UD Trading Pty Ltd company logo

Oxalic Acid

UD Trading supplies oxalic acid dihydrate (ethanedioic acid, H₂C₂O₄·2H₂O, CAS 6153-56-6) at 99.6% minimum purity as white crystals to cleaning-product manufacturers, timber and deck restorers, stone and marble polishers, metal finishers and radiator services, mines and rare-earth processors, textile and leather processors, laboratories and chemical manufacturers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Kalgoorlie and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Oxalic Acid at a glance

Chemical NameOxalic Acid
Other NamesEthanedioic acid dihydrate, Oxalic acid
CAS No6153-56-6

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag with PE liner25 kg (40 per pallet)Cleaning manufacturers, restorers, workshops, laboratories
Pallet of 25 kg bags, shrink-wrapped1,000 kgDistributors, textile mills, metal finishers
Bulk bag (FIBC)1,000 kgRare-earth and mineral processors
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Oxalic Acid specification

Oxalic acid is specified on purity, sulphate, chloride, iron and heavy metals. Low iron matters because the product is used to remove iron stains; low chloride and sulphate matter for rare-earth precipitation and electronic-grade cleaning.

ParameterSpecification
AppearanceWhite crystals
Oxalic acid dihydrate≥ 99.6 %
Sulphate≤ 0.01 %
Chloride≤ 0.005 %
Iron (Fe)≤ 5 mg/kg
Heavy metals (as Pb)≤ 10 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 126.07 g/mol as the dihydrate (71.4% anhydrous acid); solubility 9.5 g per 100 g water at 20 °C (95 g/L) rising to about 120 g at 90 °C, so hot solutions are far more concentrated; pKa 1.25 and 4.14, making it the strongest of the common organic acids; a 1% solution has pH about 1.3; melts at 101 °C and sublimes above 150 °C; it reduces iron(III) to soluble iron(II) oxalate complexes, which is the chemistry behind rust and stain removal; calcium oxalate is almost insoluble, so it also precipitates calcium and rare earths.

Oxalic, citric or hydrochloric acid: which to buy for rust and stains

PropertyOxalic acid (this product)Citric acidHydrochloric acid 32%
Rust and iron-stain removalFastest; reduces and chelates iron; bleaches tannin stainsSlower; chelates onlyFast but attacks the metal and fumes
Effect on timber, stone, concreteBrightens timber; safe on marble at low strengthSafe, mildEtches stone and concrete
ToxicityToxic if swallowed, corrosiveFood gradeCorrosive, fuming
Dangerous goodsUN 3261, Class 8, PG IIINot DGUN 1789, Class 8, PG II
See alsocitric acidhydrochloric acid

How much oxalic acid do you need: worked examples

  • Rust and iron-stain remover. 5–10% w/v: 50–100 g per litre of warm water. A 1,000 L dip tank at 8% uses 80 kg; a 200 L deck-cleaning batch at 5% uses 10 kg. Stoichiometrically 1 kg of dihydrate dissolves about 0.21 kg of rust (Fe₂O₃), but allow double for mixed scale.
  • Timber brightening and deck restoration. 50–100 g/L applied hot after an alkaline stripper, rinsed thoroughly; 100 m² of decking at 0.25 L/m² of 8% solution uses 25 L and 2 kg of acid.
  • Marble and terrazzo polishing. 2–5% solution or oxalic-based polishing powder; a 20 L polishing batch at 3% uses 600 g.
  • Rare-earth precipitation. Rare earths are recovered from leach liquors as oxalates: 2 RE³⁺ + 3 H₂C₂O₄ → RE₂(C₂O₄)₃ + 6 H⁺. About 1.2 kg of oxalic acid dihydrate per kg of rare-earth oxide is stoichiometric, with 1.3–1.5 kg used in practice; a plant precipitating 5 t/day of REO uses 6.5–7.5 t a day of oxalic acid.
  • Neutralising spent solution. 1 kg of dihydrate is neutralised by 0.63 kg of caustic soda or 0.65 kg of 90% hydrated lime; lime precipitates the oxalate as insoluble calcium oxalate for disposal.

What Oxalic Acid is used for

  • Cleaning products. Rust, iron and tannin stain removers, radiator and cooling-system flushes, boat-hull and bathroom cleaners, with our cleaning chemicals.
  • Timber, stone and construction. Deck and timber brighteners, marble and terrazzo polishing, concrete rust-stain removal.
  • Mining and metallurgy. Rare-earth, scandium and niobium precipitation, metal polishing and passivation, alongside our mining chemicals.
  • Textiles and leather. Bleaching, iron-stain stripping, dye reduction and chrome leather processing.
  • Chemical and laboratory. Reducing agent, oxalate manufacture, analytical standard and wastewater nickel and calcium precipitation.

Handling and storage

Oxalic acid is toxic if swallowed or absorbed through skin and is corrosive to eyes; it is classified as dangerous goods for transport: UN 3261, Class 8, Packing Group III. Wear goggles, nitrile gloves and a dust mask, avoid skin contact with solutions, and never use it on food-contact surfaces without thorough rinsing. Store bags sealed, dry and away from alkalis, oxidisers, silver and mercury compounds, and out of reach of children and animals. Always read the Safety Data Sheet before use.

Why buy Oxalic Acid from UD Trading

Every batch is released against our specification for purity, sulphate, chloride, iron and heavy metals under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses. Browse our cleaning chemicals, mining chemicals and general industrial chemicals, or contact our team for a quote. Related acids: citric acid, tartaric acid. Chemical identity reference: CAS 6153-56-6 on CAS Common Chemistry.

Oxalic Acid FAQ

What grade is your oxalic acid?

Dihydrate at 99.6% minimum, iron ≤ 5 mg/kg, chloride ≤ 0.005%, heavy metals ≤ 10 mg/kg, reported on the batch COA.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.

What strength removes rust?

5–10% in warm water, 50–100 g per litre, with 10–30 minutes of contact and a thorough rinse.

Is oxalic acid dangerous goods?

Yes. UN 3261, Class 8 corrosive solid, Packing Group III, and it is toxic if swallowed. We ship with the correct DG documentation and SDS.

Is it safe on stainless steel and aluminium?

Yes at cleaning strengths; it passivates stainless and is much gentler on aluminium than hydrochloric acid. Rinse and dry afterwards.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you deliver to mine sites and regional plants?

Yes. We deliver Australia-wide by DG-licensed road and rail freight, with freight quoted per consignment.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet, bulk-bag and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Oxalic Acid

Contact us for pricing, availability and documentation for Oxalic Acid. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia