UD Trading Pty Ltd company logo

Potassium Carbonate

UD Trading supplies potassium carbonate (potash, K₂CO₃, CAS 584-08-7) at 99% minimum assay as a white granular powder to drilling fluid companies, liquid-fertiliser and fertigation blenders, glass and ceramic manufacturers, food and beverage processors, soap and detergent makers, gas-treatment plants and chemical manufacturers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Sydney, Melbourne, Perth, Adelaide, Darwin and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Potassium Carbonate at a glance

Chemical NamePotassium Carbonate
Chemical FormulaK2CO3
Other NamesPotash, Pearl Ash, Carbonate of Potash
CAS No584-08-7

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag with PE liner25 kg (40 per pallet)Drilling crews, food processors, soap makers, laboratories
Pallet of 25 kg bags, shrink-wrapped1,000 kgMud plants, fertiliser blenders, glass and ceramic plants
Bulk bag (FIBC)1,000 kgLarge plants
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Potassium Carbonate specification

Potassium carbonate is specified on assay, loss on drying, chloride, sulphate and iron. Low chloride and iron matter for glass, food and fertiliser use; low loss on drying means the bag has not taken up moisture.

ParameterSpecification
AppearanceWhite granular powder
Assay (K2CO3, dry)≥ 99.0 %
Loss on drying≤ 1.0 %
Chloride (Cl)≤ 0.02 %
Sulphate (SO4)≤ 0.02 %
Iron (Fe)≤ 20 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 138.21 g/mol; 68.2% K₂O equivalent and 56.6% potassium; solubility 112 g per 100 g water at 20 °C; a 1% solution has pH about 11.6; strongly hygroscopic and deliquescent, so bags must stay sealed; dissolving is exothermic (about 200 kJ per kg); 1 kg neutralises 0.71 kg of sulphuric acid or supplies 0.72 kg of alkalinity as CaCO₃; absorbs CO₂ from gas streams as K₂CO₃ + CO₂ + H₂O → 2 KHCO₃.

Potassium carbonate, potassium hydroxide or soda ash: which alkali to buy

PropertyPotassium carbonate (this product)Potassium hydroxide 90%Soda ash
pH of 1% solution11.613.311.4
CationPotassium, chloride-freePotassiumSodium
Dangerous goodsNoYes, Class 8No
HandlingMild irritant, hygroscopicCorrosive, heat on dissolvingIrritant dust
Best suited toKCl mud alkalinity, liquid K fertiliser, glass, food, CO₂ scrubbingStrong pH lift, liquid soap, biodiesel; see potassium hydroxideWater treatment, pools, sodium-tolerant uses; see soda ash

How much potassium carbonate do you need: worked examples

  • Alkalinity in a KCl polymer mud. 1–3 kg/m³ of potassium carbonate holds pH 9.5–10.5 and buffers against acid gases without adding sodium or calcium. A 100 m³ system at 2 kg/m³ takes 200 kg, eight bags, alongside potassium chloride and PAC-LV.
  • Liquid potassium fertiliser 0-0-30. 30% K₂O by weight needs 30 ÷ 0.682 = 44% w/w potassium carbonate. A 1,000 kg batch (about 700 L at 1.43 SG) uses 440 kg of carbonate in 560 kg of water; add slowly with stirring because the solution warms, and cool before adding acids or trace elements.
  • Neutralising acid. K₂CO₃ + H₂SO₄ → K₂SO₄ + CO₂ + H₂O: 138 g of carbonate per 98 g of acid, so 1 kg neutralises 0.71 kg of sulphuric acid or 0.53 kg of hydrochloric acid, releasing 0.32 kg of CO₂; vent the vessel.
  • CO₂ removal from gas. Hot potassium carbonate scrubbing absorbs 0.32 kg of CO₂ per kg of K₂CO₃ before regeneration; a 20–30% w/w circulating solution is typical, so a 50 m³ absorber inventory at 25% holds about 14 t of carbonate.
  • Glass batch. Specialty and optical glasses use 5–15% potassium carbonate in the batch for lower expansion and higher brilliance; a 2 t batch at 10% uses 200 kg, eight bags.

What Potassium Carbonate is used for

  • Drilling fluids. Alkalinity and pH buffer in potassium-based water-based muds and formate systems, and calcium treatment, alongside our drilling fluid chemicals.
  • Agriculture. Chloride-free potassium for liquid fertilisers, fertigation and foliar blends, with our agricultural range.
  • Glass and ceramics. Flux for crystal, optical and television glass, glazes and frits.
  • Food and beverage. Acidity regulator and leavening agent (E501), cocoa alkalisation and noodle manufacture.
  • Industrial and chemical. Soft soap and detergents, gas sweetening (Benfield process), potassium salts, dyes and pharmaceuticals.

Handling and storage

Potassium carbonate is not classified as dangerous goods for transport, but it is alkaline and irritates eyes and skin: wear eye protection, gloves and a dust mask when tipping bags. It is strongly hygroscopic: keep bags sealed, dry and off the ground, and reseal opened bags because the powder will turn to a paste in humid air. Always read the Safety Data Sheet before use.

Why buy Potassium Carbonate from UD Trading

Every batch is released against our specification for assay, loss on drying, chloride, sulphate and iron under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses. Browse our drilling fluid chemicals, agricultural products and general industrial chemicals, or contact our team for a quote. Related products: potassium sulphate, sodium bicarbonate. Chemical identity reference: CAS 584-08-7 on CAS Common Chemistry.

Potassium Carbonate FAQ

What grade is your potassium carbonate?

99% K₂CO₃ minimum, loss on drying ≤ 1%, chloride ≤ 0.02%, sulphate ≤ 0.02%, reported on the batch COA; suitable for technical, fertiliser and food use.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.

How much potassium does it contain?

About 56.6% K, or 68.2% K₂O equivalent; one 25 kg bag carries about 14 kg of potassium.

Is potassium carbonate dangerous goods?

No. It is not classified as dangerous goods for transport, but it is an alkaline irritant. Follow the SDS.

Why use it instead of potassium hydroxide?

It gives chloride-free potassium and alkalinity without the corrosive handling, DG classification and heat of caustic potash; choose KOH only when a very high pH is needed.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to drilling supply bases and regional blenders?

Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Potassium Carbonate

Contact us for pricing, availability and documentation for Potassium Carbonate. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia