Caustic Soda
UD Trading supplies caustic soda (sodium hydroxide, NaOH, CAS 1310-73-2) flakes and pearls with at least 99.0% NaOH to water and wastewater plants, cleaning and detergent manufacturers, mines and mineral processors, food and beverage processors, soap and biodiesel makers and chemical plants across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Kalgoorlie, Townsville, Gladstone and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Caustic Soda at a glance
| Chemical Name | Sodium Hydroxide |
|---|---|
| Chemical Formula | NaOH |
| Other Names | Lye, Sodium Hydrate, Caustic Soda |
| CAS No | 1310-73-2 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag with PE liner (flakes or pearls) | 25 kg (40 per pallet) | Cleaning manufacturers, water plants, workshops, food processors |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Councils, distributors, mid-size plants |
| Bulk bag (FIBC) | 1,000 kg | Mines, alumina and mineral processing, large utilities |
| Full container load (FCL) | 24–26 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Caustic Soda specification
Caustic soda is specified on NaOH content, carbonate, chloride, iron and sulphate. Low carbonate matters for clean dissolving and accurate dosing; low chloride and iron matter for food, textile and membrane cleaning use.
| Parameter | Specification |
|---|---|
| Appearance | White flakes / pearls |
| Sodium hydroxide (NaOH) | ≥ 99.0 % |
| Sodium carbonate (Na2CO3) | ≤ 0.5 % |
| Sodium chloride (NaCl) | ≤ 0.05 % |
| Iron (as Fe2O3) | ≤ 10 mg/kg |
| Sulphate (Na2SO4) | ≤ 0.02 % |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 40.00 g/mol; melting point 318 °C; solubility 109 g per 100 g water at 20 °C; heat of solution −44.5 kJ/mol, about 1,110 kJ per kg, so dissolving is strongly exothermic; a 1% solution has pH 13.3; 1 g/m³ of NaOH adds 1.25 mg/L of alkalinity as CaCO₃; strongly hygroscopic and absorbs CO₂ from air to form sodium carbonate.
Flakes, pearls or 50% liquid: which form to buy
| Property | Flakes 99% (this product) | Pearls 99% (this product) | Liquid 46–50% |
|---|---|---|---|
| NaOH per tonne shipped | 990 kg | 990 kg | 460–500 kg |
| Freight per tonne of NaOH | Baseline | Baseline | About double |
| Handling | Bags, manual or hopper dissolving; some dust | Free-flowing, low dust, meters well | IBC or tanker, pumps; crystallises below 12 °C at 50% |
| Best suited to | Remote sites, cleaning manufacturers, batch make-up | Automatic dosing hoppers, food plants | Plants with bulk tanks near a port |
How much caustic soda do you need: worked examples
- Making a 10% solution. 100 kg of caustic soda into 900 L of water gives 1,000 kg (about 905 L) of 10% w/w solution. Dissolving 1 kg in 10 L releases about 1,110 kJ and raises the mixture about 24 °C, so a 100 kg batch into cold water can approach boiling: add caustic to water slowly, in stages, with stirring and cooling, never water to caustic.
- Neutralising an acid stream. NaOH + HCl → NaCl + H₂O and 2 NaOH + H₂SO₄ → Na₂SO₄ + 2 H₂O. 1 kg of NaOH neutralises 0.91 kg of hydrochloric acid (100% basis, about 2.8 kg of 32% hydrochloric acid) or 1.23 kg of sulphuric acid.
- pH correction at a water plant. To add 10 mg/L of alkalinity (as CaCO₃) to a 10 ML/day plant: 10 ÷ 1.25 = 8 g/m³, so 10,000 m³ × 8 g = 80 kg/day of NaOH, about 3 bags a day. Where overshoot is a risk, soda ash (pH 11.4 in solution) is the gentler alkali.
- CIP caustic wash. Food and beverage CIP runs at 1–2% NaOH. A 2,000 L CIP tank at 1.5% needs 2,000 × 15 g = 30 kg per fill. Follow with a citric acid rinse to remove scale.
- Soap making. Saponification needs about 0.14 kg of NaOH per kg of tallow and 0.19 kg per kg of coconut oil. A 500 kg tallow batch uses 70 kg, nearly three bags.
What Caustic Soda is used for
- Water and wastewater treatment. pH correction, alkalinity, heavy-metal precipitation and membrane cleaning, alongside sodium hypochlorite.
- Cleaning and detergents. Degreasers, oven and drain cleaners, bottle washing and CIP.
- Mining and mineral processing. Bayer-process alumina digestion, pH control in flotation and leach circuits, acid neutralisation.
- Food and beverage. Peeling, caustic washing, CIP and pH control under food-grade handling.
- Chemical manufacture. Soap, biodiesel catalyst, sodium salts, textiles, pulp and paper.
Handling and storage
Caustic soda is highly corrosive and classified as dangerous goods for transport: UN 1823, Class 8, Packing Group II. It causes severe burns to skin and eyes: wear chemical goggles, face shield, gloves and protective clothing, and keep an eyewash within reach. Dissolving generates heat and spattering; always add caustic to water, never water to caustic. Store bags sealed, dry, off the ground and away from acids, aluminium, zinc and galvanised steel; it absorbs moisture and CO₂ from air and will cake. Always read the Safety Data Sheet before use.
Why buy Caustic Soda from UD Trading
Every batch is released against our specification for NaOH, carbonate, chloride, iron and sulphate under our ISO 9001:2015 quality system, we ship as licensed Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses. Browse our cleaning chemicals, water treatment chemicals and mining chemicals, or contact our team for a quote. Related alkalis: potassium hydroxide, hydrated lime. Chemical identity reference: CAS 1310-73-2 on CAS Common Chemistry.
Caustic Soda FAQ
What grade is your caustic soda?
Flakes and pearls at 99.0% NaOH minimum, carbonate ≤ 0.5%, chloride ≤ 0.05%, iron ≤ 10 mg/kg, reported on the batch COA.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.
Flakes or pearls?
Both are 99% NaOH. Pearls flow freely and meter well in automatic dosing hoppers; flakes dissolve quickly and suit manual batch make-up.
Is caustic soda dangerous goods?
Yes. UN 1823, Class 8 corrosive, Packing Group II. We ship with the correct DG documentation and SDS.
How much heat is released when dissolving?
About 1,110 kJ per kg. One kilogram in 10 litres of water warms the mixture by roughly 24 °C, so large batches must be made in stages with cooling.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to mine sites and regional plants?
Yes. We deliver Australia-wide by DG-licensed road and rail freight, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet, bulk-bag and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Caustic Soda
Contact us for pricing, availability and documentation for Caustic Soda. Call 07 3040 7298 or email sales@udtrading.com.au.

