Methanol
UD Trading supplies methanol (methyl alcohol, CH₃OH, CAS 67-56-1) at 99.85% minimum purity in IBCs and bulk to oil and gas producers and well-service companies, wastewater treatment plants, biodiesel producers, chemical, resin and formaldehyde manufacturers, laboratories, fuel blenders and industrial solvent users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Dampier, Darwin, Sydney, Melbourne, Adelaide and regional centres, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Methanol at a glance
| Chemical Name | Methanol |
|---|---|
| Chemical Formula | CH3OH |
| Other Names | Methyl Alcohol, Wood Alcohol, Carbinol |
| CAS No | 67-56-1 |
Pack sizes and how to order
| Pack | Net quantity | Typical buyer |
|---|---|---|
| 20 L drum | About 16 kg | Trials, laboratories, workshops, small plants |
| Steel or UN-rated HDPE drum | 200 L (about 158 kg) | Laboratories, workshops, small blenders |
| IBC (UN-rated, earthed) | 1,000 L (about 792 kg) | Well-service crews, wastewater plants, biodiesel plants |
| Scheduled contract supply | Monthly volumes | Sites with bulk storage |
Pricing is quoted per order, delivered, usually within one business day of your enquiry; methanol prices track natural gas and freight markets, so quotes are held for a stated period. Contract pricing is available for scheduled volumes. Lead time depends on quantity: IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Methanol specification
Methanol is specified on purity, water, ethanol, acetone, colour and distillation range. Low water matters for hydrate inhibition and biodiesel; low acetone and ethanol matter for formaldehyde and pharmaceutical use.
| Parameter | Specification |
|---|---|
| Appearance | Clear colourless liquid |
| Methanol purity | ≥ 99.85 % |
| Water | ≤ 0.10 % |
| Ethanol | ≤ 50 mg/kg |
| Acetone | ≤ 30 mg/kg |
| Colour (APHA) | ≤ 5 |
| Distillation range | 64.0 – 65.5 °C |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 32.04 g/mol; density 0.792 kg/L at 20 °C; boiling point 64.7 °C; freezing point −97.6 °C; flash point 11 °C (closed cup); autoignition 464 °C; flammable range 6–36% in air; fully miscible with water; burns with a nearly invisible flame in daylight; toxic by ingestion, inhalation and skin absorption, with a lethal adult dose as low as 30 mL; vapour density 1.1, so vapours collect at low points.
Methanol or MEG: which hydrate inhibitor to buy
| Property | Methanol (this product) | MEG |
|---|---|---|
| Mass needed for the same hydrate suppression | About half (K = 1,297, M = 32) | Baseline (K = 2,335, M = 62) |
| Loss to the gas and condensate phases | High; 10–30% is not recovered | Very low; regenerated and reused |
| Flammability and DG | Flammable, toxic: UN 1230, Class 3 (6.1), PG II | Combustible only, not DG |
| Storage and injection | Explosion-proof pumps, earthed tanks, nitrogen blanket | Standard pumps and tanks |
| Best suited to | Wellhead and intermittent injection, start-ups, pipeline dewatering, remote sites without regeneration | Continuous subsea and pipeline inhibition with reclamation; see MEG |
How much methanol do you need: worked examples
- Hydrate inhibition (Hammerschmidt). Hydrate temperature depression ΔT (°C) ≈ 1,297 × W ÷ [32 × (100 − W)], where W is the methanol weight percent in the aqueous phase. For 10 °C of suppression W ≈ 20%; for 15 °C about 27%. A well producing 20 m³/day of water needs 0.20 ÷ 0.80 × 20,000 kg = 5,000 kg (6.3 kL) a day in the water phase, plus 20–30% more for losses to gas and condensate, so plan on about 8 kL a day, eight IBCs.
- Wastewater denitrification. Heterotrophic denitrification needs about 2.47 kg of methanol per kg of nitrate-nitrogen removed, plus 0.87 kg per kg of dissolved oxygen, typically 3 kg/kg in practice. Removing 20 mg/L of NO₃-N from 5 ML/day (100 kg N a day) takes about 300 kg, 380 L, of methanol a day, one IBC every two days.
