Polyanionic Cellulose PAC-HV
UD Trading supplies polyanionic cellulose PAC-HV (high-viscosity PAC, CAS 9004-32-4), an API 13A polymer that gives viscosity and fluid-loss control from one sack, to drilling fluid companies, drilling contractors, HDD and water-bore drillers and mineral explorers across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Roma, Moomba, Perth, Port Hedland, Dampier, Darwin and regional drilling centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system. Not to be confused with poly aluminium chloride, the water-treatment coagulant we supply as PAC coagulant.
PAC-HV at a glance
| Chemical Name | Polyanionic Cellulose – High Viscosity |
|---|---|
| Other Names | PAC-HV, PAC HV, PAC-R, high-viscosity PAC, drilling-grade polyanionic cellulose |
| CAS No | 9004-32-4 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg multi-wall bag with PE liner | 25 kg (40 per pallet) | Rig sites, HDD crews, water-bore and exploration drillers |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Mud plants, drilling contractors, distributors |
| Bulk bag (FIBC, jumbo bag) | 1,000 kg | Plants, mines, contractors, scheduled supply |
| Full container load (FCL) | 16–20 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry, including delivered rates to drilling supply bases. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
PAC-HV specification
PAC-HV is tested to API 13A methods: apparent viscosity and filtrate volume in the standard salt-water test fluid, moisture, and absence of starch. The viscosity minimum is what separates PAC-HV from PAC-LV; the filtrate limit confirms it still seals.
| Parameter | Specification |
|---|---|
| Appearance | White to off-white free-flowing powder |
| Moisture | ≤ 10.0 % |
| Starch and starch derivatives | Absent |
| Apparent viscosity (600 r/min, API 13A test fluid) | ≥ 50 cP |
| Filtrate volume (API 13A test fluid) | ≤ 23 mL |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: high-molecular-weight sodium carboxymethyl cellulose with a degree of substitution of at least 0.9; bulk density about 0.5–0.7 g/mL; dissolves in fresh water and brines to saturation; shear-thinning, so it thickens at low shear for hole cleaning but pumps easily; thermally stable to about 150 °C; pH of a 1% solution 6.5–8.0; encapsulates cuttings and reactive shale; biodegradable and non-toxic.
PAC-HV, PAC-LV or xanthan: which to buy
| Property | PAC-HV (this product) | PAC-LV | Xanthan gum |
|---|---|---|---|
| Main job | Viscosity plus fluid-loss control | Fluid-loss control with minimal viscosity | Low-shear suspension and gel strength |
| API viscosity (test fluid) | ≥ 50 cP | ≤ 40 cP | Not applicable |
| Salt and calcium tolerance | High | High | Excellent |
| Temperature limit | About 150 °C | About 150 °C | About 120 °C |
| Typical dose | 1–4 kg/m³ | 2–6 kg/m³ | 1–3 kg/m³ |
| See also | PAC-LV | xanthan gum |
How much PAC-HV do you need: worked examples
- Low-solids polymer mud for water bores and exploration. 2–3 kg/m³ PAC-HV with 10–15 kg/m³ prehydrated bentonite. A 20 m³ pit at 2.5 kg/m³ takes 50 kg, two bags, and typically gives a Marsh funnel of 45–60 s and API filtrate under 10 mL.
- Raising viscosity on a running hole. Each 1 kg/m³ of PAC-HV adds roughly 5–10 cP to plastic viscosity and 2–5 Pa to yield point in a fresh-water bentonite mud. Lifting a 100 m³ system by 2 kg/m³ takes 200 kg, eight bags, added over two circulations.
- HDD in sand and gravel. 1–2 kg/m³ PAC-HV with 40–60 kg/m³ bentonite; a 10,000 L mixing tank at 1.5 kg/m³ takes 15 kg.
- Salt and KCl muds. 2–4 kg/m³ in KCl or sodium chloride brines where bentonite yields poorly; a 100 m³ 5% KCl system at 3 kg/m³ uses 300 kg, often with 1–2 kg/m³ of PAC-LV for extra sealing.
- Mixing. Add through a venturi hopper at no more than one 25 kg bag every 3–5 minutes into fast-moving fluid; allow 30 minutes to hydrate before adjusting further.
What PAC-HV is used for
- Water-based drilling fluids. Viscosity, hole cleaning and fluid-loss control in fresh-water, KCl, NaCl and saturated-salt muds, alongside our drilling fluid chemicals.
- HDD and trenchless. Carrying capacity and bore stability in coarse ground.
- Mineral exploration and water bores. Low-solids polymer systems with fast hydration.
- Workover and completion. Viscous pills and sweeps in brine.
- Other industries. Thickener in detergents, ceramics, paints and construction products.
Handling and storage
PAC-HV is not classified as dangerous goods for transport and is not hazardous to handle, but the powder is a dust and slip hazard: clean spills dry and use a dust mask when tipping bags. Store sealed, dry and off the ground; moisture above the 10% limit causes caking and slower hydration. Always read the Safety Data Sheet before use.
Why buy PAC-HV from UD Trading
Every batch is released against the API 13A viscosity and filtrate limits under our ISO 9001:2015 quality system, we hold stock in multiple Australian warehouses, and we are a member of the Australian Drilling Industry Association (ADIA). Browse our drilling fluid chemicals and mining chemicals, or contact our team for a quote. Chemical identity reference: CAS 9004-32-4 on CAS Common Chemistry.
PAC-HV FAQ
Is your PAC-HV API grade?
Yes. It is tested to API 13A: apparent viscosity ≥ 50 cP in the standard test fluid, moisture ≤ 10%, starch absent, with filtrate reported on the batch COA.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.
How much PAC-HV per cubic metre?
1–4 kg/m³ depending on the viscosity target; 50 kg for a 20 m³ exploration pit at 2.5 kg/m³.
Is PAC-HV dangerous goods?
No. It is not classified as dangerous goods for transport. Keep spills dry because wet polymer is slippery.
PAC-HV or PAC-LV?
PAC-HV when you want viscosity and hole cleaning as well as fluid-loss control; PAC-LV when viscosity must stay low. Many systems run both.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver to drilling supply bases?
Yes. We deliver Australia-wide by road and rail freight, including Roma, Moomba, Port Hedland, Dampier and Darwin, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Polyanionic Cellulose PAC-HV
Contact us for pricing, availability and documentation for Polyanionic Cellulose PAC-HV. Call 07 3040 7298 or email sales@udtrading.com.au.

