Choline Chloride
UD Trading supplies choline chloride 70% liquid ((2-hydroxyethyl)trimethylammonium chloride, C₅H₁₄ClNO, CAS 67-48-1) in IBCs and drums to drilling fluid companies, mud engineers, coal seam gas and fracturing contractors, feed mills and premix manufacturers, and industrial users across Australia. As a drilling additive it is a low-toxicity clay and shale inhibitor that replaces potassium chloride; in animal nutrition it is vitamin B4. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Darwin and regional centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system.
Choline Chloride at a glance
| Chemical Name | Choline Chloride |
|---|---|
| Chemical Formula | C5H14ClNO |
| Other Names | (2-Hydroxyethyl)trimethylammonium Chloride, Vitamin B4 |
| CAS No | 67-48-1 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 20 L drum | About 22 kg | Trials, laboratories, workshops, small plants |
| 200 L HDPE drum | About 220 kg | Feed mills, premix plants, small rigs |
| 1,000 L IBC | About 1,100 kg | Drilling contractors, mud plants, frac crews |
| Full container load (FCL) | About 20 IBCs | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Choline Chloride specification
Our choline chloride is the 70% aqueous solution, tested for assay, free trimethylamine, pH, glycol impurities and colour on every batch.
| Parameter | Specification |
|---|---|
| Appearance | Colourless to pale yellow liquid |
| Choline chloride | ≥ 70 % |
| Trimethylamine (free) | ≤ 300 mg/kg |
| pH (25%) | 5 – 7 |
| Ethylene glycol / others | ≤ 0.5 % |
| Colour (APHA) | ≤ 100 |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 139.62 g/mol; the 70% solution has a density of about 1.10 g/mL at 20 °C, so one IBC holds about 1,100 kg containing 770 kg of choline chloride; freezing point below −10 °C; fully miscible with water; pH 5–7; a quaternary ammonium salt, so it is cationic and adsorbs strongly onto negatively charged clay surfaces; thermally stable in drilling fluids to about 150 °C; faint fishy odour from trace trimethylamine; readily biodegradable.
Choline chloride or potassium chloride: which shale inhibitor to buy
| Property | Choline chloride 70% (this product) | Potassium chloride |
|---|---|---|
| Typical concentration | 2–5% v/v (20–50 L/m³) | 3–7% w/v (30–70 kg/m³) |
| Form and mixing | Pumpable liquid, no dissolving time | Crystals, needs mixing through hopper |
| Chloride added to mud | About 4–10 g/L | About 14–33 g/L |
| Effect on mud density | Negligible | Raises density slightly |
| Disposal and environment | Biodegradable, lower chloride in waste | High chloride and potassium in waste fluid |
| Best suited to | Coal seam gas, environmentally sensitive sites, polymer muds, frac clay control | Conventional water-based muds, reactive shales, high-temperature wells |
How much choline chloride do you need: worked examples
- Shale inhibition in a water-based mud at 3% v/v. 30 L of 70% liquid per m³ of mud. A 100 m³ active system needs 3,000 L, three IBCs, with 30 L added per m³ of new mud built during the hole section. At 1.10 g/mL that is 3,300 kg of solution containing 2,310 kg of choline chloride.
- Chloride contribution. Choline chloride is 25.4% chloride by mass (35.45 ÷ 139.62). At 3% v/v the mud carries 30 L × 1.10 × 0.70 × 0.254 ≈ 5.9 kg of chloride per m³, about 5,900 mg/L, compared with roughly 24,000 mg/L from 5% KCl.
- Clay stabiliser in fracturing fluid. Dosed at 1–2 L/m³ (0.1–0.2% v/v). A 4,000 m³ multi-stage frac at 1.5 L/m³ consumes 6,000 L, six IBCs.
- Broiler feed. A finished diet calling for 1,500 mg/kg of choline chloride needs 1.5 ÷ 0.70 = 2.14 kg of 70% liquid per tonne of feed. A mill producing 500 t a week uses about 1,070 kg, one IBC, sprayed into the mixer or liquid premix.
- Converting between activities. 1 kg of 70% liquid = 0.70 kg choline chloride (the choline cation is 104.17 ÷ 139.62 = 74.6% of the salt, so 0.70 × 0.746 = 0.52 kg of choline per kg of liquid).
What Choline Chloride is used for
- Drilling fluid shale and clay inhibitor. The choline cation exchanges onto clay surfaces and suppresses swelling and dispersion of reactive shales in coal seam gas, oil and gas and mineral exploration drilling, used with PAC-LV, xanthan gum and bentonite.
- Fracturing and completion fluids. Permanent clay stabiliser that prevents fines migration and formation damage, and a low-toxicity alternative to KCl in completion brines.
- Animal feed. Essential nutrient (vitamin B4) for poultry, pigs, aquaculture and ruminants, supporting fat metabolism and liver function.
- Industrial. Component of deep eutectic solvents, electroplating additive, textile and paper processing aid, and intermediate in pharmaceutical and surfactant manufacture.
Handling and storage
Choline chloride 70% is not classified as dangerous goods for transport under the ADG Code. It is a mild eye irritant: wear gloves and eye protection and rinse splashes with water. Keep containers sealed to stop water absorption and odour, store away from strong oxidisers, and keep drums and IBCs out of direct sun to limit colour development. Solutions are mildly corrosive to mild steel over time, so use HDPE, stainless steel or lined tanks. Always read the Safety Data Sheet before use.
Why buy Choline Chloride from UD Trading
Low-assay or trimethylamine-heavy product means more litres per cubic metre and complaints about odour on site. We release every lot against an approved specification for assay, free trimethylamine, pH, glycols and colour under our ISO 9001:2015 quality system, hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 67-48-1 on CAS Common Chemistry.
Choline Chloride FAQ
What strength is your choline chloride?
A 70% w/w aqueous solution with a minimum of 70% choline chloride, 300 mg/kg maximum free trimethylamine and pH 5–7.
How is it packed?
In 200 L drums (about 220 kg) and 1,000 L IBCs (about 1,100 kg), with full container loads available for scheduled supply.
How much choline chloride replaces KCl in drilling mud?
Typically 2–5% v/v, or 20–50 L of 70% liquid per m³ of mud, gives inhibition comparable to 3–7% KCl with a fraction of the chloride.
Is choline chloride dangerous goods?
No. It is not classified as dangerous goods for transport, but it is an eye irritant. Refer to the SDS.
Can the same product be used in animal feed?
Choline chloride 70% liquid is widely used in feed and premixes. Confirm with us at the time of order so we can supply the batch documentation your feed quality system requires.
Does choline chloride affect mud rheology or density?
It has a negligible effect on density and little effect on polymer viscosity at normal dosages, unlike high KCl loadings which can thin some polymers.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled IBC and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Choline Chloride
Contact us for pricing, availability and documentation for Choline Chloride. Call 07 3040 7298 or email sales@udtrading.com.au.

