Acetic Acid
UD Trading supplies acetic acid 60–80% solution (ethanoic acid, CH₃COOH, CAS 64-19-7) in 200 kg drums and IBCs to food and beverage processors, cleaning and descaling product manufacturers, textile and dye houses, water and wastewater plants, drilling contractors and industrial users across Australia who want acetic acid already in solution rather than glacial grade. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin and regional centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system. For anhydrous use see our glacial acetic acid 99.8%.
Acetic Acid at a glance
| Chemical Name | Acetic Acid |
|---|---|
| Chemical Formula | CH3COOH |
| Other Names | Ethanoic Acid, Glacial Acetic Acid, Vinegar Acid |
| CAS No | 64-19-7 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 20 L drum | About 21 kg | Trials, laboratories, workshops, small plants |
| 200 kg HDPE drum | 200 kg (about 187 L) | Food processors, cleaning-product makers, workshops |
| 1,000 L IBC | About 1,070 kg | Manufacturers, treatment plants, textile mills |
| Full container load (FCL) | About 20 IBCs or 80 drums | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Acetic Acid specification
Our dilute acetic acid is supplied at a nominated strength between 60% and 80% w/w; the exact strength is confirmed on your quote and on each batch COA, along with colour, residue, iron and heavy metals.
| Parameter | Specification |
|---|---|
| Appearance | Clear colourless liquid |
| Acetic acid (CH3COOH) | 60 – 80 % |
| Colour (APHA) | ≤ 20 |
| Non-volatile residue | ≤ 50 mg/kg |
| Iron (Fe) | ≤ 1.0 mg/kg |
| Heavy metals (as Pb) | ≤ 5 mg/kg |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 60.05 g/mol; density about 1.065–1.070 g/mL across the 60–80% range (so an IBC holds about 1,070 kg and a 200 kg drum about 187 L); a 70% solution contains about 0.75 kg of acetic acid per litre; freezing point well below 0 °C (about −7 °C at 80% and lower at 60–70%), unlike glacial acid which freezes at 16.6 °C; pKa 4.76; a weak acid, so a 5% solution has a pH of about 2.4; sharp vinegar odour; miscible with water, alcohols and glycols. Unlike glacial acid, the 60–80% solutions are not classified as flammable.
Dilute 60–80% or glacial 99.8%: which acetic acid to buy
| Property | Acetic acid 60–80% (this product) | Glacial acetic acid 99.8% |
|---|---|---|
| Acetic acid per IBC | About 640–860 kg | About 1,050 kg |
| ADG classification | UN 2790, Class 8, PG II | UN 2789, Class 8 with Class 3 flammable subsidiary risk, PG II |
| Freezing point | Below −7 °C; pumpable year-round | 16.6 °C; solidifies in cold stores and winter |
| Heat on dilution | Moderate | Higher; add to water with care |
| Best suited to | Users dosing to a working strength, cleaning and descaling blends, pH control, cold-climate sites | Chemical synthesis, esters, anhydrous formulations, users optimising freight per tonne of acid |
How much acetic acid do you need: worked examples
- Descaling calcium carbonate. 2 CH₃COOH + CaCO₃ → Ca(CH₃COO)₂ + CO₂ + H₂O, so 120 g of acetic acid dissolves 100 g of scale (1.2 kg/kg). Removing 50 kg of scale from a heat exchanger needs 60 kg of acetic acid, which is 86 kg of 70% solution, circulated as a 10% w/w working solution (about 600 kg total) and vented because 22 kg of CO₂ is released.
- Neutralising alkaline effluent. NaOH + CH₃COOH → NaCH₃COO + H₂O: 1.5 kg of acetic acid per kg of caustic soda. A 20 m³ wash-water batch containing 100 kg of residual NaOH needs 150 kg of acetic acid, about 214 kg (200 L) of 70% solution, dosed with pH control to a 6.5–8.5 discharge limit. The sodium acetate formed is biodegradable, which is why acetic acid is preferred over mineral acids where effluent goes to a biological plant.
- Making a 5% working solution. To dilute 70% acid to 5% w/w: 70 ÷ 5 = 14, so 1 kg of 70% acid makes 14 kg of 5% solution. One IBC (1,070 kg) makes about 15,000 kg of 5% solution. Always add acid to water.
- pH adjustment of process water. Dropping 100 m³ of water with 150 mg/L alkalinity (as CaCO₃) to pH 6 consumes roughly the stoichiometric 1.2 g of acetic acid per gram of alkalinity: 100 × 150 × 1.2 = 18 kg of acid, about 26 kg of 70% solution.
- Textile dyeing. Acid-dye baths run at 1–3% acetic acid on weight of fabric to hold pH 4–5. Dyeing 500 kg of wool at 2% uses 10 kg of acid, 14 kg of 70% solution.
What Acetic Acid is used for
- Cleaning, descaling and sanitising products. Limescale and mineral removers, dairy and brewery CIP acid rinses, bathroom and glass cleaners, and peracetic acid sanitiser blends with hydrogen peroxide.
- Food and beverage processing. Acidulant and preservative in pickling, sauces, dressings and bakery when a food-contact grade is specified; confirm the grade at the time of order.
- Water and wastewater treatment. pH control, alkalinity reduction and a biodegradable carbon source for denitrification.
- Textiles, leather and dyes. Dye-bath pH control, neutralising after alkaline scouring and mercerising, and leather deliming.
- Drilling and oilfield. pH adjustment, scale removal and calcium carbonate bridging-material clean-up where hydrochloric acid is too aggressive on tubulars.
- Agriculture and industry. Silage and hay preservative blends, rubber coagulation, calcium and sodium acetate production, and a solvent and reagent in chemical manufacture.
Handling and storage
Acetic acid 60–80% is dangerous goods: UN 2790, Class 8 corrosive, Packing Group II. It causes skin burns and serious eye damage and its vapour irritates the nose and throat, so wear a face shield or goggles, nitrile or PVC gloves and apron and work with good ventilation; keep an eyewash within reach. Store in the closed original container in a cool, ventilated, bunded area away from oxidisers, strong alkalis and metals, because acetic acid corrodes mild steel, zinc and aluminium; use HDPE, polypropylene or 316 stainless steel for tanks and pumps. Always read the Safety Data Sheet before use.
Why buy Acetic Acid from UD Trading
Buying glacial acid and diluting it on site means handling a flammable corrosive and a product that freezes in winter. Our 60–80% solution arrives at the strength you nominate, released against an approved specification for assay, colour, residue, iron and heavy metals under our ISO 9001:2015 quality system, with DG documentation and stock held in multiple Australian warehouses. Browse our general industrial chemicals, water treatment chemicals and drilling fluid chemicals, or contact our team for a quote. Chemical identity reference: CAS 64-19-7 on CAS Common Chemistry.
Acetic Acid FAQ
What strength is your dilute acetic acid?
Between 60% and 80% w/w, confirmed on your quote and the batch COA. The most common request is 70–80%. Glacial 99.8% is sold as a separate product.
How is it packed?
In 200 kg HDPE drums and 1,000 L IBCs (about 1,070 kg), with full container loads available for scheduled supply.
Is acetic acid 60–80% dangerous goods?
Yes. UN 2790, Class 8 corrosive, Packing Group II. It is not classified as flammable at this strength, unlike glacial acetic acid.
How much acetic acid removes limescale?
1.2 kg of acetic acid dissolves 1 kg of calcium carbonate scale, so about 1.7 kg of 70% solution per kg of scale, used as a 5–10% working solution.
Why use acetic acid instead of hydrochloric acid for pH control?
It is a weak acid, so overshooting pH is harder, it is far less corrosive to stainless steel and tubulars, and the acetate formed is biodegradable and harmless to biological treatment plants.
Is it food grade?
Food-grade acetic acid is available on request. Tell us the application when you enquire so the correct grade and documentation are supplied.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled drum, IBC and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Acetic Acid
First, contact us for pricing, availability and documentation for Acetic Acid. Alternatively, call 07 3040 7298 or email sales@udtrading.com.au.

