UD Trading Pty Ltd company logo

Sodium Formate

UD Trading supplies sodium formate (HCOONa, sodium methanoate, CAS 141-53-7) at 98% minimum purity as a white crystalline powder to drilling fluid and well-service companies, airports and councils for de-icing, leather tanners, textile dyers and printers, feed and silage blenders, boiler-water and chemical plants across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Dampier, Darwin, Sydney, Melbourne, Adelaide and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Sodium Formate at a glance

Chemical NameSodium Formate
Chemical FormulaHCOONa
Other NamesFormic Acid Sodium Salt, Salt of Formic Acid
CAS No141-53-7

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag with PE liner25 kg (40 per pallet)Tanneries, dye houses, feed blenders, workshops
Pallet of 25 kg bags, shrink-wrapped1,000 kgMud plants, airports, distributors
Bulk bag (FIBC)1,000 kgBrine plants and drilling programs
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Sodium Formate specification

Sodium formate is specified on purity, moisture, chloride and iron. Low chloride matters for brines and corrosion control; low iron matters for leather and textile colour.

ParameterSpecification
AppearanceWhite crystalline powder
Sodium formate (dry)≥ 98 %
Moisture≤ 1.0 %
Chloride≤ 0.1 %
Iron (Fe)≤ 20 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 68.01 g/mol; solubility about 97 g per 100 g water at 20 °C; a saturated brine reaches about 1.33 SG (11.1 lb/gal) at 40% w/w; a 1% solution has pH 7–8.5 (mildly alkaline buffer); melting point 253 °C; hygroscopic; readily biodegradable with low toxicity to aquatic life, which is why formate brines and de-icers are preferred near sensitive waterways; formate ion also scavenges oxygen and reduces corrosion rates in brines.

Sodium formate, potassium formate or chloride brines: which to buy

PropertySodium formate (this product)Potassium formate 75%NaCl / CaCl₂ brines
Maximum brine density1.33 SG1.57 SG1.20 SG (NaCl), 1.39 SG (CaCl₂)
FormDry powder, mix on siteReady liquidDry or liquid
Corrosion and environmentLow corrosion, biodegradableLow corrosion, biodegradableChloride corrosion, higher ecotoxicity
Polymer compatibilityExcellent; stabilises xanthan and PAC at high temperatureExcellentModerate
Best suited toMid-density solids-free fluids, de-icing, tanning, dyeing, feedHigh-density reservoir fluids; see potassium formateLow-cost brines; see sodium chloride and calcium chloride

How much sodium formate do you need: worked examples

  • Completion or drill-in brine at 1.20 SG. A 1.20 SG sodium formate brine is about 27% w/w. For 10 m³: brine mass 12,000 kg, formate 0.27 × 12,000 = 3,240 kg, which is 3,300 kg of 98% product (132 bags or 3.3 bulk bags) dissolved in about 8,700 L of water. Add xanthan gum at 3–5 kg/m³ and PAC-LV for a solids-free reservoir fluid.
  • Runway and road de-icing. Solid sodium formate is spread at 25–40 g/m² for anti-icing and up to 100 g/m² on established ice. A 3,000 m × 45 m runway (135,000 m²) at 30 g/m² takes about 4 t per application, four bulk bags.
  • Leather tanning. 1–2% on shaved weight as a masking agent in chrome tanning to improve chrome uptake; 5,000 kg of hides at 1.5% uses 75 kg, three bags.
  • Textile dyeing and printing. 10–30 g/L in reactive and sulphur dye baths; a 2,000 L bath at 20 g/L uses 40 kg.
  • Feed and silage acidifier. 0.3–0.8% of the ration as a non-corrosive formate source; a mill producing 20 t/day at 0.5% uses 100 kg, four bags, supplying the same formate as about 67 L of 85% formic acid without the handling risk.

What Sodium Formate is used for

  • Drilling and completion fluids. Solids-free, low-corrosion brines to 1.33 SG that stabilise polymers at high temperature and protect reservoirs, alongside our drilling fluid chemicals.
  • De-icing. Runway, apron, bridge and car-park de-icer with low corrosion and low environmental impact.
  • Leather and textiles. Chrome-tanning masking agent, dye-bath buffer and reducing agent in sulphur dyeing and printing.
  • Animal nutrition and silage. Formate source for feed acidification and preservation.
  • Industrial. Boiler-water oxygen scavenger, buffer in chemical manufacture, formic acid and oxalate production, and flue-gas treatment.

Handling and storage

Sodium formate is not classified as dangerous goods for transport and is of low toxicity; the powder is a mild eye irritant, so use eye protection and a dust mask when tipping bags. It is hygroscopic: keep bags sealed, dry and off the ground to prevent caking. Always read the Safety Data Sheet before use.

Why buy Sodium Formate from UD Trading

Every batch is released against our specification for purity, moisture, chloride and iron under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 141-53-7 on CAS Common Chemistry.

Sodium Formate FAQ

What purity is your sodium formate?

98% minimum, moisture ≤ 1%, chloride ≤ 0.1%, iron ≤ 20 mg/kg, reported on the batch COA.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.

How dense can a sodium formate brine go?

About 1.33 SG at saturation. For higher densities use potassium formate (to 1.57 SG) or blend the two.

Is sodium formate dangerous goods?

No. It is not classified as dangerous goods for transport and is readily biodegradable.

Is it less corrosive than salt for de-icing?

Yes. Formate de-icers are far less corrosive to steel, aluminium and concrete than chloride salts and are the standard choice on airport pavements.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to drilling supply bases?

Yes. We deliver Australia-wide by road and rail freight, including Roma, Moomba, Dampier and Darwin, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet, bulk-bag and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Sodium Formate

Contact us for pricing, availability and documentation for Sodium Formate. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia