UD Trading Pty Ltd company logo

Sodium Bicarbonate

UD Trading supplies sodium bicarbonate (NaHCO₃, bicarbonate of soda, CAS 144-55-8) at 99.0–100.5% assay as a white crystalline powder to pool and spa suppliers, water treatment plants, drilling fluid companies, feed mills and dairies, food and beverage manufacturers, cleaning-product makers, flue-gas treatment and blast-cleaning operators across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Roma, Townsville and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Sodium Bicarbonate at a glance

Chemical NameSodium Bicarbonate
Chemical FormulaNaHCO₃
Other NamesBaking Soda, Bicarbonate of Soda
CAS No144-55-8

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag with PE liner25 kg (40 per pallet)Pool shops, food processors, dairies, cleaning manufacturers
Pallet of 25 kg bags, shrink-wrapped1,000 kgWater plants, feed mills, distributors, mud plants
Bulk bag (FIBC)1,000 kgFlue-gas sorbent injection, large plants
Full container load (FCL)24–26 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Sodium Bicarbonate specification

Sodium bicarbonate is specified on assay, pH, loss on drying, chloride, heavy metals and arsenic. The tight assay and low heavy-metal limits mean one grade serves food, feed, pool and technical use.

ParameterSpecification
AppearanceWhite crystalline powder
Assay (NaHCO3, dry)99.0 – 100.5 %
pH (freshly prepared 1%)8.0 – 8.6
Loss on drying≤ 0.25 %
Chloride≤ 0.02 %
Heavy metals (as Pb)≤ 5 mg/kg
Arsenic≤ 1.0 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 84.01 g/mol; solubility 9.6 g per 100 g water at 20 °C (about 96 g/L) rising to 16.5 g at 60 °C; a 1% solution has pH 8.3, and the pH stays near 8.3 whatever the dose, which is why it buffers rather than overshoots; 1 g/m³ adds 0.60 mg/L of alkalinity as CaCO₃; it begins to decompose above about 50 °C and converts fully to soda ash at 100–200 °C: 2 NaHCO₃ → Na₂CO₃ + CO₂ + H₂O, losing 37% of its mass as gas and water.

Sodium bicarbonate or soda ash: which alkali to buy

PropertySodium bicarbonate (this product)Soda ash (sodium carbonate)
pH of 1% solution8.311.4
What it movesTotal alkalinity, with little pH changepH, with some alkalinity
Alkalinity per kg (as CaCO₃)0.60 kg0.94 kg
HandlingNon-irritant, food safeIrritant dust
Best suited toPool and spa alkalinity, buffering, feed, food, cleaning, mud cement treatmentpH lift, water softening, glass; see soda ash

How much sodium bicarbonate do you need: worked examples

  • Raising pool total alkalinity. To raise alkalinity by 10 mg/L in 50,000 L: 50 m³ × 10 g/m³ ÷ 0.60 = 840 g. Taking a pool from 60 to 100 mg/L takes about 3.4 kg; add over the deep end with the pump running and retest after 6 hours. Use soda ash if pH, not alkalinity, is low.
  • Treating cement contamination in drilling mud. Ca(OH)₂ + NaHCO₃ → CaCO₃ + NaOH + H₂O: 84 g of bicarbonate removes 74 g of lime, so 1.14 kg per kg of lime. A 100 m³ system showing 300 mg/L excess lime holds 30 kg of lime and needs about 34 kg of bicarbonate, plus a pilot test; typical treatments run 0.5–2 kg/m³.
  • Dairy rumen buffer. 100–200 g per cow per day in the ration during heat or high-grain feeding. A 500-cow herd at 150 g uses 75 kg a day, three bags, about 2.3 t a month.
  • Flue-gas desulphurisation by dry sorbent injection. 2 NaHCO₃ + SO₂ + ½ O₂ → Na₂SO₄ + 2 CO₂ + H₂O: 2.6 kg of bicarbonate per kg of SO₂ at stoichiometry; at a normalised stoichiometric ratio of 1.3, 3.4 kg/kg. A boiler emitting 20 kg/h of SO₂ needs about 68 kg/h, 1.6 t a day.
  • Alkalinity at a water or wastewater plant. Adding 15 mg/L of alkalinity to a 5 ML/day flow needs 5,000 × 15 ÷ 0.60 = 125 kg a day, five bags, without raising pH above 8.3.

What Sodium Bicarbonate is used for

  • Pools and spas. Total alkalinity increaser and pH buffer; pairs with pool salt, cyanuric acid and calcium chloride for water balance.
  • Drilling fluids. Treats cement contamination and calcium in water-based muds, and buffers pH in polymer systems.
  • Water treatment. Alkalinity for nitrification and coagulation, corrosion control, membrane cleaning.
  • Food, feed and dairy. Leavening, acidity regulator (E500), rumen buffer and electrolyte in stockfeed.
  • Cleaning and industrial. Mild abrasive and buffer in cleaners, soda blasting, flue-gas desulphurisation and fire-extinguishing powders.

Handling and storage

Sodium bicarbonate is not classified as dangerous goods for transport and is not hazardous to handle; use a dust mask when tipping bags. Keep bags sealed, dry and below 40 °C, because moisture and heat cause caking and slow conversion to carbonate. Always read the Safety Data Sheet before use.

Why buy Sodium Bicarbonate from UD Trading

Every batch is released against our specification for assay, pH, chloride, heavy metals and arsenic under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses for pallet and bulk orders. Browse our water treatment chemicals, cleaning chemicals and drilling fluid chemicals, or contact our team for a quote. Chemical identity reference: CAS 144-55-8 on CAS Common Chemistry.

Sodium Bicarbonate FAQ

What grade is your sodium bicarbonate?

99.0–100.5% NaHCO₃ with heavy metals ≤ 5 mg/kg and arsenic ≤ 1 mg/kg, reported on the batch COA; suitable for pool, technical, feed and food use.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.

How much raises pool alkalinity by 10 mg/L?

About 170 g per 10,000 L, so 840 g for a 50,000 L pool.

Is sodium bicarbonate dangerous goods?

No. It is not classified as dangerous goods for transport and is safe to handle.

Bicarbonate or soda ash for my pool?

Bicarbonate when total alkalinity is low and pH is acceptable; soda ash when pH itself needs lifting. Bicarbonate will not push pH past about 8.3.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to regional and remote sites?

Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Sodium Bicarbonate

Contact us for pricing, availability and documentation for Sodium Bicarbonate. Call 07 3040 7298 or email info@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia