UD Trading Pty Ltd company logo

Formic Acid

UD Trading supplies formic acid 85% (HCOOH, methanoic acid, CAS 64-18-6) in IBCs and drums to farmers and silage contractors, feed mills, leather and textile processors, oil and gas well-service companies, rubber and latex producers, cleaning-product makers and chemical plants across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Toowoomba, Sydney, Melbourne, Perth, Adelaide, Darwin, Roma and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system. For maximum strength see our formic acid 94%.

Formic Acid at a glance

Chemical NameFormic Acid
Chemical FormulaHCOOH
Other NamesMethanoic Acid, Aminic Acid, Hydrogen Carboxylic Acid
CAS No64-18-6

Pack sizes and how to order

PackNet quantityTypical buyer
20 L drumAbout 24 kgTrials, laboratories, workshops, small plants
HDPE drum200 L (about 240 kg)Farms, feed mills, tanneries, workshops
IBC1,000 L (about 1,195 kg)Silage contractors, well-service crews, latex and chemical plants
Scheduled contract supplySeasonal or monthly volumesSilage season programs, feed mills, continuous users

Pricing is quoted per order, delivered, usually within one business day of your enquiry; IBCs are supplied on a deposit or exchange basis. Contract pricing is available for scheduled volumes, including silage-season programs. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Formic Acid specification

Formic acid is specified on strength, colour, chloride, sulphate and iron. Low chloride and iron matter for feed, leather and oilfield use where corrosion and staining must be avoided.

ParameterSpecification
AppearanceClear colourless liquid
Formic acid (HCOOH)≥ 85 %
Colour (APHA)≤ 10
Chloride≤ 5 mg/kg
Sulphate≤ 10 mg/kg
Iron (Fe)≤ 1.0 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 46.03 g/mol; 85% solution density about 1.195 kg/L, so each litre contains about 1,015 g of HCOOH; boiling point about 107 °C; freezing point about −10 °C (85%); pKa 3.75, making it roughly ten times stronger than acetic acid; fully miscible with water; flash point of the 85% grade about 69 °C, so it is combustible; 1 kg of 85% formic acid neutralises 0.74 kg of caustic soda or 0.92 kg of calcium carbonate.

Formic acid 85%, 94% or acetic acid: which to buy

PropertyFormic acid 85% (this product)Formic acid 94%Acetic acid glacial
Acid per tonne850 kg940 kgAbout 995 kg
Dangerous goodsUN 3412, Class 8, PG IIUN 1779, Class 8 with flammable subsidiary risk, PG IIUN 2789, Class 8 (3), PG II
Acid strength (pKa)3.753.754.76
Freezing pointAbout −10 °CAbout 2 °C16.6 °C
Best suited toSilage, feed, leather, cleaning, general use; stays liquid in cold storesOilfield acidising, latex, chemical synthesis where strength per litre matters; see formic acid 94%Food, textiles, pH buffers; see glacial acetic acid

How much formic acid do you need: worked examples

  • Silage preservation. Typical application is 3–5 L of 85% formic acid per tonne of fresh forage, higher for wet, low-sugar crops. A 1,000 t pit at 4 L/t uses 4,000 L, four IBCs; a contractor doing 250 t a day gets through one IBC a day.
  • Feed acidification. Pig and poultry rations use 0.3–1.0% formic acid or formate. A mill producing 20 t/day at 0.5% needs 100 kg (about 84 L) a day; for a dry, non-corrosive alternative see sodium formate or potassium formate.
  • Oilfield acidising blend. Formic acid is used at 9–13% where hydrochloric acid corrodes too fast at high temperature, or blended with HCl. To make 10 m³ of 10% formic from 85%: 10,000 L × 1.03 kg/L × 0.10 = 1,030 kg of HCOOH, which is 1,212 kg (1,014 L) of 85% acid in 9,000 L of water. Each 1 m³ of 10% formic dissolves about 112 kg of carbonate: 2 HCOOH + CaCO₃ → Ca(HCOO)₂ + CO₂ + H₂O.
  • Leather tanning and dyeing. Pickling floats run at 0.5–1.5% on hide weight; 5,000 kg of hides at 1% uses 50 kg, about 42 L.
  • Neutralising spent acid. 1 kg of 85% acid is neutralised by 0.74 kg of caustic soda, 0.98 kg of soda ash or 0.76 kg of 90% hydrated lime.

What Formic Acid is used for

  • Agriculture and feed. Silage and hay preservation, feed acidifier and antimicrobial, apiary varroa treatment, alongside our agricultural range.
  • Oil and gas. Matrix acidising and scale removal at high bottom-hole temperatures, corrosion-inhibitor intensifier, drilling-fluid pH control, with our oilfield chemicals.
  • Leather and textiles. Pickling, dye fixing, pH adjustment and chrome tanning.
  • Rubber and latex. Coagulation of natural rubber latex.
  • Cleaning and industry. Descalers and limescale removers, pharmaceutical and chemical synthesis, formate salts.

Handling and storage

Formic acid is corrosive and its vapour is irritating: it is classified as dangerous goods for transport (85% as UN 3412, Class 8, Packing Group II; above 85% as UN 1779 with a flammable subsidiary risk). It causes severe skin burns and eye damage and is absorbed through skin: wear goggles, face shield, nitrile or butyl gloves and an apron, and work with ventilation. Store in sealed HDPE or stainless containers, bunded, cool and out of sunlight, away from oxidisers, bases and metals; it slowly decomposes to carbon monoxide and water, so vent containers before opening. Always read the Safety Data Sheet before use.

Why buy Formic Acid from UD Trading

Every batch is released against our specification for strength, colour, chloride, sulphate and iron under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses so silage season and well programs are not waiting on a vessel. Browse our agricultural products, oil and gas chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 64-18-6 on CAS Common Chemistry.

Formic Acid FAQ

What strength is your formic acid?

85% HCOOH minimum in this grade, with colour ≤ 10 APHA, chloride ≤ 5 mg/kg and iron ≤ 1 mg/kg, reported on the batch COA. A 94% grade is also available.

What pack sizes do you supply?

200 L drums and 1,000 L IBCs, with scheduled contract supply for seasonal and continuous users.

Is formic acid dangerous goods?

Yes. Class 8 corrosive, Packing Group II (UN 3412 for 85%). We ship with the correct DG documentation and SDS.

How much formic acid for silage?

3–5 L of 85% acid per tonne of fresh forage, applied evenly at the chopper or pit; about 4 IBCs per 1,000 t.

Can I use it instead of hydrochloric acid for descaling?

Yes. It dissolves carbonate scale with less corrosion and no chloride; 1 kg of 85% acid removes about 0.92 kg of calcium carbonate.

What is the lead time?

Drum and IBC orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days.

Do you deliver to farms and regional sites?

Yes. We deliver Australia-wide by DG-licensed road and rail freight, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled drum and IBC volumes, including silage-season programs.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Formic Acid

Contact us for pricing, availability and documentation for Formic Acid. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia