Sodium Lignosulphonate – Alkaline Grade
UD Trading supplies alkaline-grade sodium lignosulphonate (lignin sulfonate sodium salt, CAS 8061-51-6), a brown free-flowing powder with at least 60% lignosulphonate on a dry basis, to drilling fluid companies, mud engineers, concrete admixture producers, mining and dust-control contractors, pelletising plants and industrial users across Australia. Supplied in 25 kg bags, orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Port Hedland, Darwin and regional centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system. A neutral grade is also available.
Sodium Lignosulphonate (Alkaline) at a glance
| Chemical Name | Sodium Lignosulphonate |
|---|---|
| Chemical Formula | C20H24Na2O10S2 (approx.) |
| Other Names | Lignin Sulfonate, Sodium Salt |
| CAS No | 8061-51-6 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag | 25 kg (40 per pallet) | Rig sites, admixture plants, workshops |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Mud plants, drilling contractors, manufacturers |
| Bulk bag (FIBC, jumbo bag) | 1,000 kg | Plants, mines, contractors, scheduled supply |
| Full container load (FCL) | 20–24 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Sodium Lignosulphonate (Alkaline) specification
Alkaline-grade sodium lignosulphonate is a spray-dried, chrome-free lignin by-product of sulphite wood pulping, tested for lignosulphonate content, moisture, pH, insolubles and reducing sugars on every batch.
| Parameter | Specification |
|---|---|
| Appearance | Brown free-flowing powder |
| Lignosulphonate content (dry basis) | ≥ 60 % |
| Moisture (loss on drying, 105 °C) | ≤ 7.0 % |
| pH (1% solution) | 10.0 – 11.5 |
| Water-insoluble matter | ≤ 2.0 % |
| Total reducing matter | ≤ 7.0 % |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: an anionic polyelectrolyte with molecular weight mostly 5,000–50,000 g/mol carrying sulphonate groups on a lignin backbone; bulk density about 500–600 kg/m³; fully water-soluble at any pH, forming dark brown solutions; a 50% solution has a density of about 1.25 g/mL and viscosity around 100–200 mPa·s; pH of a 1% solution 10.0–11.5; thermally stable to about 150 °C in drilling fluids; surface-active, so it both disperses solids and reduces interfacial tension; biodegradable.
Alkaline or neutral grade: which lignosulphonate to buy
| Property | Alkaline grade (this product) | Neutral grade |
|---|---|---|
| Lignosulphonate content (dry) | ≥ 60% | ≥ 55% |
| pH of 1% solution | 10.0–11.5 | 7.0–9.5 |
| Reducing sugars | ≤ 7% | ≤ 7% |
| Effect on mud pH | Supports the pH 9.5–11 needed for lignosulphonate muds | Needs more caustic to hold mud pH |
| Best suited to | Drilling mud deflocculant, cement and concrete dispersant, dust control, mineral processing, ceramic and refractory binders | Concrete water reducer where pH matters, animal feed pellet binder, agrochemical and dye dispersant |
How much sodium lignosulphonate do you need: worked examples
- Deflocculating a water-based drilling mud. Lignosulphonate muds run 6–15 kg/m³ (2–5 lb/bbl) with caustic soda at about 1 kg per 4 kg of lignosulphonate to hold pH 9.5–10.5. An 80 m³ system treated at 10 kg/m³ needs 800 kg (32 bags) plus about 200 kg of caustic; daily maintenance of 1–2 kg/m³ adds 80–160 kg a day. The anionic polymer adsorbs on clay edges and breaks up flocs, lowering yield point and gel strengths without diluting the system.
- Water-reducing concrete admixture. Dosed at 0.2–0.4% by mass of cement it gives 5–10% water reduction. A 350 kg/m³ cement mix at 0.3% needs 1.05 kg/m³; a 1,000 m³ pour needs 1,050 kg, 42 bags, and lets you cut about 14 L of water per m³ (8% of 180 L) for the same slump, raising strength or saving cement. Expect 1–2 hours of set retardation.
