adjacent use; residue indicates dissolved metals and sulphates.

ParameterSpecification
AppearanceClear colourless oily liquid
Sulphuric acid (H2SO4)≥ 98 %
Iron (Fe)≤ 20 mg/kg
Chloride≤ 5 mg/kg
Residue on ignition≤ 0.02 %

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 98.08 g/mol; 98% acid density about 1.84 kg/L, so each litre contains about 1,800 g of H₂SO₄ and 36.8 acid equivalents; freezing point of 98% acid about 3 °C (store above 10 °C in cold regions); boiling point about 337 °C; heat of dilution about 880 kJ per kg of acid when diluted to a weak solution, so mixing is violently exothermic: always add acid slowly to water, never water to acid; 98% acid is strongly dehydrating and chars organic material.

Sulphuric acid or hydrochloric acid: which to buy

PropertySulphuric acid 98% (this product)Hydrochloric acid 32%
Acid equivalents per litre36.8 eq/L10.2 eq/L
Acid per tonne of freightAbout 980 kgAbout 320 kg
FumesLow at ambient; mist when hotHCl vapour; vented containers
MaterialsCarbon steel acceptable at 98%; never below 93% in steelHDPE, PP, rubber-lined only
By-productsSulphate; calcium sulphate scale on carbonateSoluble chlorides, no scale
Best suited toBulk pH control, leaching, fertiliser, alum and sulphate productionDescaling, pickling, pools; see hydrochloric acid

How much sulphuric acid do you need: worked examples

  • Lowering alkalinity or pH at a plant. Each 1 mg/L of alkalinity (as CaCO₃) consumes 0.98 mg/L of H₂SO₄, so 1 kg of 98% acid removes about 1.0 kg of alkalinity. Cutting alkalinity by 20 mg/L in a 10 ML/day plant takes 10,000 m³ × 20 g/m³ = 200 kg of acid a day, about 111 L of 98% acid.
  • Diluting to 10% for pickling or pH dosing. 1 kg of 98% acid makes 9.8 kg of 10% solution, so add 8.8 kg of water per kg of acid; per litre of 98% acid (1.84 kg) add 16.2 L of water. The temperature rise without cooling can exceed 60 °C: add the acid in a thin stream into stirred water in a vented, acid-resistant vessel.
  • Heap or vat leaching. Acid consumption for oxide copper, uranium and nickel laterite ores is typically 20–60 kg of H₂SO₄ per tonne of ore. A 5,000 t/day heap at 30 kg/t uses 150 t of acid a day, about 80 IBCs.
  • Neutralising spent acid. 1 kg of H₂SO₄ is neutralised by 0.82 kg of caustic soda, 1.08 kg of soda ash or 0.84 kg of 90% hydrated lime, producing about 1.8 kg of gypsum with lime.
  • Making zinc or copper sulphate. ZnO + H₂SO₄ → ZnSO₄ + H₂O: 1 kg of zinc oxide needs 1.21 kg of acid (0.67 L of 98%) and yields 1.98 kg of anhydrous zinc sulphate.

What Sulphuric Acid is used for

  • Mining and mineral processing. Heap, vat and agitation leaching of copper, uranium, nickel, cobalt and rare earths; pH control in flotation; alongside our mining chemicals.
  • Fertiliser and chemicals. Superphosphate, ammonium sulphate, aluminium sulphate, titanium dioxide, detergents and dyes.
  • Water and wastewater. pH and alkalinity control, membrane cleaning, chlorine dioxide generation.
  • Metals and energy. Pickling and anodising, lead-acid battery electrolyte (diluted), boiler-water treatment and ion-exchange regeneration.
  • Pulp, paper, textiles and food. pH control, starch processing and effluent treatment.

Handling and storage

Sulphuric acid 98% is highly corrosive and classified as dangerous goods for transport: UN 1830, Class 8, Packing Group II. It causes severe burns, reacts violently with water, bases, metals and organics, and generates hydrogen with metals. Wear a face shield, goggles, acid-resistant gloves, apron and boots; keep an emergency shower and eyewash within 10 m. Store in carbon steel (98% only), HDPE-lined or acid-rated IBCs, bunded to 110% of the largest container, away from caustics, hypochlorite, cyanides and metals. Always read the Safety Data Sheet before use.

Why buy Sulphuric Acid from UD Trading

Every batch is released against our specification for strength, iron, chloride and residue under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation and placarding, and we hold stock in multiple Australian warehouses. Browse our mining chemicals, water treatment chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 7664-93-9 on CAS Common Chemistry.

Sulphuric Acid FAQ

What strength is your sulphuric acid?

98% H₂SO₄ minimum, iron ≤ 20 mg/kg, chloride ≤ 5 mg/kg, residue on ignition ≤ 0.02%, reported on the batch COA.

What pack sizes do you supply?

1,000 L acid-rated IBCs and drums containers, with scheduled contract supply for plants with storage.

Is sulphuric acid dangerous goods?

Yes. UN 1830, Class 8 corrosive, Packing Group II. We ship with the correct DG documentation and SDS.

How do I dilute 98% acid safely?

Add acid slowly to cold, stirred water in a vented acid-resistant vessel, never the reverse. One litre of 98% acid plus 16 L of water gives about 10%; expect a large temperature rise.

Can I store 98% acid in steel tanks?

Yes, carbon steel is standard for 93–98% acid at ambient temperature; dilute acid attacks steel rapidly, so diluted acid needs HDPE, FRP or lined storage.

What is the lead time?

IBC orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days.

Do you deliver to mine sites?

Yes. We deliver Australia-wide by DG-licensed road and rail freight, including Kalgoorlie, Mount Isa and the Pilbara, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled drum, IBC and container volumes.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Sulphuric Acid

Contact us for pricing, availability and documentation for Sulphuric Acid. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia