UD Trading Pty Ltd company logo

Hydrogen Peroxide 50%

UD Trading supplies hydrogen peroxide 50% (H₂O₂, CAS 7722-84-1), a stabilised, clear, colourless high-strength solution, in vented IBCs and drums to gold and base-metal mines, pulp and paper mills, water and wastewater treatment plants, textile and chemical processors and industrial users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Perth, Kalgoorlie, Townsville, Melbourne, Adelaide, Darwin and regional centres, and every batch ships with a Certificate of Analysis under our ISO 9001:2015 quality system. A 35% grade is also available.

Hydrogen Peroxide 50% at a glance

Chemical NameHydrogen Peroxide 50% (aqueous solution, stabilised)
Chemical FormulaH2O2
Other NamesHydrogen peroxide 50% solution, Dihydrogen Dioxide, Peroxide
CAS No7722-84-1

Pack sizes and how to order

PackNet weightTypical buyer
20 L drumAbout 24 kgTrials, laboratories, workshops, small plants
200 L vented HDPE drumAbout 240 kgWorkshops, small treatment plants, laboratories
1,000 L vented IBCAbout 1,190 kgMines, mills, water-treatment plants
Full container load (FCL)About 18–20 IBCsScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Hydrogen Peroxide 50% specification

Our 50% grade is tested for assay, stability, organic carbon, residue and acidity on every batch, because stability and purity decide how much active oxygen is still in the IBC when you use it.

ParameterSpecification
AppearanceClear colourless liquid
Hydrogen peroxide (H2O2)49.5 – 50.5 %
Stability (retention)≥ 90 %
Total organic carbon (TOC)≤ 300 mg/kg
Non-volatile residue≤ 60 mg/kg
Acidity (as H2SO4)≤ 0.4 g/L

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 34.01 g/mol; density of the 50% solution 1.195 g/mL at 20 °C, so one litre contains about 0.60 kg of H₂O₂ and one IBC about 600 kg; active oxygen content 23.5% w/w; freezing point about −52 °C; boiling point 114 °C; pH 1–3 as supplied (stabilised slightly acidic). Decomposition 2 H₂O₂ → 2 H₂O + O₂ releases 98 kJ per mole of peroxide and about 200 L of oxygen gas (at 0 °C) per litre of 50% solution, which is why containers must be vented and never sealed or contaminated. Standard redox potential 1.78 V in acid, making it a stronger oxidant than chlorine or permanganate.

50% or 35%: which strength to buy

PropertyHydrogen peroxide 50% (this product)Hydrogen peroxide 35%
H₂O₂ per IBCAbout 600 kgAbout 400 kg
Density1.195 g/mL1.13 g/mL
IBCs per tonne of H₂O₂1.72.5
Freight and handling per tonne of H₂O₂BaselineAbout 50% more IBCs to move and store
ADG classificationUN 2014, Class 5.1 (8), PG IIUN 2014, Class 5.1 (8), PG II
Best suited toMines, mills and plants using over 1 t a month; remote sites where freight dominatesSmaller users, dilution to working strengths, where handling policy limits strength

How much hydrogen peroxide do you need: worked examples

  • Cyanide destruction in gold tailings. H₂O₂ + CN⁻ → OCN⁻ + H₂O with a copper catalyst. Stoichiometry is 34 g of H₂O₂ per 26 g of cyanide (1.3 kg/kg), but plants run 2–4 kg of H₂O₂ per kg of weak-acid-dissociable cyanide. A 500 m³/h tailings stream at 200 mg/L CN carries 100 kg CN/h; at 3 kg/kg that is 300 kg H₂O₂/h, or 600 kg (500 L) of 50% peroxide per hour, about 12 IBCs a day.
  • Sulphide and odour control in wastewater. In acid to neutral water H₂O₂ + H₂S → S + 2 H₂O, so 1 kg of H₂O₂ oxidises 1 kg of H₂S; practical dose 1.5–2 kg/kg. A 2,000 m³/day flow at 50 mg/L sulphide holds 100 kg/day and needs 150–200 kg of H₂O₂, or 300–400 kg (250–335 L) of 50% solution per day.
  • Diluting 50% to 35%. One IBC (1,000 L, 1,195 kg) holds 597 kg of H₂O₂. To make 35% w/w the solution must weigh 597 ÷ 0.35 = 1,706 kg, so add 511 kg (511 L) of clean demineralised water, giving about 1,510 L of 35% solution. Always add peroxide to water in clean passivated vessels; never return diluted product to the original container.
  • Fenton oxidation of refractory organics. Typical ratio 5:1 H₂O₂:Fe²⁺ by mass at pH 3–4, with about 2–3 kg of H₂O₂ per kg of COD removed. Treating 500 m³ at 800 mg/L COD (400 kg) needs about 1,000 kg of H₂O₂, or 2,000 kg (1,675 L) of 50% solution, with 200 kg of iron as ferrous sulphate equivalent.
  • Pulp bleaching. Peroxide stages run 1–3% H₂O₂ on oven-dry pulp with caustic soda and sodium silicate. A 300 t/day mill at 2% uses 6 t of H₂O₂, 12 t of 50% solution, a day.

