Sodium Chloride
UD Trading supplies refined sodium chloride (industrial salt, NaCl ≥ 99.0%, CAS 7647-14-5) as white crystals and granules to drilling fluid companies, water-softener and ion-exchange users, food and hide processors, chemical manufacturers, stockfeed mills, dye houses and councils across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Sydney, Melbourne, Perth, Adelaide, Darwin, Port Hedland and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Sodium Chloride at a glance
| Chemical Name | Sodium Chloride |
|---|---|
| Chemical Formula | NaCl |
| Other Names | Common Salt, Rock Salt |
| CAS No | 7647-14-5 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag with PE liner | 25 kg (40 per pallet) | Softener users, food processors, workshops, drilling crews |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Councils, distributors, mud plants |
| Bulk bag (FIBC) | 1,000 kg | Brine plants, chlor-alkali, hide curing, regeneration plants |
| Full container load (FCL) | 24–26 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. For salt-water chlorinators see our pool salt, and for de-icing and dust suppression see rock salt. Request a quote or call +61 7 3040 7298.
Sodium Chloride specification
Refined salt is specified on NaCl content, moisture, insolubles, calcium, magnesium, sulphate and lead. Low calcium and magnesium matter for brine clarity, resin regeneration and chlor-alkali feed; low insolubles keep filters and nozzles clear.
| Parameter | Specification |
|---|---|
| Appearance | White crystals / granules |
| Sodium chloride (NaCl, dry) | ≥ 99.0 % |
| Moisture | ≤ 0.5 % |
| Water-insoluble matter | ≤ 0.1 % |
| Calcium (Ca) | ≤ 0.1 % |
| Magnesium (Mg) | ≤ 0.05 % |
| Sulphate (SO4) | ≤ 0.3 % |
| Lead | ≤ 2.0 mg/kg |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 58.44 g/mol; 39.3% sodium and 60.7% chloride by mass; solubility 36 g per 100 g water at 20 °C, almost independent of temperature; saturated brine 26.4% w/w with a density of 1.20 SG (10.0 lb/gal); a 10% brine has a density of 1.071 and a 20% brine 1.148; a 23.3% brine freezes at −21 °C (the eutectic); 1 g/L of NaCl adds 607 mg/L of chloride and 393 mg/L of sodium; dissolving is slightly endothermic.
Refined salt, pool salt or rock salt: which grade to buy
| Property | Refined sodium chloride (this product) | Pool salt | Rock salt |
|---|---|---|---|
| NaCl | ≥ 99.0%, Ca ≤ 0.1%, Mg ≤ 0.05% | ≥ 99.5%, very low insolubles | 95–98%, clay and iron present |
| Crystal size | Fine to medium, consistent | Fine, fast dissolving | Coarse |
| Best suited to | Brines, softener regeneration, chlor-alkali, food, hides, feed | Salt-chlorinator pools, mineral pools | De-icing, dust suppression, stock licks |
How much sodium chloride do you need: worked examples
- Drilling or completion brine at 1.10 SG. A 1.10 SG NaCl brine is about 14% w/w. For 10 m³: brine mass 11,000 kg, NaCl 0.14 × 11,000 = 1,540 kg, which is 1,556 kg of 99% salt (63 bags or 1.6 bulk bags) in about 9,400 L of water. The maximum NaCl brine is 1.20 SG; for heavier fluids use calcium chloride or potassium chloride for shale inhibition.
- Saturated salt mud. Saturating 100 m³ of water takes about 36 kg per 100 L, or 36 t of salt, plus 3–5% for cuttings and dilution; add salt before bentonite only if the clay has been prehydrated in fresh water.
- Water-softener regeneration. Typical brine use is 100–150 g of salt per litre of resin per regeneration. An industrial softener with 500 L of resin regenerating daily at 120 g/L uses 60 kg a day, about 22 t a year.
- Chloride budget. Each 1 g/L of NaCl adds 607 mg/L of chloride, so a 3% brine carries about 18,000 mg/L; allow for this in discharge limits and corrosion control.
- Food and hide brining. A 10% w/w pickling brine needs 100 kg of salt per 900 L of water (about 935 L of brine); curing hides typically uses 35–40% of green hide weight in salt.
What Sodium Chloride is used for
- Drilling fluids. Salt-saturated and salt-polymer muds for drilling salt sections, inhibitive brines and completion fluids to 1.20 SG, alongside our drilling fluid chemicals.
- Water treatment. Regeneration brine for ion-exchange softeners and nitrate removal; on-site hypochlorite generation.
- Chemical manufacture. Chlor-alkali feed for chlorine, caustic soda and sodium hypochlorite; sodium chlorate, soda ash and dye salting-out.
- Food, hides and feed. Pickling, curing, cheese, hide preservation and stockfeed.
- Civil and industrial. Dust suppression brines, de-icing, textile dyeing and oil-field disposal fluids.
Handling and storage
Sodium chloride is not classified as dangerous goods for transport under the ADG Code and is not hazardous to handle. It is hygroscopic above about 75% relative humidity, so keep bags sealed, dry and off the ground; brines are corrosive to mild steel and galvanised fittings, so use plastic, FRP or stainless for storage. Always read the Safety Data Sheet before use.
Why buy Sodium Chloride from UD Trading
Every batch is released against our specification for NaCl, calcium, magnesium, sulphate and insolubles under our ISO 9001:2015 quality system, and we hold stock in multiple Australian warehouses for pallet and bulk-bag orders. Browse our general industrial chemicals and water treatment chemicals, or contact our team for a quote. Chemical identity reference: CAS 7647-14-5 on CAS Common Chemistry.
Sodium Chloride FAQ
What purity is your sodium chloride?
Refined salt at 99.0% NaCl minimum, calcium ≤ 0.1%, magnesium ≤ 0.05%, insolubles ≤ 0.1%, reported on the batch COA.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags, 1,000 kg bulk bags and full container loads.
How much salt makes a saturated brine?
About 360 g per litre of water, giving a 26% brine at 1.20 SG. Ten cubic metres of water takes 3.6 t of salt.
Is sodium chloride dangerous goods?
No. It is not classified as dangerous goods for transport and is not hazardous to handle.
Can I use it in my pool chlorinator?
You can, but our pool salt grade has lower insolubles and dissolves faster, which keeps the water clear. Use refined salt where brine clarity and low hardness matter.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to drilling supply bases and regional sites?
Yes. We deliver Australia-wide by road and rail freight, including Roma, Moomba, Port Hedland and Darwin, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet, bulk-bag and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Sodium Chloride
Contact us for pricing, availability and documentation for Sodium Chloride. Call 07 3040 7298 or email sales@udtrading.com.au.

