UD Trading Pty Ltd company logo

Calcium Bromide

UD Trading supplies calcium bromide 52% brine (CaBr₂, CAS 7789-41-5) at 1.68–1.72 SG in IBCs and bulk to drilling fluid and well-service companies, operators running high-density completion, packer and workover fluids, and industrial users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Dampier, Darwin and regional supply bases, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Calcium Bromide at a glance

Chemical NameCalcium Bromide
Chemical FormulaCaBr2
Other NamesCalcium Dibromide
CAS No7789-41-5

Pack sizes and how to order

PackNet quantityTypical buyer
20 L drumAbout 34 kgTrials, laboratories, workshops, small plants
200 L drumAbout 340 kgWorkshops, small and medium users
IBC1,000 L (about 1,700 kg)Well-service crews, pills and top-ups
Scheduled contract supplyProgram volumesMulti-well campaigns; brine reclamation by arrangement

Pricing is quoted per order, delivered, usually within one business day of your enquiry; IBCs are supplied on a deposit or exchange basis. Contract pricing is available for scheduled volumes. Lead time depends on quantity: IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Calcium Bromide specification

Calcium bromide brine is specified on CaBr₂ content, specific gravity, pH and chloride. Density sets fluid weight; near-neutral pH protects tubulars and elastomers; low chloride keeps the crystallisation temperature predictable.

ParameterSpecification
AppearanceClear colourless to pale liquid
Calcium bromide (CaBr2)51 – 53 %
Specific gravity (20 °C)1.68 – 1.72
pH6 – 8
Chloride (as CaCl2)≤ 1.0 %
Insoluble matter≤ 0.05 %

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass of CaBr₂ 199.89 g/mol; the 52% w/w brine has a density of 1.70 SG (14.2 lb/gal) and a true crystallisation temperature of about −20 °C; it dilutes with fresh water to any density from 1.00 to 1.70 SG, or blends with calcium chloride brine for lower-cost intermediate densities and with zinc bromide for densities to 2.30 SG; viscosity about 6 mPa·s at 20 °C; divalent calcium means it will precipitate with carbonate and sulphate waters and is incompatible with many anionic polymers.

Calcium bromide, potassium formate or calcium chloride: which brine to buy

PropertyCalcium bromide 52% (this product)Calcium chloride brinePotassium formate 75%
Maximum density1.70 SG neat; 1.80 with ZnBr₂1.39 SG1.57 SG
Cost per unit densityModerateLowestModerate to high
Formation-water compatibilityDivalent; test for carbonate and sulphate scaleDivalentMonovalent; broadly compatible
Corrosion and HSECorrosive to steel without inhibitor; bromide discharge limitsCorrosiveLow corrosion, biodegradable
Best suited to1.40–1.80 SG completion and packer fluids, kill pillsUp to 1.39 SG; see calcium chlorideReservoir drill-in and HPHT; see potassium formate

How much calcium bromide do you need: worked examples

  • Diluting to a 1.50 SG completion brine. A 1.50 SG CaBr₂ brine is about 43% w/w. For 10 m³: brine mass 15,000 kg; CaBr₂ 0.43 × 15,000 = 6,450 kg, which is 6,450 ÷ 0.52 = 12,400 kg (7,300 L) of 52% product plus 2,700 L of fresh water. Volume fractions are close to linear: (1.50 − 1.00) ÷ (1.70 − 1.00) = 71% of the final volume is 52% brine.
  • Two-salt CaCl₂/CaBr₂ brine at 1.60 SG. Blend 1.70 SG calcium bromide with 1.39 SG saturated calcium chloride brine: fraction of CaBr₂ brine ≈ (1.60 − 1.39) ÷ (1.70 − 1.39) = 68%. For 20 m³ use about 13.6 m³ of calcium bromide brine and 6.4 m³ of calcium chloride brine, then check crystallisation temperature, which rises in two-salt blends.
  • Weighting up on location. To raise 40 m³ of 1.40 SG brine to 1.50 SG with 1.70 SG product: V ≈ 40 × (1.50 − 1.40) ÷ (1.70 − 1.50) = 20 m³ of calcium bromide brine, giving 60 m³ at 1.50 SG. Plan tank volume before weighting up.
  • Packer fluid for a 4,000 m well. Annular volume of 9⅝ in casing by 3½ in tubing is about 32 L/m, so 4,000 m needs about 130 m³ of brine at the required density, plus corrosion inhibitor and oxygen scavenger for long-term exposure.
  • Hydrostatic check. A 1.60 SG brine exerts 1,600 × 9.81 × 3,000 = 47.1 MPa (6,830 psi) at 3,000 m TVD; each 0.05 SG adds 1.47 MPa at that depth.

What Calcium Bromide is used for

  • Completion and workover fluids. Clear, solids-free brines from 1.40 to 1.70 SG for perforating, gravel packing, fluid-loss pills and well control, alongside our drilling and completion chemicals.
  • Packer and annular fluids. Long-term inhibited brines above production packers.
  • Kill and displacement fluids. High-density pills for well intervention and plug-and-abandonment.
  • Oil-based mud internal phase. Water-phase salinity control where calcium chloride is not dense enough.
  • Industrial. Mercury emission control in coal-fired flue gas, photographic chemicals, neutron shielding and food-preservation research.

Handling and storage

Calcium bromide 52% brine is not classified as dangerous goods for transport, but it is irritating to eyes and skin and corrosive to carbon steel over time: wear goggles, gloves and an apron, use corrosion inhibitor in long-term applications, and rinse spills with plenty of water because dried brine is hygroscopic and slippery. Keep IBCs closed to stop evaporation raising the density, store above −10 °C, and keep away from strong acids and oxidisers. Always read the Safety Data Sheet before use.

Why buy Calcium Bromide from UD Trading

Every batch is released against our specification for CaBr₂, specific gravity, pH and chloride under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses close to the main drilling supply bases, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals, or contact our team for a quote. Related products: sodium bromide, calcium chloride, potassium formate. Chemical identity reference: CAS 7789-41-5 on CAS Common Chemistry.

Calcium Bromide FAQ

What strength is your calcium bromide?

51–53% w/w liquid at 1.68–1.72 SG, pH 6–8, chloride ≤ 1% as CaCl₂, reported on the batch COA.

What pack sizes do you supply?

1,000 L IBCs and drums, with program contract supply and brine reclamation by arrangement.

How do I dilute it to a target density?

Blend with fresh water or calcium chloride brine using a density table; roughly, 1.50 SG needs 71% of the final volume as 52% product. We supply a blending table with every order.

Is calcium bromide dangerous goods?

No. The 52% brine is not classified as dangerous goods for transport, but it is an irritant and corrosive to steel over time. Follow the SDS.

Can it be used with polymers and formation water?

With care. Calcium precipitates with carbonate and sulphate and degrades many anionic polymers; run compatibility tests or use potassium formate where polymers or scale are a concern.

What is the lead time?

IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days.

Do you deliver to drilling supply bases?

Yes. We deliver Australia-wide by road and rail freight, including Roma, Moomba, Dampier and Darwin, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled IBC and bulk volumes and multi-well programs.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Calcium Bromide

Contact us for pricing, availability and documentation for Calcium Bromide. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia