UD Trading Pty Ltd company logo

Potassium Chloride

UD Trading supplies potassium chloride (KCl, muriate of potash, CAS 7447-40-7) at 97% minimum purity as white crystals and granules to drilling fluid companies and drilling contractors, fertiliser blenders, growers, feed millers, water-softener users and chemical manufacturers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Port Hedland, Dampier, Darwin, Sydney, Melbourne, Adelaide and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Potassium Chloride at a glance

Chemical NamePotassium Chloride
Chemical FormulaKCl
Other NamesMuriate of Potash, Potassium Salt
CAS No7447-40-7

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag with PE liner25 kg (40 per pallet)Drilling crews, growers, feed mills, softener users
Pallet of 25 kg bags, shrink-wrapped1,000 kgMud plants, fertiliser blenders, distributors
Bulk bag (FIBC)1,000 kgDrilling programs, liquid mud plants, bulk blending
Full container load (FCL)24–26 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry, including Dampier, Darwin and Port Hedland delivered rates for drilling programs. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Potassium Chloride specification

Potassium chloride is specified on KCl content, K₂O equivalent, moisture, insolubles, sodium chloride and heavy metals. Low insolubles matter for brine clarity and mud filtration; low NaCl matters where chloride is being tracked.

ParameterSpecification
AppearanceWhite crystals / granules
Potassium chloride (KCl, dry)≥ 97.0 %
Potassium oxide (K2O) equivalent≥ 60 %
Moisture≤ 0.5 %
Water-insoluble matter≤ 0.1 %
Sodium chloride (NaCl)≤ 1.0 %
Heavy metals (as Pb)≤ 10 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 74.55 g/mol; 97% KCl contains about 50.9% potassium (K) and 61% K₂O equivalent; solubility 34 g per 100 g water at 20 °C; saturated brine about 24% w/w with a density of 1.16 SG (9.7 lb/gal); a 10% w/w brine has a density of 1.063; neutral pH in solution; dissolves with mild cooling (endothermic), so brines can be mixed quickly without heat problems.

Which potassium source to specify

PropertyPotassium chloride 97% (this product)Potassium sulphatePotassium formate brine
K₂O equivalent61%50–52%Not a fertiliser
ChlorideAbout 46% ClChloride-freeChloride-free
Max brine density1.16 SGLow solubility; not a brineUp to 1.57 SG
Best suited toShale-inhibitive drilling muds, completion brines, most crops, feed, softenersChloride-sensitive crops; see potassium sulphateHigh-density, low-solids reservoir fluids; see potassium formate

How much potassium chloride do you need: worked examples

  • KCl polymer drilling mud at 5% w/w. About 50 kg of KCl per m³ of water. A 100 m³ active system needs 5,000 kg of 100% KCl, which is 5,150 kg of 97% product, five bulk bags or 206 × 25 kg bags. Combine with PAC-LV for fluid loss and xanthan gum for suspension; prehydrate bentonite in fresh water before adding salt.
  • Completion brine at 1.10 SG. A 1.10 SG KCl brine is about 15.5% w/w. For 10 m³: brine mass 11,000 kg, KCl 0.155 × 11,000 = 1,705 kg of 100% KCl, 1,760 kg of 97% product (71 bags) dissolved in about 9,300 L of water. For densities above 1.16 use calcium chloride or sodium bromide.
  • Potassium for a crop. To apply 100 kg of K₂O per hectare you need 100 ÷ 0.61 = 164 kg of 97% KCl per hectare. A 500 ha program needs 82 t, about three container loads.
  • Fertigation stock solution. A 10% w/w KCl stock (100 kg per 900 L water) injected at 1:100 delivers 1 g/L of KCl, about 0.52 g/L of K, to the irrigation line.
  • Chloride contribution. Each 1 g/L of KCl adds 476 mg/L of chloride, so a 5% mud carries about 24,000 mg/L chloride; account for this in corrosion monitoring and disposal.

What Potassium Chloride is used for

  • Drilling fluids. Shale inhibitor in KCl polymer and KCl glycol water-based muds; the potassium ion exchanges into clay and suppresses swelling, which keeps the hole stable in reactive shales.
  • Completion and workover brines. Clear, solids-free brines to 1.16 SG that protect clay-bearing reservoirs.
  • Agriculture. Muriate of potash for broadacre, horticulture and fertigation; blends with our agricultural range.
  • Animal nutrition. Potassium source in feed premixes and electrolytes.
  • Industrial. Water-softener regeneration where sodium must be limited, food processing, and feedstock for potassium hydroxide and other potassium chemicals.

Handling and storage

Potassium chloride is not classified as dangerous goods for transport under the ADG Code and is not hazardous to handle beyond dust and mild eye irritation. It is hygroscopic: keep bags sealed, dry and off the ground to prevent caking, and lift bulk bags by all four loops. Always read the Safety Data Sheet before use.

Why buy Potassium Chloride from UD Trading

Drilling programs and growers need the right tonnage at the right port on time. Every batch is released against our specification for KCl, insolubles and NaCl under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and agricultural products, or contact our team for a quote. Chemical identity reference: CAS 7447-40-7 on CAS Common Chemistry.

Potassium Chloride FAQ

What purity is your potassium chloride?

97% KCl minimum, 60% K₂O minimum, moisture ≤ 0.5%, insolubles ≤ 0.1%, reported on the batch COA.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags, 1,000 kg bulk bags and full container loads.

How much KCl for a 5% drilling mud?

About 51.5 kg of 97% product per cubic metre of water; a 100 m³ system needs about 5.2 t.

Is potassium chloride dangerous goods?

No. It is not classified as dangerous goods for transport. Refer to the SDS for dust guidance.

Can it be used as fertiliser?

Yes. It is muriate of potash at 61% K₂O equivalent, suitable for broadacre, horticulture and fertigation except for chloride-sensitive crops, where potassium sulphate is the alternative.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to Dampier, Darwin and Port Hedland?

Yes. We quote delivered rates to drilling supply bases and ports Australia-wide, with freight per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet, bulk-bag and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Potassium Chloride

Contact us for pricing, availability and documentation for Potassium Chloride. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia