Potassium Formate
UD Trading supplies potassium formate 75% liquid (HCOOK, CAS 590-29-4) at 1.56–1.58 SG in IBCs and bulk to drilling fluid and well-service companies, operators drilling high-pressure, high-temperature and reservoir sections, gas producers, airports for runway de-icing and industrial users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Dampier, Darwin and regional supply bases, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Potassium Formate at a glance
| Chemical Name | Potassium Formate |
|---|---|
| Chemical Formula | CHKO2 |
| Other Names | Formic Acid Potassium Salt |
| CAS No | 590-29-4 |
Pack sizes and how to order
| Pack | Net quantity | Typical buyer |
|---|---|---|
| 20 L drum | About 31 kg | Trials, laboratories, workshops, small plants |
| 200 L drum | About 314 kg | Workshops, small and medium users |
| IBC | 1,000 L (about 1,570 kg) | Well-service crews, pill and sweep make-up, airports |
| Scheduled contract supply | Program volumes | Operators with multi-well campaigns; brine buy-back by arrangement |
Pricing is quoted per order, delivered, usually within one business day of your enquiry; IBCs are supplied on a deposit or exchange basis. Contract pricing is available for scheduled volumes and campaign programs. Lead time depends on quantity: IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Potassium Formate specification
Potassium formate brine is specified on formate content, density, pH and chloride. Density sets the fluid weight; pH 9–11 with carbonate/bicarbonate buffering protects polymers and tubulars; low chloride keeps the brine non-corrosive and non-damaging.
| Parameter | Specification |
|---|---|
| Appearance | Colourless to pale liquid |
| Potassium formate | ≥ 75 % |
| Density (20 °C) | 1.56 – 1.58 g/mL |
| pH | 9 – 11 |
| Chloride | ≤ 0.1 % |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass of HCOOK 84.12 g/mol; the 75% w/w solution has a density of 1.57 SG (13.1 lb/gal) and a crystallisation temperature below −50 °C; it dilutes with fresh water to any density from 1.00 to 1.57 SG with no solids; viscosity about 10 mPa·s at 20 °C; readily biodegradable and low in toxicity; monovalent, so it is compatible with reservoir formation waters and does not precipitate with sulphate or carbonate; stabilises xanthan, PAC and starch to 180 °C and above.
Potassium formate, calcium bromide or caesium formate: which high-density brine
| Property | Potassium formate 75% (this product) | Calcium bromide 52% | Caesium formate |
|---|---|---|---|
| Maximum density | 1.57 SG | 1.70 SG (to 1.80 blended with ZnBr₂) | 2.20 SG |
| Valency and compatibility | Monovalent; compatible with formation water and polymers | Divalent; precipitates with carbonate and sulphate, breaks many polymers | Monovalent |
| Corrosion and HSE | Low corrosion, biodegradable, low toxicity | Corrosive, higher toxicity, bromide discharge limits | Low corrosion |
| Cost | Moderate | Moderate | Very high, rented |
| See also | calcium bromide | On request |
How much potassium formate do you need: worked examples
- Blending a 1.30 SG completion brine. A 1.30 SG potassium formate brine is about 44% w/w. For 10 m³: brine mass 13,000 kg; formate 0.44 × 13,000 = 5,720 kg, which is 5,720 ÷ 0.75 = 7,630 kg (4,860 L) of 75% product plus 5,370 L of fresh water. Always add product to water and confirm density with a pressurised mud balance.
- Blending to 1.45 SG. About 63% w/w: for 10 m³ (14,500 kg) use 9,135 kg of formate, 12,180 kg (7,760 L) of 75% product plus 2,320 L of water. Above 1.50 SG the brine is used almost neat.
- Reservoir drill-in fluid. 1.20–1.40 SG formate brine with 3–5 kg/m³ xanthan gum, 15–25 kg/m³ modified starch or PAC-LV, 30–60 kg/m³ sized calcium carbonate; a 60 m³ system at 1.30 SG needs about 46 t of 75% product, roughly 29 IBCs or two tankers.
- Topping up density after dilution. To lift 50 m³ of 1.25 SG brine to 1.30 SG, add 75% product (1.57 SG) at roughly V = 50 × (1.30 − 1.25) ÷ (1.57 − 1.30) = 9.3 m³; check with a density table, because formate brines are not exactly linear.
- Runway de-icing. Diluted to 50%, potassium formate liquid is applied at 20–40 g/m² for anti-icing; a 135,000 m² runway at 30 g/m² takes about 3 kL of 50% solution per application.
What Potassium Formate is used for
- Completion and workover brines. Solids-free, non-damaging fluids from 1.00 to 1.57 SG for perforating, gravel packing and well control, alongside our drilling and completion chemicals.
- Reservoir drill-in and HPHT drilling. Low ECD, high polymer stability, excellent shale inhibition and lubricity in high-angle and high-temperature wells.
- Gas wells and hydrate control. Low-solids kill fluids and packer fluids with hydrate inhibition.
- De-icing. Liquid runway and taxiway de-icer with low corrosion and low biochemical oxygen demand.
- Industrial. Heat-transfer and secondary refrigerant fluids, leather and textile processing.
Handling and storage
Potassium formate brine is not classified as dangerous goods for transport, but it is alkaline (pH 9–11) and can irritate eyes and skin: wear goggles and gloves, and rinse spills with water. Keep IBCs closed to stop evaporation raising the density; store above 0 °C away from acids and oxidisers; brines are slippery when spilled. Always read the Safety Data Sheet before use.
Why buy Potassium Formate from UD Trading
Every batch is released against our specification for formate content, density, pH and chloride under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses close to the main drilling supply bases, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals, or contact our team for a quote. Related products: sodium formate, potassium chloride, sodium bromide. Chemical identity reference: CAS 590-29-4 on CAS Common Chemistry.
Potassium Formate FAQ
What strength is your potassium formate?
75% w/w liquid at 1.56–1.58 SG, pH 9–11, chloride ≤ 0.1%, reported on the batch COA.
What pack sizes do you supply?
1,000 L IBCs and drums, with campaign contract supply and brine buy-back by arrangement.
How do I blend it to a target density?
Dilute the 75% product with fresh water using a formate density table; roughly, 1.30 SG needs 49% of the brine volume as 75% product. We supply a blending table with every order.
Is potassium formate dangerous goods?
No. It is not classified as dangerous goods for transport and is readily biodegradable.
Why choose formate over bromide brines?
Formate brines are monovalent, non-corrosive, polymer-friendly and biodegradable, with no carbonate or sulphate precipitation in the reservoir. Bromides are needed only above about 1.57 SG.
What is the lead time?
IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days.
Do you deliver to drilling supply bases?
Yes. We deliver Australia-wide by road and rail freight, including Roma, Moomba, Dampier and Darwin, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled IBC and bulk volumes and multi-well programs.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Potassium Formate
Contact us for pricing, availability and documentation for Potassium Formate. Call 07 3040 7298 or email sales@udtrading.com.au.

