UD Trading Pty Ltd company logo

Sodium Bromide

UD Trading supplies sodium bromide (NaBr, CAS 7647-15-6) as 98.5% crystals in 25 kg bags and as a 45% solution in IBCs to drilling fluid and well-service companies, cooling-tower and industrial water-treatment contractors, pool and spa suppliers, photographic, pharmaceutical and chemical manufacturers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Dampier, Darwin, Sydney, Melbourne, Adelaide and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Sodium Bromide at a glance

Chemical NameSodium Bromide
Chemical FormulaNaBr
Other NamesBromide Salt
CAS No7647-15-6

Pack sizes and how to order

PackNet quantityTypical buyer
25 kg bag, crystals25 kg (40 per pallet)Spa and pool suppliers, water-treatment contractors, laboratories
Pallet of 25 kg bags1,000 kgMud plants, distributors, chemical blenders
IBC, 45% solution1,000 L (about 1,500 kg)Well-service crews, cooling-tower dosing, brine plants

Pricing is quoted per order, delivered, usually within one business day of your enquiry; IBCs are supplied on a deposit or exchange basis. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Sodium Bromide specification

Sodium bromide is specified on NaBr content, chloride, moisture and heavy metals. Low chloride keeps brine density and crystallisation temperature predictable; low heavy metals matter for water-treatment and pharmaceutical use.

ParameterSpecification
AppearanceWhite crystals or clear solution
Sodium bromide (NaBr, dry)≥ 98.5 %
Chloride (as NaCl)≤ 1.0 %
Moisture (solid)≤ 1.0 %
Heavy metals (as Pb)≤ 10 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 102.89 g/mol; bromide content 77.7%; solubility about 91 g per 100 g water at 20 °C; a 45% w/w solution has a density of 1.50 SG (12.5 lb/gal), the practical maximum for a sodium bromide brine; a 30% solution is 1.28 SG; neutral pH in solution; hygroscopic crystals; monovalent, so compatible with formation waters and most polymers; low corrosion compared with calcium brines.

Sodium bromide, calcium bromide or calcium chloride: which brine to buy

PropertySodium bromide (this product)Calcium bromide 52%Calcium chloride
Maximum density1.50 SG1.70 SG1.39 SG
ValencyMonovalent: compatible with carbonate and sulphate waters and polymersDivalent: scale and polymer incompatibilityDivalent
CorrosionLowModerate to highModerate
Cost per unit densityModerateModerateLowest
Best suited to1.20–1.50 SG non-damaging completion fluids, bromine-based biocides1.40–1.70 SG; see calcium bromideUp to 1.39 SG; see calcium chloride

How much sodium bromide do you need: worked examples

  • Completion brine at 1.30 SG from crystals. A 1.30 SG sodium bromide brine is about 32% w/w. For 10 m³: brine mass 13,000 kg; NaBr 0.32 × 13,000 = 4,160 kg, which is 4,220 kg of 98.5% crystals (169 bags) dissolved in about 8,800 L of water. Add xanthan gum at 3–5 kg/m³ for sweeps and pills.
  • Same brine from 45% solution. Volume fractions are close to linear: (1.30 − 1.00) ÷ (1.50 − 1.00) = 60% of the final volume is 45% solution, so 10 m³ needs about 6,000 L of solution (six IBCs) and 4,000 L of fresh water.
  • Cooling-tower bromine biocide. Sodium bromide is activated by sodium hypochlorite: NaBr + NaOCl → NaOBr + NaCl, 103 g of NaBr per 74.4 g of NaOCl. Each 1 kg of NaBr needs 0.72 kg of NaOCl, about 5.5 L of 12.5% hypo, for full activation and yields 0.78 kg of bromine (as Br₂) equivalent. To establish 1 mg/L as Br₂ in a 500 m³ tower system takes 0.65 kg of NaBr plus 3.6 L of hypo, then top up to match blowdown and demand; many sites simply run 1–1.5 parts bromide solution per part hypo by volume.
  • Spa and pool bromine start-up. Establish a bromide bank of 30 mg/L: 30 g of sodium bromide per 1,000 L, so a 2,000 L spa takes 60 g and a 50,000 L pool 1.5 kg, then activate with hypochlorite or an oxidiser.
  • Blending a two-salt NaBr/NaCl brine at 1.25 SG. Cheaper than straight bromide: blend 1.50 SG sodium bromide solution with 1.20 SG saturated sodium chloride brine; fraction of bromide solution ≈ (1.25 − 1.20) ÷ (1.50 − 1.20) = 17%, so 20 m³ needs about 3.4 m³ of bromide solution and 16.6 m³ of salt brine.

What Sodium Bromide is used for

  • Completion and workover fluids. Solids-free monovalent brines from 1.05 to 1.50 SG for perforating, gravel packing and fluid-loss pills, alongside our drilling and completion chemicals.
  • Water treatment. Bromine-based biocide precursor for cooling towers, pulp mills and industrial water where ammonia or high pH reduces chlorine efficiency.
  • Pools and spas. Bromide bank for bromine-sanitised spas and indoor pools.
  • Chemical and pharmaceutical. Bromination reagent, sedatives and photographic emulsions.
  • Industrial. Flame retardants, oil and gas mercury control and density fluids for mineral separation.

Handling and storage

Sodium bromide is not classified as dangerous goods for transport and is of low acute toxicity, but it irritates eyes and prolonged exposure to bromide is harmful: wear goggles and gloves and avoid dust. Crystals are hygroscopic, so keep bags sealed, dry and off the ground; keep solutions closed to prevent evaporation and store away from strong acids and oxidisers, which release bromine. Always read the Safety Data Sheet before use.

Why buy Sodium Bromide from UD Trading

Every batch is released against our specification for NaBr, chloride, moisture and heavy metals under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and water treatment chemicals, or contact our team for a quote. Chemical identity reference: CAS 7647-15-6 on CAS Common Chemistry.

Sodium Bromide FAQ

What grade is your sodium bromide?

Crystals at 98.5% NaBr minimum, chloride ≤ 1% as NaCl, heavy metals ≤ 10 mg/kg, and a 45% solution at 1.50 SG, both reported on the batch COA.

What pack sizes do you supply?

25 kg bags and 1,000 kg pallets of crystals; 1,000 L IBCs and 200 L drums of 45% solution.

How dense can a sodium bromide brine go?

About 1.50 SG at 45% w/w. For higher densities blend with or switch to calcium bromide.

Is sodium bromide dangerous goods?

No. It is not classified as dangerous goods for transport. Keep it away from acids and oxidisers, which release bromine.

Can I use it for a bromine spa?

Yes. Establish 30 mg/L bromide (30 g per 1,000 L) and activate with an oxidiser; top up after draining.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to drilling supply bases?

Yes. We deliver Australia-wide by road and rail freight, including Roma, Moomba, Dampier and Darwin, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet, IBC and bulk volumes.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Sodium Bromide

Contact us for pricing, availability and documentation for Sodium Bromide. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia