Hydrochloric Acid
UD Trading supplies hydrochloric acid 32% (HCl, muriatic acid, CAS 7647-01-0) in IBCs and bulk to water and wastewater plants, pool and spa suppliers, mines and mineral processors, steel and galvanising works, oil and gas well-service companies, food and chemical manufacturers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Roma, Moomba, Kalgoorlie and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Hydrochloric Acid at a glance
| Chemical Name | Hydrochloric Acid |
|---|---|
| Chemical Formula | HCl |
| Other Names | Muriatic Acid, Spirits of Salt, Hydrogen Chloride Solution |
| CAS No | 7647-01-0 |
Pack sizes and how to order
| Pack | Net quantity | Typical buyer |
|---|---|---|
| 20 L drum | About 23 kg | Trials, laboratories, workshops, small plants |
| 200 L drum | About 232 kg | Workshops, small and medium users |
| IBC (intermediate bulk container) | 1,000 L (about 1,160 kg) | Water plants, pool suppliers, galvanisers, workshops, well-service crews |
| Scheduled contract supply | Monthly volumes | Plants with bulk storage |
Pricing is quoted per order, delivered, usually within one business day of your enquiry; IBCs are supplied on a deposit or exchange basis. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Hydrochloric Acid specification
Our hydrochloric acid is specified on strength and on impurities that matter for water treatment, food and metal finishing: iron, sulphate, free chlorine and heavy metals.
| Parameter | Specification |
|---|---|
| Appearance | Clear to pale yellow liquid |
| Hydrogen chloride (HCl) | 31 – 33 % |
| Iron (Fe) | ≤ 5 mg/kg |
| Sulphate (SO4) | ≤ 50 mg/kg |
| Free chlorine | ≤ 5 mg/kg |
| Heavy metals (as Pb) | ≤ 5 mg/kg |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass of HCl 36.46 g/mol; 32% solution density about 1.16 kg/L, so each litre contains about 370 g of HCl; boiling point about 84 °C; fumes above about 20% strength; pH of a 1% solution about 0.6; 1 L of 32% acid neutralises about 507 g of alkalinity expressed as CaCO₃; completely miscible with water with a mild heat of dilution (always add acid to water).
32% hydrochloric acid or sulphuric acid: which acid to buy
| Property | Hydrochloric acid 32% (this product) | Sulphuric acid 98% |
|---|---|---|
| Acid equivalents per litre | 10.2 eq/L | 36.8 eq/L |
| Fumes | Yes, HCl vapour; needs ventilation and vented IBCs | Low fuming, but violent heat on dilution |
| Reaction products | Soluble chlorides; no scale | Calcium sulphate scale on carbonate surfaces |
| Metals | Attacks most metals; use HDPE, PP, rubber-lined | Passivates carbon steel at 98% |
| Best suited to | Descaling, pickling, pool pH, well acidising, carbonate dissolution | Bulk pH control, fertiliser, mining leach; see sulphuric acid |
How much hydrochloric acid do you need: worked examples
- Lowering alkalinity or pH at a water plant. Each 1 mg/L of alkalinity (as CaCO₃) consumes 0.73 mg/L of HCl (73 ÷ 100). To cut alkalinity by 20 mg/L in a 10 ML/day plant: 10,000 m³ × 20 g/m³ × 0.73 = 146 kg of HCl, which is 456 kg or about 393 L of 32% acid a day.
- Pool pH reduction. About 1 L of 32% acid per 50,000 L lowers pH by roughly 0.2 at normal alkalinity (80–120 mg/L). Dilute 1:10 in water, pour around the deep end with the pump running, retest after 4 hours. For a milder acid see citric acid.
- Diluting to 15% for well acidising or descaling. 1 kg of 32% acid contains 0.32 kg HCl; a 15% solution needs 2.13 kg of total solution, so add 1.13 kg (1.13 L) of water per kg of 32% acid, or 1.3 L of water per litre of 32% acid. A 10 m³ batch of 15% needs 4.3 m³ of 32% acid and 5.7 m³ of water.
- Dissolving carbonate scale or limestone. CaCO₃ + 2 HCl → CaCl₂ + CO₂ + H₂O. 73 g of HCl dissolves 100 g of CaCO₃, so 1 m³ of 15% HCl (about 161 kg HCl) dissolves up to 220 kg of calcium carbonate, releasing about 97 kg of CO₂ gas: vent the vessel.
- Neutralising spent acid. 1 kg of HCl (2.7 L of 32%) is neutralised by 1.1 kg of caustic soda, 1.45 kg of soda ash or 1.13 kg of 90% hydrated lime.
What Hydrochloric Acid is used for
- Water and wastewater treatment. pH and alkalinity control, membrane and ion-exchange resin cleaning, chlorine dioxide generation with sodium chlorite.
- Pools and spas. pH and total alkalinity reduction, filter and surface cleaning; pairs with sodium hypochlorite (never mix the two: chlorine gas is released).
- Mining and mineral processing. Leaching, ore and equipment descaling, pH control and calcium chloride production.
- Oil and gas. Matrix acidising and wellbore cleanout at 7.5–15%, scale removal, alongside our drilling fluid chemicals.
- Steel, galvanising and manufacturing. Pickling and rust removal, regeneration, food-grade acidulant and chemical synthesis.
Handling and storage
Hydrochloric acid is corrosive, gives off irritating fumes and is classified as dangerous goods for transport: UN 1789, Class 8, Packing Group II. Use it with good ventilation and full chemical PPE (goggles, face shield, acid-resistant gloves and apron), keep an eyewash and shower within reach, and always add acid to water. Store IBCs vented, bunded, out of direct sun and away from metals, bases, oxidisers and especially hypochlorite. Always read the Safety Data Sheet before use.
Why buy Hydrochloric Acid from UD Trading
Every batch is released against our specification for strength, iron, sulphate, free chlorine and heavy metals under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses. Browse our water treatment chemicals, mining chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 7647-01-0 on CAS Common Chemistry.
Hydrochloric Acid FAQ
What strength is your hydrochloric acid?
31–33% HCl, with iron ≤ 5 mg/kg, sulphate ≤ 50 mg/kg and free chlorine ≤ 5 mg/kg, reported on the batch COA.
What pack sizes do you supply?
1,000 L IBCs and drums containers, with scheduled contract supply for plants with storage.
Is hydrochloric acid dangerous goods?
Yes. UN 1789, Class 8 corrosive, Packing Group II. We ship with the correct DG documentation and SDS.
How much acid lowers alkalinity?
0.73 kg of HCl per kg of alkalinity as CaCO₃, which is about 2 L of 32% acid per kilogram of alkalinity removed.
Can I dilute it on site?
Yes. Add acid to water, never water to acid, in a vented HDPE or PP vessel. One litre of 32% acid plus 1.3 L of water gives 15%.
What is the lead time?
It depends on quantity. IBC orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days.
Do you deliver to mine sites and remote locations?
Yes. We deliver Australia-wide by DG-licensed road and rail freight, to ports and remote sites, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled drum, IBC and container volumes.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Hydrochloric Acid
Contact us for pricing, availability and documentation for Hydrochloric Acid. Call 07 3040 7298 or email sales@udtrading.com.au.

