UD Trading Pty Ltd company logo

Potassium Hydroxide (KOH)

UD Trading supplies potassium hydroxide (caustic potash, KOH, CAS 1310-58-3) flakes at 90% minimum KOH to liquid-fertiliser and fertigation blenders, soap and biodiesel manufacturers, cleaning-product makers, drilling fluid companies, battery and electroplating works, food processors and chemical plants across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Toowoomba and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Potassium Hydroxide at a glance

Chemical NamePotassium Hydroxide
Chemical FormulaKOH
Other NamesCaustic Potash, Lye, Potash Lye
CAS No1310-58-3

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag with PE liner25 kg (40 per pallet)Soap and biodiesel makers, cleaning manufacturers, workshops
Pallet of 25 kg bags, shrink-wrapped1,000 kgFertiliser blenders, distributors, mid-size plants
Bulk bag (FIBC, jumbo bag)1,000 kgPlants, mines, contractors, scheduled supply
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Potassium Hydroxide specification

Potassium hydroxide is specified on KOH content, carbonate, chloride, sulphate and iron. Low chloride and iron matter for fertiliser, food and battery use; low carbonate means accurate dosing and clear solutions.

ParameterSpecification
AppearanceWhite flakes / pearls
Potassium hydroxide (KOH)≥ 90 %
Potassium carbonate (K2CO3)≤ 1.0 %
Chloride (KCl)≤ 0.05 %
Sulphate≤ 0.01 %
Iron (Fe)≤ 10 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 56.11 g/mol; 90% flakes contain about 62.7% potassium (K) and 75.5% K₂O equivalent, the remainder being mainly water of hydration; solubility 112 g per 100 g water at 20 °C; heat of solution about 1,030 kJ per kg of KOH, so dissolving 1 kg in 10 L of water warms the mixture by roughly 22 °C; a 1% solution has pH 13.3; strongly hygroscopic and absorbs CO₂ from air to form potassium carbonate; 1 kg of 90% flakes neutralises 0.58 kg of hydrochloric acid or 0.79 kg of sulphuric acid (100% basis).

Potassium hydroxide or caustic soda: which alkali to buy

PropertyPotassium hydroxide 90% (this product)Caustic soda 99%
Alkali equivalents per kg16.0 eq24.8 eq
CationPotassium: a plant nutrient, no sodium loadSodium: cheaper, but adds sodium to soil, effluent and food
Soap producedSoft or liquid soapHard bar soap
Solubility and freezingStays liquid at higher strength and lower temperature50% solution crystallises below 12 °C
Best suited toLiquid fertilisers, liquid soap, biodiesel, batteries, KCl muds, food where sodium is limitedBulk pH control, bar soap, cleaning; see caustic soda

How much potassium hydroxide do you need: worked examples

  • Liquid potassium fertiliser. A 10% K (12% K₂O) chloride-free solution needs 100 kg of K per 1,000 kg of product, which is 100 ÷ 0.627 = 160 kg of 90% KOH neutralised with an acid such as phosphoric or citric acid; a 5,000 L batch uses about 800 kg, 32 bags. Add flakes to water slowly and let the batch cool before adding acid.
  • Liquid soap. Saponification needs about 0.22 kg of 90% KOH per kg of tallow and 0.30 kg per kg of coconut oil (KOH SAP values are 1.4 times the NaOH values, adjusted for 90% purity). A 300 kg coconut-oil batch uses 90 kg.
  • Biodiesel catalyst. 1.0–1.5% of oil mass as KOH, plus the amount needed to neutralise free fatty acids. A 1,000 kg batch of used cooking oil at 1.2% plus 2 mg KOH/g FFA needs 12 kg + 2 kg = 14 kg of 90% flakes, dissolved in 200 L of methanol; see methanol.
  • Battery electrolyte and CO₂ scrubbing. Alkaline and nickel batteries use 25–35% KOH: 1,000 L of 30% w/w electrolyte (density 1.29) needs 387 kg of KOH, 430 kg of 90% flakes. As a CO₂ scrubber, 2 KOH + CO₂ → K₂CO₃ + H₂O: 1 kg of KOH absorbs 0.39 kg of CO₂.
  • Drilling fluid pH in KCl muds. 0.5–1.5 kg/m³ of KOH holds pH 9.5–10.5 without adding sodium that would reduce shale inhibition; a 100 m³ system at 1 kg/m³ uses 100 kg, four bags, alongside potassium chloride.

What Potassium Hydroxide is used for

  • Agriculture. Chloride-free potassium in liquid fertilisers, fertigation and foliar products, pH adjustment of humic and fulvic blends, with our agricultural range.
  • Soap, detergents and cleaning. Liquid and soft soaps, degreasers and oven cleaners, with our cleaning chemicals.
  • Energy. Biodiesel transesterification catalyst, alkaline battery and electrolyser electrolyte.
  • Oil and gas. pH control in KCl and potassium-based drilling fluids and in CO₂ removal.
  • Food and chemicals. Food additive E525, potassium salts, carbonate and phosphate manufacture, electroplating and dye production.

Handling and storage

Potassium hydroxide is highly corrosive and classified as dangerous goods for transport: UN 1813, Class 8, Packing Group II. It causes severe burns to skin and eyes and generates heat and spatter when dissolved: wear chemical goggles, face shield, gloves and protective clothing, keep an eyewash nearby, and always add flakes to water, never water to flakes. Store bags sealed, dry, off the ground and away from acids, aluminium, zinc and galvanised steel; it absorbs moisture and CO₂ rapidly and will cake. Always read the Safety Data Sheet before use.

Why buy Potassium Hydroxide from UD Trading

Every batch is released against our specification for KOH, carbonate, chloride, sulphate and iron under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses. Browse our general industrial chemicals and agricultural products, or contact our team for a quote. Related products: potassium carbonate, potassium sulphate. Chemical identity reference: CAS 1310-58-3 on CAS Common Chemistry.

Potassium Hydroxide FAQ

What grade is your potassium hydroxide?

Flakes at 90% KOH minimum, carbonate ≤ 1%, chloride ≤ 0.05%, iron ≤ 10 mg/kg, reported on the batch COA.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.

Is potassium hydroxide dangerous goods?

Yes. UN 1813, Class 8 corrosive, Packing Group II. We ship with the correct DG documentation and SDS.

How much potassium is in it?

About 62.7% K, or 75.5% K₂O equivalent, in the 90% flake grade; one 25 kg bag carries about 15.7 kg of potassium.

Can I use it instead of caustic soda?

Yes, where sodium is unwanted or potassium is wanted; you need about 1.55 kg of 90% KOH to replace 1 kg of 99% caustic soda on an equivalent basis.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to regional blenders and plants?

Yes. We deliver Australia-wide by DG-licensed road and rail freight, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Potassium Hydroxide (KOH)

Contact us for pricing, availability and documentation for Potassium Hydroxide (KOH). Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia