Activated Carbon
UD Trading supplies activated carbon (CAS 7440-44-0) with an iodine number of at least 900 mg/g, as granular (GAC) or powdered (PAC) grades, to water utilities, pool and spa suppliers, food and beverage processors, gold processing plants, chemical manufacturers and air-treatment users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin, Kalgoorlie and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Activated Carbon at a glance
| Chemical Name | Activated Carbon |
|---|---|
| Chemical Formula | C (primarily carbon) |
| Other Names | Activated Charcoal, Activated Coal |
| CAS No | 7440-44-0 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag | 25 kg (40 per pallet) | Pool shops, breweries, small water plants, filter services |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Water utilities, food processors, distributors |
| Bulk bag (FIBC) | 500–1,000 kg | Filter bed changeouts, gold plants |
| Full container load (FCL) | 16–20 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Activated Carbon specification
Activated carbon is specified on iodine number (adsorption capacity), moisture, ash, hardness and pH; particle size is confirmed per grade on the COA.
| Parameter | Specification |
|---|---|
| Appearance | Black granules / powder |
| Iodine number (ASTM D4607) | ≥ 900 mg/g |
| Moisture | ≤ 5 % |
| Ash | ≤ 12 % |
| Hardness (ASTM D3802) | ≥ 95 % |
| Particle size (mesh) | As per grade |
| pH | 6 – 10 |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: iodine number 900 mg/g corresponds to an internal surface area of roughly 900–1,000 m²/g; apparent (bulk) density about 450–520 kg/m³ for granular grades and 350–450 kg/m³ for powder; pore volume 0.8–1.0 mL/g; typical granular sizes 8×30 mesh (0.6–2.4 mm) and 12×40 mesh (0.4–1.7 mm); powdered grade 90% passing 325 mesh (45 µm).
Granular or powdered: which grade to buy
| Property | Granular (GAC) 8×30 or 12×40 | Powdered (PAC) 325 mesh |
|---|---|---|
| How it is used | Fixed filter beds, cartridges, columns; regenerable | Dosed as a slurry, removed by clarification or filtration; single use |
| Contact time | Empty-bed contact time 10–20 minutes | 15–60 minutes mixing |
| Best suited to | Continuous dechlorination, taste and odour, TOC, gold adsorption, air and solvent recovery | Seasonal algal taste and odour, pesticide spikes, decolourising sugar, juice, wine and chemicals |
| Hardness requirement | ≥ 95% to survive backwashing | Not critical |
How much activated carbon do you need: worked examples
- PAC dosing for taste and odour. Typical dose 5–20 mg/L. A 10 ML/day water treatment plant at 10 mg/L uses 10,000 m³ × 10 g/m³ = 100 kg/day, four bags a day or 3 t a month; at a 25 mg/L event dose it is 250 kg/day.
- Sizing a GAC filter bed. Bed volume = flow × empty-bed contact time. For 50 m³/h and a 12-minute EBCT the bed is 50 × 12 ÷ 60 = 10 m³; at 480 kg/m³ bulk density that is 4.8 t of carbon, about 192 bags. A 2.4 m diameter vessel (4.5 m² area) gives a 2.2 m bed depth and a surface loading of 11 m/h, inside the usual 5–15 m/h range.
- Dechlorination. Free chlorine is reduced on the carbon surface: C* + 2 Cl₂ + 2 H₂O → 4 HCl + CO₂. A 20 m³/h feed at 2 mg/L chlorine loads 40 g of chlorine an hour; a 10-minute EBCT bed (3.3 m³, 1.6 t) will typically run 12–24 months before chlorine breakthrough. Pair with sodium hypochlorite dosing upstream and sodium bicarbonate for alkalinity.
- Decolourising a food or chemical solution. 0.1–1% w/w of PAC on the liquid, 30–60 minutes at 60–80 °C, then filter. A 5,000 L batch at 0.5% needs 25 kg, one bag.
What Activated Carbon is used for
- Drinking water treatment. Removes taste, odour, colour, algal metabolites (geosmin, MIB), pesticides and disinfection by-product precursors.
- Dechlorination and process water. Protects reverse-osmosis membranes and ion-exchange resins from free chlorine; polishes boiler feed and rinse water.
- Pool, spa and aquaculture. Removes chloramines, odour and organics in backwash and recirculation systems.
- Food, beverage and chemical. Decolourising and purifying sugar syrups, juices, glycerine, edible oils, pharmaceuticals and fine chemicals.
- Mining. Gold adsorption in CIP and CIL circuits alongside our mining reagents; coconut-shell 6×12 grades on request.
- Air and gas. Odour control, solvent recovery, biogas and vent-gas treatment.
Handling and storage
Activated carbon is not classified as dangerous goods for transport under the ADG Code when it meets the self-heating test; our grades are shipped as non-DG. Wet carbon depletes oxygen in closed vessels and silos: ventilate and test before entry. Keep bags dry and away from hydrocarbons and oxidisers, because carbon adsorbs them and can heat. Use a P2 dust mask when handling powder. Always read the Safety Data Sheet before use.
Why buy Activated Carbon from UD Trading
Carbon that misses its iodine number or hardness costs you early breakthrough and fines in the filtrate. We release every lot against ASTM test methods under our ISO 9001:2015 quality system and hold stock in multiple Australian warehouses. Browse our water treatment chemicals and general industrial chemicals, or contact our team for a quote. Related products: poly aluminium chloride, aluminium sulphate. Chemical identity reference: CAS 7440-44-0 on CAS Common Chemistry.
Activated Carbon FAQ
What iodine number is your activated carbon?
At least 900 mg/g by ASTM D4607, with hardness ≥ 95% (ASTM D3802), ash ≤ 12% and moisture ≤ 5%, reported on the batch COA.
Which grades and sizes do you supply?
Granular 8×30 and 12×40 mesh and powdered 325 mesh as standard; other sizes and coconut-shell grades on request.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.
How much carbon do I need for a filter bed?
Bed volume equals flow multiplied by empty-bed contact time, usually 10–20 minutes; multiply by about 480 kg/m³ for the mass. We can check your vessel sizing with the quote.
Is activated carbon dangerous goods?
No. Our grades are shipped as non-dangerous goods. Wet carbon removes oxygen from confined spaces, so ventilate silos and vessels before entry.
Can spent carbon be regenerated?
Granular carbon can be thermally reactivated by specialist facilities; powdered carbon is single use and is removed with the sludge.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Activated Carbon
Contact us for pricing, availability and documentation for Activated Carbon. Call 07 3040 7298 or email sales@udtrading.com.au.