- Haul-road and stockpile dust suppression. Apply 0.5–1.0 kg/m² of dry lignosulphonate as a 20–30% solution for the initial treatment, then lighter top-ups. A 10,000 m² laydown yard at 0.75 kg/m² needs 7.5 t, sprayed as about 30 t (roughly 27 m³) of 25% solution.
- Pellet and briquette binder. 1–3% by mass of dry feed. A plant pelletising 40 t a day of ore fines or fertiliser at 2% uses 800 kg a day, 32 bags, mixed as a 40–50% solution.
- Grinding aid and dispersant in mineral processing. 0.2–0.5 kg per tonne of ore in wet grinding or slurry pipelines. A 5,000 t/day concentrator at 0.3 kg/t uses 1.5 t a day.
What Sodium Lignosulphonate (Alkaline) is used for
- Drilling fluid thinner and deflocculant. Controls rheology and gel strengths in freshwater, seawater and lime muds, improves filtration control with bentonite, and stabilises mud against cement and salt contamination; a chrome-free replacement for ferrochrome lignosulphonate.
- Oil-well cement retarder and dispersant. Extends thickening time and lowers slurry viscosity at moderate temperatures.
- Concrete and mortar. Plasticiser and water reducer in ready-mix, precast and grout; set retarder in hot-weather concreting.
- Dust control and soil stabilisation. Binds fines on haul roads, laydown yards, rail wagons and stockpiles; often blended with calcium chloride.
- Binders. Pelletising and briquetting of ores, coal fines, fertilisers and refractories; green strength in ceramics and foundry cores.
- Dispersant. Gypsum board and cement grinding, carbon black, dyes, pigments, pesticide wettable powders and leather tanning.
Handling and storage
Sodium lignosulphonate is not classified as dangerous goods for transport under the ADG Code. It is a fine organic powder: control dust, use a P2 mask when bag-dumping and earth equipment because the dust is combustible. Solutions are alkaline and stain skin and concrete brown, so wear gloves and eye protection and rinse spills promptly. Store bags dry and off the ground; the powder is hygroscopic and cakes if it absorbs moisture. Always read the Safety Data Sheet before use.
Why buy Sodium Lignosulphonate from UD Trading
Lignosulphonate with high sugar or insolubles foams, ferments and clogs mixers. We release every lot against an approved specification for lignosulphonate content, moisture, pH, insolubles and reducing matter under our ISO 9001:2015 quality system, hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals, mining chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 8061-51-6 on CAS Common Chemistry.
Sodium Lignosulphonate FAQ
What is the difference between alkaline and neutral grade?
Alkaline grade has a 1% solution pH of 10.0–11.5 and at least 60% lignosulphonate, suited to drilling muds and cement. Neutral grade is pH 7.0–9.5 with at least 55% lignosulphonate for concrete admixtures, feed binders and agrochemicals.
How is it packed?
In 25 kg bags, 40 bags to a 1,000 kg pallet, with full container loads available for scheduled supply.
How much lignosulphonate goes in drilling mud?
Typically 6–15 kg/m³ (2–5 lb/bbl) with caustic soda to hold pH 9.5–10.5, and 1–2 kg/m³ a day for maintenance. An 80 m³ system at 10 kg/m³ needs 800 kg.
Is it chrome-free?
Yes. Sodium lignosulphonate contains no chromium, unlike the ferrochrome lignosulphonate thinners it replaces, which simplifies waste-fluid disposal.
Is sodium lignosulphonate dangerous goods?
No. It is not classified as dangerous goods for transport, but the dust is combustible and solutions are alkaline. Refer to the SDS.
What dose is used as a concrete water reducer?
0.2–0.4% by mass of cement, giving 5–10% water reduction with some set retardation. Trial-batch before changing a mix design.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Sodium Lignosulphonate
Contact us to discover how our Sodium Lignosulphonate can support your construction, agriculture, or industrial needs.