What Hydrogen Peroxide 50% is used for

  • Mining and metallurgy. Cyanide detoxification of tailings, oxygen supply to gold leach circuits, uranium and copper oxidation, and treatment of acid mine drainage with hydrated lime.
  • Water and wastewater. Sulphide, odour and iron oxidation, dechlorination, Fenton and UV/peroxide advanced oxidation, and biofilm control in cooling water.
  • Pulp, paper and textiles. Chlorine-free bleaching of pulp, recycled fibre, cotton and wool.
  • Chemical manufacture. Epoxidation, peracetic acid production with glacial acetic acid, percarbonate and perborate bleaches.
  • Food, beverage and aseptic packaging. Sterilant for packaging lines and process equipment where a food-contact grade is specified.
  • Environmental remediation. In-situ chemical oxidation of hydrocarbon-contaminated soil and groundwater.

Handling and storage

Hydrogen peroxide 50% is dangerous goods: UN 2014, Class 5.1 oxidiser with Class 8 corrosive subsidiary risk, Packing Group II, and a Schedule 6 poison. It causes severe eye damage and skin burns and will ignite organic materials such as paper, rags, wood and oil on contact. Wear a face shield, PVC or nitrile gloves and apron, and keep an eyewash and deluge shower within reach. Store below 30 °C out of direct sun in the vented original container, away from acids, alkalis, metals, reducing agents and combustibles; never seal or pressurise a container, never return product to it, and keep transfer equipment dedicated and made of HDPE, 316 stainless steel or aluminium. Contaminated or rapidly decomposing product should be flooded with water. Always read the Safety Data Sheet before use.

Why buy Hydrogen Peroxide from UD Trading

Peroxide that has lost assay in storage means under-dosed cyanide destruction and exceedances at the discharge point. We release every lot against an approved specification for assay, stability, TOC, residue and acidity under our ISO 9001:2015 quality system, ship in vented UN-approved IBCs with DG documentation, and hold stock in multiple Australian warehouses. Browse our mining chemicals, water treatment chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 7722-84-1 on CAS Common Chemistry.

Hydrogen Peroxide 50% FAQ

What strength is your hydrogen peroxide?

49.5–50.5% w/w H₂O₂, stabilised, with stability retention of at least 90%, TOC of 300 mg/kg or less and non-volatile residue of 60 mg/kg or less. A 35% grade is also available.

How is it packed?

In vented 200 L drums (about 240 kg) and vented 1,000 L IBCs (about 1,190 kg), with full container loads available for scheduled supply.

Is hydrogen peroxide 50% dangerous goods?

Yes. UN 2014, Class 5.1 oxidising liquid with Class 8 subsidiary risk, Packing Group II. It ships with DG documentation and placarding, and sites need a licensed DG storage arrangement for quantities above the manifest threshold.

How much peroxide destroys cyanide?

Stoichiometry is 1.3 kg of H₂O₂ per kg of cyanide, but plants typically use 2–4 kg/kg with a copper catalyst. 100 kg of cyanide an hour therefore needs about 600 kg (500 L) of 50% peroxide an hour.

Why must the containers be vented?

Peroxide slowly decomposes to water and oxygen; a sealed container would pressurise and rupture. The vented cap lets oxygen escape while keeping contaminants out.

Can I dilute 50% to 35% on site?

Yes, with clean demineralised water in a dedicated passivated vessel: add 511 L of water to 1,000 L of 50% to get about 1,510 L of 35%. Many sites buy the 35% grade instead to avoid handling the stronger product.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled IBC and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Hydrogen Peroxide 50%

Contact us for pricing, availability and documentation for Hydrogen Peroxide 50%. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia