Hydrated Lime
UD Trading supplies hydrated lime (calcium hydroxide, Ca(OH)₂, CAS 1305-62-0) with at least 90% Ca(OH)₂ and 68% available lime as CaO to water and wastewater utilities, mines and mineral processors, civil and road contractors, sugar mills, poultry and agricultural users and industrial plants across Australia. It is a white fine powder dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Kalgoorlie, Mackay, Gladstone and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Hydrated Lime at a glance
| Chemical Name | Calcium Hydroxide |
|---|---|
| Chemical Formula | Ca(OH)₂ |
| Other Names | Slaked Lime, Calcium Hydrate, Hydrated Lime |
| CAS No | 1305-62-0 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag | 25 kg (40 per pallet) | Councils, contractors, small plants, farms |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Water plants, civil contractors, distributors |
| Bulk bag (FIBC) | 1,000 kg | Mines, large utilities, soil stabilisation programs |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled monthly tonnages. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Hydrated Lime specification
Hydrated lime is specified on calcium hydroxide content, available lime as CaO, carbonate (CO₂) content and fineness. Available lime is the number that sets your dose; fineness sets how fast it reacts and how well it stays in suspension as milk of lime.
| Parameter | Specification |
|---|---|
| Appearance | White fine powder |
| Calcium hydroxide (Ca(OH)2) | ≥ 90 % |
| Available lime (as CaO) | ≥ 68 % |
| CO2 | ≤ 3.0 % |
| Residue on 90 μm sieve | ≤ 2.0 % |
| Moisture | ≤ 1.0 % |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 74.09 g/mol; bulk density 400–600 kg/m³ (poured) to 700 kg/m³ (packed); solubility only 1.7 g/L at 20 °C, so it is dosed as a slurry (milk of lime, 5–20% w/w); a saturated solution has pH 12.4; 1 kg of Ca(OH)₂ contains 0.757 kg of CaO; it reacts with CO₂ in air to form calcium carbonate, which is why the CO₂ limit matters and why bags must stay sealed.
Hydrated lime or quicklime: which one to buy
| Property | Hydrated lime Ca(OH)₂ (this product) | Quicklime CaO |
|---|---|---|
| Available CaO | ≥ 68% | 90–95% |
| Reaction with water | None; mixes to a slurry safely | Violent, releases 1,160 kJ/kg; needs a slaker |
| Handling and storage | Bags or bulk bags, 12-month shelf life sealed | Bulk silos; degrades in humid air within weeks |
| Lime per tonne of neutralising power | Baseline | About 25% less mass to freight |
| Best suited to | Sites without a slaker: water plants, mines under 5 t/day, civil works, farms | Large plants with slaking equipment |
How much hydrated lime do you need: worked examples
- Neutralising acid mine drainage or an acid stream. Ca(OH)₂ + H₂SO₄ → CaSO₄ + 2 H₂O. 74 g of calcium hydroxide neutralises 98 g of sulphuric acid, so 1 kg of 90% hydrated lime neutralises 1.19 kg of 100% sulphuric acid, or 0.67 kg of acidity expressed as CaCO₃. A 2 ML/day flow with 300 mg/L acidity (600 kg/day as CaCO₃) needs about 900 kg/day of 90% lime, or close to 1 t a day with 10% excess, roughly one bulk bag a day.
- Lime softening. Carbonate hardness is removed as Ca(HCO₃)₂ + Ca(OH)₂ → 2 CaCO₃ + 2 H₂O: 0.74 kg of pure Ca(OH)₂ per kg of carbonate hardness (as CaCO₃), plus 1.68 kg per kg of free CO₂. Water at 150 mg/L carbonate hardness and 10 mg/L CO₂ at 5 ML/day needs 5,000 × (150 × 0.74 + 10 × 1.68) ÷ 1,000 ÷ 0.90 ≈ 710 kg/day. Pair with soda ash for non-carbonate hardness.
- Soil stabilisation. Typical 2–6% lime by dry mass of soil, set by pH and plasticity tests. For a 200 mm layer of clay at 1,800 kg/m³ dry density and 4% lime: 0.2 × 1,800 × 0.04 = 14.4 kg/m². A 1,000 m² haul-road or pad needs 14.4 t, or 15 bulk bags.
- Milk of lime make-up. A 10% w/w slurry needs 100 kg of lime per 900 L of water (1,000 kg of slurry, about 940 L). A 5,000 L slurry tank takes 530 kg per batch.
- pH lift in gold leaching. Cyanidation circuits hold pH 10.5–11; lime consumption is typically 1–3 kg per tonne of ore. A 2,000 t/day mill at 1.5 kg/t uses 3 t/day.
What Hydrated Lime is used for
- Water and wastewater treatment. pH correction, softening, phosphorus removal, sludge conditioning and stabilisation, alongside PAC and alum.
- Mining and mineral processing. pH control in cyanide leach, flotation and tailings; acid mine drainage neutralisation; metal precipitation.
- Civil and roads. Lime stabilisation of clay subgrades, drying wet ground, lime-treated pavements and brick mortar.
- Agriculture and food. Sugar juice clarification, poultry shed sanitising, pH correction in effluent ponds and aquaculture.
- Industrial. Flue-gas desulphurisation, chemical manufacture, leather and glass.
Handling and storage
Hydrated lime is strongly alkaline and can cause serious eye damage and skin irritation: wear sealed eye protection, gloves and a P2 dust mask, and avoid dust. It is not classified as dangerous goods for transport under the ADG Code. Keep bags sealed, dry and off the ground; exposure to air converts it to carbonate and lowers available lime. Always read the Safety Data Sheet before use.
Why buy Hydrated Lime from UD Trading
Every batch is released against our specification for Ca(OH)₂, available CaO, CO₂ and fineness under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses so dosing plants and stabilisation crews are not left waiting. Browse our water treatment chemicals and mining chemicals, or contact our team for a quote. Related products: caustic soda, magnesium oxide, calcium carbonate. Chemical identity reference: CAS 1305-62-0 on CAS Common Chemistry.
Hydrated Lime FAQ
What grade is your hydrated lime?
At least 90% calcium hydroxide and 68% available lime as CaO, with CO₂ ≤ 3%, reported on the batch COA.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags, 1,000 kg bulk bags and full container loads.
How much lime neutralises my acid?
1 kg of 90% hydrated lime neutralises about 1.19 kg of sulphuric acid or 0.67 kg of acidity as CaCO₃. Send us your flow and acidity and we will size the daily dose.
Is hydrated lime dangerous goods?
No. It is not classified as dangerous goods for transport, but it is corrosive to eyes and irritating to skin and lungs. Follow the SDS.
Hydrated lime or quicklime for my site?
Hydrated lime if you have no slaker and use under about 5 t a day; quicklime only where slaking equipment and silo storage exist.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to mine sites?
Yes. We deliver Australia-wide by road and rail freight, including Kalgoorlie, Port Hedland, Mount Isa and Darwin, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled monthly tonnages.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Hydrated Lime
Contact us for pricing, availability and documentation for Hydrated Lime. Call 07 3040 7298 or email sales@udtrading.com.au.