- Biodiesel transesterification. The reaction needs 3 moles of methanol per mole of triglyceride; plants run a 6:1 ratio, about 20–22% by mass of oil, and recover the excess. A 1,000 kg batch of oil uses 200–220 kg (250–280 L) of methanol with 10–15 kg of potassium hydroxide or caustic soda catalyst.
- Pipeline dewatering and freeze protection. A 20% methanol-water mixture freezes at about −15 °C and 40% at about −40 °C; a 50 m³ low-point slug for a pipeline hydrotest in a cold region at 30% needs 15 m³ of methanol.
- Formaldehyde and chemical feedstock. Oxidation to formaldehyde consumes about 0.43–0.45 t of methanol per tonne of 37% formalin; a 10 t/day formalin unit uses about 4.5 t, 5.7 kL, a day.
What Methanol is used for
- Oil and gas. Hydrate inhibitor at wellheads, flowlines and gas plants, pipeline dewatering, and glycol and amine make-up, alongside our oilfield chemicals.
- Wastewater treatment. Carbon source for biological nitrogen removal and anoxic zones.
- Energy. Biodiesel reagent, fuel-cell and racing fuel, and methanol-to-hydrogen feed.
- Chemical manufacture. Formaldehyde, acetic acid, MTBE, methylamines, resins and pharmaceuticals.
- Solvent and cleaning. Paint, ink and lacquer solvent, windscreen washer, laboratory and electronics cleaning.
Handling and storage
Methanol is highly flammable and toxic, classified as dangerous goods for transport: UN 1230, Class 3 with subsidiary risk 6.1, Packing Group II. Store in earthed, bunded, UN-rated containers or tanks away from heat, sparks and oxidisers, with flameproof pumps and ventilation; vapours are heavier than air. Wear nitrile gloves, goggles and, where vapour is likely, an organic-vapour respirator; it is absorbed through skin and must never be siphoned by mouth. Keep away from drinking water, food and animals. Always read the Safety Data Sheet before use.
Why buy Methanol from UD Trading
Every batch is released against our specification for purity, water, ethanol, acetone and colour under our ISO 9001:2015 quality system, we ship as Class 3 dangerous goods with correct documentation and placarding, and we hold stock in multiple Australian warehouses close to the main drilling supply bases. Browse our oil and gas chemicals, water treatment chemicals and general industrial chemicals, or contact our team for a quote. Related products: MEG, glacial acetic acid. Chemical identity reference: CAS 67-56-1 on CAS Common Chemistry.
Methanol FAQ
What grade is your methanol?
99.85% minimum purity with water ≤ 0.10%, ethanol ≤ 50 mg/kg, acetone ≤ 30 mg/kg and colour ≤ 5 APHA, reported on the batch COA.
What pack sizes do you supply?
1,000 L UN-rated IBCs as standard, 200 L drums, and 20 L drums.
Is methanol dangerous goods?
Yes. UN 1230, Class 3 flammable liquid with subsidiary risk 6.1 (toxic), Packing Group II. We ship with the correct DG documentation, placarding and SDS.
How much methanol do I need to stop hydrates?
About 20% methanol in the produced water gives 10 °C of suppression; allow another 20–30% for losses to the gas phase. We can run the numbers for your water rate and pressure.
Can I use it as a denitrification carbon source?
Yes. Dose about 3 kg of methanol per kg of nitrate-nitrogen removed, adjusted by effluent nitrate monitoring.
What is the lead time?
IBC orders are dispatched from our warehouses across Australia; bulk volumes are scheduled to order; full container loads typically take 30 to 60 days.
Do you deliver to gas fields and remote sites?
Yes. We deliver Australia-wide by DG-licensed road and rail freight, including Roma, Moomba, Dampier and Darwin, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled IBC and bulk volumes.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Methanol
Contact us for pricing, availability and documentation for Methanol. Call 07 3040 7298 or email sales@udtrading.com.au.

