UD Trading Pty Ltd company logo

Formic Acid 94%

UD Trading supplies formic acid 94% (methanoic acid, HCOOH, CAS 64-18-6), our highest-strength formic acid grade, in IBCs and drums to leather tanneries, textile dye houses, rubber processors, chemical manufacturers, oilfield service companies and industrial users across Australia who need the most acid per litre. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Roma, Darwin and regional centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system. An 85% grade is also available for silage, agriculture and general use.

Formic Acid 94% at a glance

Chemical NameFormic Acid 94% (aqueous solution)
Chemical FormulaHCOOH
Other NamesMethanoic Acid, Hydrogen Carboxylic Acid
CAS No64-18-6

Pack sizes and how to order

PackNet weightTypical buyer
20 L drumAbout 24 kgTrials, laboratories, workshops, small plants
200 L HDPE drumAbout 240 kgTanneries, dye houses, workshops, laboratories
1,000 L IBCAbout 1,215 kgChemical manufacturers, oilfield service companies, processors
Full container load (FCL)About 18–20 IBCsScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Formic Acid 94% specification

Our 94% grade is tested for assay, colour, chloride, sulphate and iron on every batch, the parameters that matter for leather, dye and synthesis work.

ParameterSpecification
AppearanceClear colourless liquid
Formic acid (HCOOH)≥ 94.0 %
Colour (APHA)≤ 10
Chloride (Cl)≤ 5 mg/kg
Sulphate (SO4)≤ 5 mg/kg
Iron (Fe)≤ 1.0 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 46.03 g/mol; density of the 94% solution about 1.215 g/mL at 20 °C, so one IBC holds about 1,215 kg containing 1,140 kg of HCOOH; boiling point about 107 °C; freezing point below 0 °C (pure formic acid freezes at 8.4 °C, the 85% grade at about −12 °C); flash point about 56 °C, which is why the 94% grade carries a flammable subsidiary risk; pKa 3.75, making it roughly ten times stronger than acetic acid; completely miscible with water; a reducing acid that slowly decomposes to carbon monoxide and water, so containers are vented.

Formic acid 94% or 85%: which grade to buy

PropertyFormic acid 94% (this product)Formic acid 85%
HCOOH per IBCAbout 1,140 kgAbout 1,015 kg
ADG classificationUN 1779, Class 8 with Class 3 flammable subsidiary risk, PG IIUN 3412, Class 8, PG II
Freezing pointBelow 0 °CAbout −12 °C
Water carried per tonne of acid64 kg176 kg
Best suited toChemical synthesis, formate production, leather and textile processes, oilfield blends where water content mattersSilage and feed preservation, general acidification, cleaning blends, sites avoiding flammable-class storage

How much formic acid do you need: worked examples

  • Making potassium formate. HCOOH + KOH → KHCOO + H₂O: 46 kg of formic acid and 56 kg of potassium hydroxide give 84 kg of potassium formate. One tonne of potassium formate needs 548 kg of HCOOH, which is 583 kg (480 L) of 94% acid, plus 667 kg of KOH. The reaction releases heat; add the acid to the alkali solution with cooling.
  • High-temperature well acidising. Formic acid is used at 9–10% w/w as a retarded alternative to hydrochloric acid above about 120 °C, often blended with HCl. To make 10 m³ of 9% formic acid (about 10,200 kg) you need 918 kg of HCOOH, which is 977 kg (about 805 L) of 94% acid added to roughly 9,200 L of water with corrosion inhibitor.
  • Leather deliming and dye fixing. Tanneries use 1–2% formic acid on pelt weight. A 5 t drum load at 1.5% needs 75 kg of HCOOH, 80 kg (66 L) of 94% acid, usually diluted 1:10 before it goes into the drum.
  • Textile dye bath pH control. Acid and reactive dye baths run at 1–2 g/L of formic acid to hold pH 3.5–4.5. A 10,000 L winch or jet bath takes 10–20 kg of HCOOH, 11–21 kg (9–17 L) of 94% acid.
  • Descaling. 2 HCOOH + CaCO₃ → Ca(HCOO)₂ + CO₂ + H₂O: 92 g of acid dissolves 100 g of carbonate scale, so 1 kg of 94% acid removes about 1.02 kg of scale. Removing 100 kg of scale needs 98 kg (81 L) of 94% acid diluted to a 5–10% working solution.

