Calcium Chloride
UD Trading supplies calcium chloride (CaCl₂, CAS 10043-52-4) at 94–97% purity as white flakes, prills or powder to drilling contractors, mines, road authorities, councils, civil contractors and industrial users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Port Hedland, Dampier, Roma and regional centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system.
Calcium Chloride at a glance
| Chemical Name | Calcium Chloride |
|---|---|
| Chemical Formula | CaCl₂ |
| Other Names | Calcium Dichloride |
| CAS No | 10043-52-4 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg moisture-barrier bag | 25 kg (40 per pallet) | Councils, contractors, workshops, small brine batches |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Mines, drilling contractors, distributors |
| Jumbo bag (FIBC) | 1,000 kg | Dust-suppression programs, brine plants |
| Full container load (FCL) | 20–24 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Calcium Chloride specification
Our calcium chloride is the high-strength 94–97% anhydrous grade, which gives more CaCl₂ per tonne than 74–77% dihydrate.
| Parameter | Specification |
|---|---|
| Appearance | White flakes / prills / powder |
| Calcium chloride (CaCl2) | 94.0 – 97.0 % |
| Total alkali chlorides (as NaCl) | ≤ 5.0 % |
| Magnesium (as MgCl2) | ≤ 0.5 % |
| pH (10% solution) | 8.0 – 10.5 |
| Water-insoluble matter | ≤ 0.15 % |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 110.98 g/mol (anhydrous); density 2.15 g/cm³; melting point 772 °C; solubility 74.5 g per 100 g water at 20 °C and 159 g at 100 °C; strongly deliquescent, absorbing moisture from air above about 30% relative humidity; heat of solution −81 kJ/mol (about 730 kJ per kg), so it warms water as it dissolves.
Anhydrous 94–97% or dihydrate 74–77%: which grade to buy
| Property | Anhydrous 94–97% (this product) | Dihydrate 74–77% |
|---|---|---|
| CaCl₂ per tonne of product | about 950 kg | about 755 kg |
| Product needed for 1 t of CaCl₂ | 1.05 t | 1.32 t |
| Freight and handling per tonne of CaCl₂ | Baseline | About 26% more |
| Heat released on dissolving | Higher: add to water slowly | Lower |
| Best suited to | Brines, dust control, de-icing, drying, long-haul freight | Small batches where gentle dissolving matters |
How much calcium chloride do you need: worked examples
- Completion brine, 10 m³ at 1.20 SG. A 1.20 SG CaCl₂ brine is about 22% w/w CaCl₂ at 20 °C. Brine mass = 10 m³ × 1,200 kg/m³ = 12,000 kg; CaCl₂ required = 0.22 × 12,000 = 2,640 kg; with 95% product that is 2,640 ÷ 0.95 = 2,780 kg, or 111 × 25 kg bags, dissolved in about 9,200 L of water. For 1.30 SG use about 30% w/w; the practical maximum for a CaCl₂-only brine is about 1.39 SG at 40% w/w. Higher densities need calcium bromide.
- Heat on mixing. Dissolving 1 kg of anhydrous CaCl₂ in 10 L of water releases about 730 kJ, enough to raise the 11 kg mixture by 730 ÷ (11 × 4.18) ≈ 16 °C. Add product to water, never water to product, and mix in stages for large batches.
- Haul-road dust suppression. Initial treatment 0.5–1.0 kg of flake per m² (or 1–2 L/m² of a 30–35% solution), followed by lighter top-ups. A 5 km haul road 12 m wide (60,000 m²) at 0.75 kg/m² needs 45 t, or 45 jumbo bags.
- Freezing-point depression. A 20% w/w solution freezes at about −18 °C, 25% at about −29 °C and 30% near −46 °C; the eutectic is −51 °C at 29.8%. For de-icing, 1 kg of CaCl₂ flake melts roughly 3–4 times as much ice as 1 kg of rock salt at −10 °C.
What Calcium Chloride is used for
- Drilling and completion brines. CaCl₂ brines reach densities around 1.39 SG and are used in completion, workover and the water phase of oil-based muds, often with potassium chloride and sodium bromide.
- Dust control. Spread on haul roads, laydown yards and unsealed surfaces, it draws moisture from the air to keep dust down and binds fines.
- De-icing and freeze protection. Works at lower temperatures than common salt and releases heat as it dissolves.
- Drying and desiccant use. Used to dry gases and solvents and as a moisture absorber in shipping containers and storage.
- Concrete and civil. A set accelerator in unreinforced concrete and mortar at up to 2% by cement mass; not for reinforced or prestressed concrete because chloride promotes corrosion.
- Water treatment and industry. Hardness adjustment in pools and process water, wastewater phosphate removal, brine for refrigeration systems.
Handling and storage
Calcium chloride is not classified as dangerous goods for transport under the ADG Code, but it is an eye irritant and warms strongly on dissolving: add it to water slowly, wear gloves and eye protection. It is strongly hygroscopic, so keep bags sealed, stored dry and off the ground; opened bags should be used the same day. Always read the Safety Data Sheet before use.
Why buy Calcium Chloride from UD Trading
Every batch is released against an approved specification for CaCl₂ content, alkali chlorides and magnesium under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses so haul-road programs and brine jobs are not waiting on a ship. Browse our drilling fluid chemicals, mining chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 10043-52-4 on CAS Common Chemistry.
Calcium Chloride FAQ
What grade is your calcium chloride?
Anhydrous 94–97% CaCl₂, supplied as flakes, prills or powder depending on availability. It carries about 26% more CaCl₂ per tonne than the 74–77% dihydrate grade.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags, jumbo bags and full container loads.
How much calcium chloride makes a 1.20 SG brine?
About 22% w/w, which is 2,780 kg of 95% product per 10 m³ of brine. We can supply a mixing table for 1.05 to 1.39 SG with the quote.
Is calcium chloride dangerous goods?
No, it is not classified as dangerous goods for transport, but it is an eye irritant and generates heat when dissolved. Follow the SDS.
Can it be used for dust suppression on mine haul roads?
Yes. Apply 0.5–1.0 kg of flake per m² for the initial treatment, or spray a 30–35% solution, and top up as the surface dries.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to Port Hedland, Darwin and remote sites?
Yes. We deliver Australia-wide by road and rail freight, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet, jumbo-bag and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Calcium Chloride
Contact us for pricing, availability and documentation for Calcium Chloride. Call 07 3040 7298 or email sales@udtrading.com.au.

