UD Trading Pty Ltd company logo

Citric Acid Anhydrous

UD Trading supplies citric acid anhydrous (C₆H₈O₇, CAS 77-92-9, E330) to food and beverage processors, cleaning-product manufacturers, pool and spa suppliers, water-treatment operators and industrial users across Australia. Orders are dispatched from our warehouses across Australia and delivered to Sydney, Melbourne, Perth, Adelaide, Darwin, Townsville, Gladstone, Port Hedland and regional centres. BP/FCC grade, 99.5–100.5% assay, Certificate of Analysis with every batch, ISO 9001:2015 quality system.

Citric Acid Anhydrous at a glance

Chemical NameCitric Acid Anhydrous
Chemical FormulaC₆H₈O₇
Other Names2-Hydroxy-1,2,3-propanetricarboxylic acid, anhydrous citric acid, E330
CAS No77-92-9

Pack sizes and how to order

PackNet weightTypical buyer
25 kg multi-wall bag with PE liner25 kgCleaning manufacturers, food processors, pool suppliers
Pallet of 25 kg bags, shrink-wrapped1,000 kgDistributors, larger plants
Jumbo bag (FIBC)1,000 kgBulk users, blenders, water utilities
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order and delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; pallet and jumbo-bag quantities are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Citric Acid Anhydrous specification

Anhydrous citric acid has a water limit of 0.5%, so you get the most acid per kilogram, which suits dry blends, powders and tablets.

ParameterSpecification
AppearanceWhite crystalline powder or granules
IdentificationPasses test (BP/FCC)
Assay (C6H8O7, dry basis)99.5 – 100.5 %
Water (Karl Fischer)≤ 0.5 %
Sulphated ash≤ 0.05 %
Oxalate≤ 100 mg/kg
Sulphate≤ 150 mg/kg
Chloride≤ 50 mg/kg
Lead≤ 0.5 mg/kg
Arsenic≤ 1.0 mg/kg
Heavy metals≤ 10 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 192.12 g/mol; density 1.665 g/cm³; melting point 153 °C; solubility about 59% w/w in water at 20 °C (roughly 1.4 kg dissolves per litre of water); pKa 3.13, 4.76 and 6.40; a 1% solution has a pH of about 2.2.

Anhydrous or monohydrate: which grade to buy

PropertyAnhydrous (this product)Monohydrate
Formula weight192.12 g/mol210.14 g/mol
Water content≤ 0.5%8.6% water of crystallisation
Acid per kilogramabout 99.5%about 91.4%
Caking in dry blendsLowHigher; releases water above about 36 °C
Melting point153 °CLoses water from about 70–75 °C, melts near 100 °C
Best suited toPowders, tablets, dry detergents, long storage in humid climatesLiquid preparations where it is dissolved immediately

For Australian conditions, with Queensland and Northern Territory humidity and hot warehouses, anhydrous is the safer stock item, and you receive about 9% more acid per kilogram.

How much citric acid do you need: worked examples

Citric acid is triprotic: 192.12 g supplies three acid equivalents, so its equivalent weight is 64.04 g.

  • Descaling or CIP acid wash. 5–10% w/v, that is 50–100 g per litre of water. A 1,000 L CIP tank at 8% uses 80 kg, or 3.2 bags.
  • Dissolving calcium carbonate scale. 2 C₆H₈O₇ + 3 CaCO₃ → Ca₃(C₆H₅O₇)₂ + 3 CO₂ + 3 H₂O. 384 g of citric acid reacts with 300 g of CaCO₃, so 1 kg of citric acid removes up to 0.78 kg of carbonate scale in theory; allow 20–30% excess in practice.
  • Neutralising caustic soda. C₆H₈O₇ + 3 NaOH → Na₃C₆H₅O₇ + 3 H₂O. 192 g neutralises 120 g of NaOH, so 1 kg of citric acid neutralises 0.625 kg of caustic soda or 0.83 kg of soda ash.
  • Lowering pH in process water. The dose is set by alkalinity, not volume. Each 64 g of citric acid consumes 50 g of alkalinity expressed as CaCO₃. Taking 10,000 L of water from 150 mg/L to 50 mg/L alkalinity consumes 1,000 g of alkalinity, which needs about 1.3 kg of citric acid.

What Citric Acid Anhydrous is used for

  • Food and beverage. Acidulant and preservative (E330) in powdered drinks, effervescent tablets, confectionery, jams and seasonings, where added moisture causes caking. BP/FCC identification tests passed and a COA accompanies every batch.
  • Cleaning and hygiene manufacturers. Descalers, dishwasher powders, bathroom cleaners and CIP acid washes.
  • Pool and spa. pH reduction and metal-stain control in salt-chlorinated pools; pairs with our pool salt and sodium bicarbonate.
  • Water treatment and industrial. Membrane and boiler cleaning, chelation of iron and calcium, passivation of stainless steel, iron control and well acidising alongside hydrochloric acid.
  • Agriculture. Chelating agent and pH buffer in foliar and fertigation blends.
  • Construction. Set retarder for cement, grout and gypsum, typically 0.1–0.3% by binder weight.

Handling and storage

Citric acid is not classified as dangerous goods for transport under the ADG Code, but it is an eye irritant: wear gloves and eye protection when handling powder. Store bags closed, dry and below 30 °C on pallets, away from strong oxidisers and bases. Shelf life is 24 months in original packaging. Always read the Safety Data Sheet before use.

Why buy Citric Acid Anhydrous from UD Trading

Every batch is tested for assay, identity and heavy metals under our ISO 9001:2015 quality system, and we are an Australian-owned supplier with a quote turnaround of one business day. Browse our general industrial chemicals, cleaning chemicals and water treatment chemicals, or contact our team for a quote. Related acids: oxalic acid, tartaric acid. Chemical identity reference: CAS 77-92-9 on CAS Common Chemistry.

Citric Acid Anhydrous FAQ

Is your citric acid food grade?

Yes. It meets BP and FCC identification and purity tests, and a Certificate of Analysis accompanies each batch.

Is your citric acid anhydrous?

Yes. Our citric acid is the anhydrous grade, with no water of crystallisation and a water limit of 0.5%, so you get the most acid per kilogram.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags, 1,000 kg jumbo bags and full container loads.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; pallet and jumbo-bag orders are scheduled; a full container load typically takes 30 to 60 days.

Do you deliver to Perth, Darwin and regional sites?

Yes. We deliver Australia-wide by road and rail freight, including Port Hedland, Dampier and regional mining and agricultural centres. Freight is quoted per consignment.

Is citric acid dangerous goods?

No, it is not classified as dangerous goods for transport, but it is an eye irritant. Follow the SDS.

Anhydrous or monohydrate for a dishwasher powder?

Anhydrous. It will not cake or release water into the blend.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet, jumbo-bag and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Citric Acid

Contact us for pricing, availability and documentation for Citric Acid. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia