UD Trading Pty Ltd company logo

Acetic Acid Glacial

UD Trading supplies glacial acetic acid (ethanoic acid, CH₃COOH, CAS 64-19-7) at 99.5% minimum assay in 200 kg drums and IBCs to food and beverage manufacturers, textile dyers and finishers, water and wastewater plants, cleaning-product makers, rubber and latex processors, oil and gas service companies and chemical plants across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Roma and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system. For diluted grades see our acetic acid solutions.

Glacial Acetic Acid at a glance

Chemical NameAcetic Acid (Glacial)
Chemical FormulaCH3COOH
Other NamesGlacial Acetic Acid, Ethanoic Acid, Methanecarboxylic Acid
CAS No64-19-7

Pack sizes and how to order

PackNet quantityTypical buyer
20 L drumAbout 21 kgTrials, laboratories, workshops, small plants
HDPE drum200 kg (about 190 L)Food processors, dye houses, laboratories, cleaning manufacturers
IBC1,000 L (about 1,050 kg)Water plants, textile mills, latex and chemical plants
Scheduled contract supplyMonthly volumesContinuous dosing and production sites

Pricing is quoted per order, delivered, usually within one business day of your enquiry; IBCs are supplied on a deposit or exchange basis. Contract pricing is available for scheduled volumes. Lead time depends on quantity: drum and IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Glacial Acetic Acid specification

Glacial acetic acid is specified on assay, colour, water, formic acid and acetaldehyde. Low water keeps it truly glacial; low formic acid and acetaldehyde matter for food, pharmaceutical and ester manufacture.

ParameterSpecification
AppearanceClear, colourless liquid
Assay (CH3COOH)≥ 99.5 %
Colour (APHA / Pt-Co)≤ 10
Water (Karl Fischer)≤ 0.20 %
Formic acid≤ 0.05 %
Acetaldehyde≤ 100 mg/kg
Non-volatile residue≤ 20 mg/kg
Iron (Fe)≤ 0.5 mg/kg
Heavy metals (as Pb)≤ 5 mg/kg
Freezing point≥ 15.6 °C

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 60.05 g/mol; density 1.049 kg/L at 20 °C, so each litre contains about 1,045 g of acid; freezing point 16.6 °C, which is why drums solidify in a cold store and must be warmed gently before use; boiling point 118 °C; flash point 39 °C (closed cup), so it is a flammable liquid as well as corrosive; pKa 4.76; fully miscible with water; a 1% solution has pH about 2.9; 1 kg of glacial acid neutralises 0.67 kg of caustic soda or 0.83 kg of calcium carbonate.

Acetic, formic or citric acid: which to buy

PropertyGlacial acetic acid (this product)Formic acid 85%Citric acid anhydrous
FormLiquid, 99.5%Liquid, 85%Dry powder
Acid strength (pKa)4.763.753.13 (first)
Dangerous goodsUN 2789, Class 8 (3), PG IIUN 3412, Class 8, PG IINot DG
FreezingSolidifies at 16.6 °CAbout −10 °CNot applicable
Best suited toFood (vinegar, E260), textiles, latex coagulation, acetates, pH bufferingSilage, leather, oilfield; see formic acidDescaling, food powders, chelation; see citric acid

How much acetic acid do you need: worked examples

  • Food-grade vinegar or brine at 5%. 1 kg of glacial acid plus 19 kg (19 L) of water gives 20 kg of 5% w/w acetic solution. A 10,000 L pickling brine at 5% needs about 525 kg (500 L) of glacial acid; always add acid to water.
  • Textile dyeing. Acid dye baths run at 1–3 g/L of acetic acid to hold pH 4–5. A 5,000 L bath at 2 g/L uses 10 kg, about 9.5 L.
  • Neutralising caustic effluent. CH₃COOH + NaOH → CH₃COONa + H₂O: 60 g of acid per 40 g of NaOH, so 1 kg of caustic soda needs 1.5 kg of glacial acid; a 100 kg caustic CIP discharge takes 150 kg, about 143 L. Each kilogram of acid also neutralises 0.88 kg of soda ash.
  • Descaling. 2 CH₃COOH + CaCO₃ → Ca(CH₃COO)₂ + CO₂ + H₂O: 120 g of acid dissolves 100 g of carbonate, so a 5% solution dissolves about 42 kg of scale per m³. Slower and gentler on stainless and aluminium than hydrochloric acid.
  • Latex coagulation. Natural rubber latex is coagulated with 1–2% acetic acid on dry rubber content; 1 t of dry rubber takes 10–20 kg of glacial acid diluted to 2–3% before addition.

What Glacial Acetic Acid is used for

  • Food and beverage. Vinegar, pickling, acidity regulator and preservative (E260), under food-grade handling.
  • Textiles and leather. pH control in dyeing, printing and finishing; neutralising after caustic treatment.
  • Water treatment and cleaning. pH adjustment, descaling, and buffered acid cleaners, alongside our cleaning chemicals.
  • Chemical manufacture. Acetate salts and esters, vinyl acetate, cellulose acetate, acetic anhydride, pharmaceuticals and photographic chemicals.
  • Oil and gas and rubber. Scale control and pH buffering in oilfield fluids; latex coagulation and rubber processing, with our oilfield chemicals.

Handling and storage

Glacial acetic acid is corrosive and flammable, classified as dangerous goods for transport: UN 2789, Class 8 with subsidiary risk 3, Packing Group II. It causes severe skin burns and eye damage and its vapour irritates the airways: wear goggles, face shield, nitrile or butyl gloves and an apron, and work with ventilation. Store in sealed HDPE or stainless containers above 20 °C to prevent freezing, bunded, away from heat, oxidisers, bases and metals; drums that have solidified should be thawed in a warm room, never with a direct flame or steam. Always read the Safety Data Sheet before use.

Why buy Glacial Acetic Acid from UD Trading

Every batch is released against our specification for assay, colour, water, formic acid and acetaldehyde under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses. Browse our general industrial chemicals, cleaning chemicals and water treatment chemicals, or contact our team for a quote. Chemical identity reference: CAS 64-19-7 on CAS Common Chemistry.

Glacial Acetic Acid FAQ

What grade is your acetic acid?

Glacial, 99.5% minimum assay, water ≤ 0.20%, formic acid ≤ 0.05%, colour ≤ 10 APHA, reported on the batch COA.

What pack sizes do you supply?

200 kg drums and 1,000 L IBCs as standard;.

Is glacial acetic acid dangerous goods?

Yes. UN 2789, Class 8 corrosive with subsidiary risk 3 (flammable), Packing Group II. We ship with the correct DG documentation and SDS.

Why has my drum turned solid?

Glacial acetic acid freezes at 16.6 °C. Thaw it slowly in a warm room (not above 40 °C) and mix before use; freezing does not harm the product.

Is it food grade?

The glacial grade meets the purity limits used for food acidulants; ask us for the food-grade documentation set for your audit.

What is the lead time?

Drum and IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days.

Do you deliver to regional plants?

Yes. We deliver Australia-wide by DG-licensed road and rail freight, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled drum, IBC and bulk volumes.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Acetic Acid Glacial

First, contact us for pricing, availability and documentation for Acetic Acid Glacial. Alternatively, call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia