Sodium Lignosulphonate – Neutral Grade
UD Trading supplies neutral-grade sodium lignosulphonate (lignin sulfonate sodium salt, CAS 8061-51-6), a yellow-brown to brown free-flowing powder with at least 55% lignosulphonate on a dry basis and a near-neutral pH, to concrete admixture producers, feed mills, fertiliser and agrochemical formulators, ceramic and refractory makers, dust-control contractors and industrial users across Australia. Supplied in 25 kg bags, orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin and regional centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system. An alkaline grade is also available for drilling muds and other high-pH systems.
Sodium Lignosulphonate (Neutral) at a glance
| Chemical Name | Sodium Lignosulphonate – Neutral Grade (Powder) |
|---|---|
| Other Names | Sodium Lignosulphonate, Lignosulfonic Acid Sodium Salt, Sulfonated Lignin Sodium Salt |
| CAS No | 8061-51-6 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag | 25 kg (40 per pallet) | Admixture plants, feed mills, formulators, workshops |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Manufacturers, pelletising plants, distributors |
| Bulk bag (FIBC, jumbo bag) | 1,000 kg | Plants, mines, contractors, scheduled supply |
| Full container load (FCL) | 20–24 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Sodium Lignosulphonate (Neutral) specification
Neutral-grade sodium lignosulphonate is a spray-dried, chrome-free lignin product from sulphite pulping, tested for lignosulphonate content, dry matter, pH, insolubles, reducing sugars and sulphate on every batch.
| Parameter | Specification |
|---|---|
| Appearance | Yellow-brown to brown free-flowing powder |
| Lignosulphonate content (dry basis) | ≥ 55 % |
| Dry matter (105 °C) | ≥ 95.0 % |
| pH (1% solution) | 7.0 – 9.5 |
| Water-insoluble matter | ≤ 1.5 % |
| Total reducing matter | ≤ 7.0 % |
| Sulphate (as Na2SO4) | ≤ 5.0 % |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: an anionic polyelectrolyte with molecular weight mostly 5,000–50,000 g/mol; bulk density about 500–600 kg/m³; fully water-soluble, giving brown solutions; a 40% solution has a density of about 1.20 g/mL; pH of a 1% solution 7.0–9.5; surface-active and strongly adsorbing on cement, clay and mineral surfaces, which is the basis of its dispersing and water-reducing action; thermally stable to about 150 °C; biodegradable and of low toxicity, which is why it is accepted as a feed pellet binder.
Neutral or alkaline grade: which lignosulphonate to buy
| Property | Neutral grade (this product) | Alkaline grade |
|---|---|---|
| Lignosulphonate content (dry) | ≥ 55% | ≥ 60% |
| pH of 1% solution | 7.0–9.5 | 10.0–11.5 |
| Sulphate (as Na₂SO₄) | ≤ 5% | Not limited |
| Effect on product pH | Minimal; safe in neutral formulations and feeds | Raises pH; suits mud and cement systems |
| Best suited to | Concrete water reducer, feed and fertiliser pellet binder, pesticide and dye dispersant, ceramics, dust control | Drilling mud deflocculant, oil-well cement, mineral processing, refractory binders |
How much sodium lignosulphonate do you need: worked examples
- Water-reducing concrete admixture. Dosed at 0.2–0.4% by mass of cement for 5–10% water reduction. A 320 kg/m³ cement mix at 0.25% needs 0.8 kg/m³; a 2,000 m³ precast run uses 1,600 kg, 64 bags. Admixture plants usually dissolve it to a 30–40% liquid: 1,600 kg of powder makes about 4,600 kg of 35% solution. Expect 1–2 hours of set retardation at the top of the dose range.
- Animal feed pellet binder. 1–2% of the mash. A mill pelleting 300 t a week at 1.5% uses 4.5 t, or 180 bags, improving pellet durability index and cutting fines returned to the press.