What Formic Acid 94% is used for

  • Chemical manufacture. Production of sodium and potassium formate, formate esters, pharmaceuticals and agrochemicals, and as a reducing agent and solvent.
  • Leather. Deliming, pickling, chrome-tan fixation and dye fixing in tanneries.
  • Textiles. pH control in wool, nylon and reactive dyeing, and neutralisation after alkaline scouring.
  • Oilfield. Retarded acidising of carbonate reservoirs at high temperature, iron-control and scale blends, and a feedstock for formate drilling and completion brines.
  • Rubber. Coagulation of natural rubber latex.
  • Cleaning and industry. Descaling and limescale removers, metal surface treatment, and pH adjustment in process water where a volatile, biodegradable acid is preferred to mineral acids.

Handling and storage

Formic acid 94% is dangerous goods: UN 1779, Class 8 corrosive with Class 3 flammable liquid subsidiary risk, Packing Group II. It causes severe skin burns and eye damage, its vapour irritates the respiratory tract, and it is flammable with a flash point near 56 °C. Wear a face shield, nitrile or butyl gloves and apron, work with good ventilation or a respirator with acid-gas filter, and keep eyewash and deluge facilities within reach. Store in the vented original container in a cool, bunded, well-ventilated area away from ignition sources, oxidisers, alkalis and metals; formic acid attacks mild steel, zinc and aluminium, so use HDPE, polypropylene or 316 stainless steel. Containers must stay vented because slow decomposition releases carbon monoxide and pressurises sealed vessels. Always read the Safety Data Sheet before use.

Why buy Formic Acid from UD Trading

Chloride or iron in formic acid stains leather and spoils dye shades. We release every lot against an approved specification for assay, colour, chloride, sulphate and iron under our ISO 9001:2015 quality system, ship with full DG documentation in vented UN-approved containers, and hold stock in multiple Australian warehouses. Browse our general industrial chemicals and drilling fluid chemicals, or contact our team for a quote. Chemical identity reference: CAS 64-18-6 on CAS Common Chemistry.

Formic Acid 94% FAQ

What is the difference between formic acid 94% and 85%?

The 94% grade carries about 12% more acid per IBC and less water, but it is classified as flammable as well as corrosive (UN 1779, Class 8 (3)). The 85% grade is Class 8 only and is the usual choice for silage and general use.

How is it packed?

In vented 200 L drums (about 240 kg) and vented 1,000 L IBCs (about 1,215 kg), with full container loads available for scheduled supply.

Is formic acid 94% dangerous goods?

Yes. UN 1779, Class 8 corrosive with Class 3 flammable subsidiary risk, Packing Group II. It ships with DG documentation and needs bunded, ventilated storage away from ignition sources.

Why are the containers vented?

Formic acid slowly decomposes to carbon monoxide and water. A sealed container would pressurise, so drums and IBCs have vented closures and should be stored upright out of the sun.

Can formic acid replace hydrochloric acid in well acidising?

Yes, at high temperatures. A 9–10% formic acid reacts more slowly with carbonate than 15% HCl, giving deeper penetration and lower corrosion rates above about 120 °C; it is often blended with HCl.

What materials are compatible with formic acid?

HDPE, polypropylene, PTFE and 316 stainless steel. Avoid mild steel, zinc, aluminium and natural rubber.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled drum, IBC and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Formic Acid 94%

Contact us for pricing, availability and documentation for Formic Acid 94%. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia