Barite (Barium Sulphate)
UD Trading supplies API 13A drilling-grade barite (barium sulphate, BaSO₄, CAS 7727-43-7) to drilling fluid companies, mud engineers, drilling contractors, mineral explorers and industrial users across Australia. Our standard grade has a specific gravity of 4.20 or higher, with a 4.10 SG grade available on request. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Port Hedland, Dampier, Darwin and regional drilling centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system.
Barite at a glance
| Chemical Name | Barium Sulfate |
|---|---|
| Other Names | Barite, Barytes, API Grade Barite, Drilling-grade barium sulphate |
| CAS No | 7727-43-7 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| Bulk bag (FIBC, jumbo bag) | 1,000 kg | Rig sites, mud plants, liquid mud facilities |
| 25 kg bags on pallets | 25 kg (40 per pallet) | Mineral exploration, water bores, HDD, small jobs |
| Full container load (FCL) | 20–24 t | Scheduled contract supply to mud plants |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Barite specification
Our barite is tested against the API 13A Section 7 parameters that matter to mud engineers: density, soluble alkaline earth metals and particle size distribution.
| Parameter | Specification |
|---|---|
| Appearance | Off-white to grey powder |
| Specific gravity | ≥ 4.20 (pycnometer) |
| Water-soluble alkaline earth metals (as Ca) | ≤ 250 mg/kg |
| Residue > 75 μm (wet sieve) | ≤ 3.0 % |
| Particles < 6 μm (sedimentation) | ≤ 30 % |
| Soluble supernatant metals | Hg ≤ 1 mg/kg; Cd ≤ 3 mg/kg |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 233.39 g/mol; specific gravity of pure mineral 4.48 (drilling grades 4.10–4.30 because of associated minerals); Mohs hardness 3–3.5; practically insoluble in water (about 2.4 mg/L); melting point about 1,580 °C; chemically inert to acids and alkalis at drilling temperatures.
4.20 SG or 4.10 SG: which grade to specify
| Property | API 13A 4.20 SG (standard) | API 13A 4.10 SG |
|---|---|---|
| Minimum density | 4.20 g/cm³ | 4.10 g/cm³ |
| Soluble alkaline earth metals (as Ca) | ≤ 250 mg/kg | ≤ 250 mg/kg |
| Residue > 75 µm | ≤ 3.0% w/w | ≤ 3.0% w/w |
| Particles < 6 µm | ≤ 30% w/w | ≤ 30% w/w |
| Barite needed per unit of mud-weight increase | Baseline | About 1–3% more by mass, and higher solids loading |
| Best suited to | Oil and gas wells, high mud weights, kill fluids | Mineral exploration, water bores, HDD, cost-sensitive jobs at moderate mud weights |
At high mud weights the extra solids from a 4.10 grade raise plastic viscosity and equivalent circulating density, so 4.20 SG remains the default for oil and gas drilling. For shallow exploration and civil drilling at 1,100–1,300 kg/m³ the 4.10 grade performs well.
How much barite do you need: worked examples
To raise the density of a mud from ρ₁ to ρ₂ (kg/m³) using barite of density ρ_b = 4,200 kg/m³, the mass of barite per cubic metre of starting mud is m = ρ_b (ρ₂ − ρ₁) ÷ (ρ_b − ρ₂). In US field units the same relation is sacks of barite per barrel = 1,470 (W₂ − W₁) ÷ (35 − W₂) ÷ 100, with mud weights in lb/gal.
- Weighting up a water-based mud from 1,200 to 1,440 kg/m³ (10.0 to 12.0 lb/gal). m = 4,200 × 240 ÷ 2,760 = 365 kg per m³ of starting mud. For a 120 m³ active system that is 43.8 t, or 44 bulk bags. Each tonne of barite adds 0.238 m³ to system volume, so expect about 10 m³ of volume increase.
- Kill mud from 1,320 to 1,680 kg/m³ (11.0 to 14.0 lb/gal). m = 4,200 × 360 ÷ 2,520 = 600 kg per m³. A 60 m³ kill-mud pit needs 36 t of barite.
- Exploration mud from 1,050 to 1,150 kg/m³ with 4.10 SG barite. m = 4,100 × 100 ÷ 2,950 = 139 kg per m³; a 20 m³ system needs 2.8 t, about 111 × 25 kg bags.
- Hydrostatic pressure check. Bottom-hole pressure = ρ × g × TVD. A 1,440 kg/m³ mud at 2,500 m true vertical depth gives 1,440 × 9.81 × 2,500 = 35.3 MPa (5,120 psi). Raising mud weight by 100 kg/m³ adds 2.45 MPa at that depth.
What Barite is used for
- Weighting water-based and oil-based drilling fluids. Barite raises mud weight so the hydrostatic column balances formation pressure and keeps the well under control. Used alongside bentonite, xanthan gum and PAC-LV.
- Kill fluids and well control. High-density barite slurries are used to kill wells and manage kicks during drilling and workover, often in combination with potassium chloride or calcium chloride brines.
- Borehole stability. Correct mud density prevents caving and sloughing of weak formations in mineral exploration, water bore and oil and gas drilling.
- Industrial filler. A dense, inert, bright filler in paints, powder coatings, plastics, rubber and brake linings.
- Radiation shielding. Barite aggregate produces heavyweight concrete of about 3,500 kg/m³ for medical and industrial X-ray rooms.
Handling and storage
Barite is not classified as dangerous goods for transport under the ADG Code. It is a fine powder, so control dust, use a P2 dust mask in poorly ventilated areas and store bags dry and off the ground to prevent caking. Bulk bags should be lifted by all four loops. Always read the Safety Data Sheet before use.
Why buy Barite from UD Trading
Barite is a commodity until a batch fails density or grit tests on site. We release every lot against an approved specification under an ISO 9001:2015 quality system, hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and mining chemicals, or contact our team for a quote. Chemical identity reference: CAS 7727-43-7 on CAS Common Chemistry.
Barite FAQ
What specific gravity is your barite?
Our standard grade requires a specific gravity of 4.20 or higher, measured by pycnometer and reported on the batch COA. An API 13A 4.10 SG grade, with the same limits apart from density, is available on request.
How is the barite packed?
In 1,000 kg bulk bags or 25 kg bags on pallets (40 bags per pallet). Full container loads can be scheduled for mud plants.
How much barite do I need to raise mud weight?
Use m = 4,200 × (ρ₂ − ρ₁) ÷ (4,200 − ρ₂) kg per cubic metre of mud. Raising 1,200 kg/m³ mud to 1,440 kg/m³ takes 365 kg of 4.20 SG barite per cubic metre.
Is barite classed as dangerous goods?
No. Barite is not classified as dangerous goods for transport. Refer to the SDS for dust-control guidance.
Do you deliver to Port Hedland, Dampier, Darwin and Roma?
Yes. We deliver Australia-wide by road and rail freight to ports, rig sites and mud plants, with freight quoted per consignment.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Can you supply a COA with API 13A test results before I order?
Yes. We send the current batch COA, including density, soluble alkaline earths and particle size results, with the quote.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled bulk-bag and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Barium Sulfate
Contact us for pricing, availability and documentation for Barium Sulfate. Call 07 3040 7298 or email sales@udtrading.com.au.