- Fertiliser granulation and dust binding. 0.5–1% sprayed as a 30% solution onto the granulator or coating drum. A 50 t/day granulation plant at 0.8% uses 400 kg of powder a day as about 1,330 kg of solution.
- Pesticide wettable powder dispersant. 2–5% of the formulation. A 10 t batch of wettable powder at 3% contains 300 kg of lignosulphonate, 12 bags, keeping the active suspended in the spray tank (suspensibility above 70%).
- Dust suppression on unsealed roads. 0.5–1.0 kg/m² of dry product as a 20–30% solution for the initial treatment. A 3 km access road 8 m wide (24,000 m²) at 0.6 kg/m² needs 14.4 t, sprayed as about 58 t of 25% solution.
What Sodium Lignosulphonate (Neutral) is used for
- Concrete and mortar admixtures. Plasticiser, water reducer and set retarder for ready-mix, precast, grouts and hot-weather concreting.
- Animal feed. Pellet binder and anti-dust agent for livestock, poultry and aquaculture feeds.
- Fertilisers and agrochemicals. Granulation binder, anti-caking and dust-control coating, dispersant in wettable powders and suspension concentrates, and a carrier for chelated micronutrients alongside magnesium sulphate and potassium sulphate.
- Dust control and soil stabilisation. Binds fines on unsealed roads, laydown yards and stockpiles, often blended with calcium chloride.
- Ceramics, refractories and foundry. Plasticiser and green-strength binder for tiles, bricks, castables and cores.
- Other dispersant uses. Gypsum board slurries, carbon black, dyes and pigments, leather tanning and water-treatment scale control.
Handling and storage
Sodium lignosulphonate is not classified as dangerous goods for transport under the ADG Code. It is a fine organic powder: control dust, use a P2 mask when bag-dumping and earth equipment because the dust is combustible. Solutions stain skin, clothing and concrete brown, so wear gloves and eye protection and rinse spills promptly. Store bags dry and off the ground; the powder is hygroscopic and cakes if it absorbs moisture. Always read the Safety Data Sheet before use.
Why buy Sodium Lignosulphonate from UD Trading
Lignosulphonate with high sugar or insolubles foams, ferments in liquid admixtures and clogs spray nozzles. We release every lot against an approved specification for lignosulphonate content, dry matter, pH, insolubles, reducing matter and sulphate under our ISO 9001:2015 quality system, and hold stock in multiple Australian warehouses. Browse our general industrial chemicals and mining chemicals, or contact our team for a quote. Chemical identity reference: CAS 8061-51-6 on CAS Common Chemistry.
Sodium Lignosulphonate (Neutral) FAQ
What is neutral-grade sodium lignosulphonate?
A sodium lignosulphonate with a 1% solution pH of 7.0–9.5, at least 55% lignosulphonate on a dry basis, 95% minimum dry matter and sulphate limited to 5%, for uses where the alkaline grade would upset formulation pH.
How is it packed?
In 25 kg bags, 40 bags to a 1,000 kg pallet, with full container loads available for scheduled supply.
What dose is used as a concrete water reducer?
0.2–0.4% by mass of cement, giving 5–10% water reduction with some set retardation. Trial-batch before changing a mix design.
Can it be used in animal feed?
Neutral-grade lignosulphonate is widely used as a pellet binder at 1–2%. Confirm your requirements at the time of order so we can supply the batch documentation your feed quality system requires.
Is sodium lignosulphonate dangerous goods?
No. It is not classified as dangerous goods for transport, but the dust is combustible. Refer to the SDS.
Is it the same as calcium lignosulphonate?
No. Calcium lignosulphonate is the calcium salt and is less soluble and lower in sulphonate activity. Sodium lignosulphonate dissolves fully and is preferred for admixtures and dispersants.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Sodium Lignosulphonate – Neutral Grade
Contact us for pricing, availability and documentation for Sodium Lignosulphonate – Neutral Grade. Call 07 3040 7298 or email sales@udtrading.com.au.

