Sodium Metasilicate
UD Trading supplies sodium metasilicate pentahydrate (Na₂SiO₃·5H₂O, CAS 10213-79-3) with 27–30% SiO₂ and 28–30% Na₂O at a 1:1 molar ratio, as white granules and powder, to detergent and cleaning-product manufacturers, industrial and food-plant cleaning contractors, metal finishers, drilling fluid companies, water utilities, concrete and construction-product makers and textile mills across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, Sydney, Melbourne, Perth, Adelaide, Darwin and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.
Sodium Metasilicate at a glance
| Chemical Name | Sodium Metasilicate |
|---|---|
| Other Names | Sodium metasilicate pentahydrate, Disodium metasilicate pentahydrate |
| CAS No | 10213-79-3 |
Pack sizes and how to order
| Pack | Net weight | Typical buyer |
|---|---|---|
| 25 kg bag with PE liner | 25 kg (40 per pallet) | Cleaning-product makers, contract cleaners, workshops |
| Pallet of 25 kg bags, shrink-wrapped | 1,000 kg | Detergent blenders, metal finishers, distributors |
| Bulk bag (FIBC) | 1,000 kg | Large blenders and mud plants |
| Full container load (FCL) | 20–24 t | Scheduled contract supply |
Pricing is quoted per order, delivered, usually within one business day of your enquiry. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.
Sodium Metasilicate specification
Sodium metasilicate is specified on silica, sodium oxide, molar ratio and water content. The 1:1 ratio gives the highest alkalinity of the silicates and fast dissolving; the pentahydrate water content sets the dose per kilogram.
| Parameter | Specification |
|---|---|
| Appearance | White granules / powder |
| Silicon dioxide (SiO2) | 27 – 30 % |
| Sodium oxide (Na2O) | 28 – 30 % |
| SiO2:Na2O molar ratio | ~1.0 |
| Water-insoluble matter | ≤ 0.2 % |
Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.
Physical data: molar mass 212.14 g/mol (pentahydrate), 42.5% water of crystallisation; dissolves readily in water to a clear alkaline solution; a 1% solution has pH about 12.5; bulk density about 0.9–1.1 g/mL; melts in its own water of crystallisation at about 72 °C; dissolved silicate buffers strongly, saponifies fats, disperses soils, suspends removed dirt and deposits a thin silicate film that inhibits corrosion of aluminium, zinc and steel, which is why it is the builder of choice for cleaners used on mixed metals.
Metasilicate, caustic soda or soda ash: which alkali for cleaning
| Property | Sodium metasilicate (this product) | Caustic soda | Soda ash |
|---|---|---|---|
| pH of 1% solution | 12.5 | 13.3 | 11.4 |
| Effect on aluminium and zinc | Inhibits corrosion | Attacks rapidly, releases hydrogen | Mild attack |
| Soil suspension and emulsifying | Excellent | Poor without surfactants | Moderate |
| Dangerous goods | UN 3253, Class 8, PG III | UN 1823, Class 8, PG II | Not DG |
| Best suited to | Degreasers, dishwash and laundry builders, CIP, metal cleaning, silicate muds | Heavy degreasing on steel, saponification; see caustic soda | Mild alkalinity, water treatment; see soda ash |
How much sodium metasilicate do you need: worked examples
- Alkaline degreaser or CIP builder. 2–5% w/v in use solutions. A 1,000 L spray-wash tank at 3% uses 30 kg; a powdered degreaser formulation typically carries 20–40% metasilicate with 5–10% sodium bicarbonate or carbonate and 2–5% surfactant.
- Laundry and dishwash powder. 10–30% of the formulation as builder and alkalinity source. A 2,000 kg powder batch at 20% uses 400 kg, 16 bags.
- Silicate drilling fluid. Sodium silicate muds stabilise reactive shale at 30–60 kg/m³ with pH held at 11–12.5 and a monovalent salt such as potassium chloride; a 100 m³ system at 40 kg/m³ uses 4 t, four bulk bags, often supplied as liquid silicate for ease of mixing.
- Corrosion inhibition in drinking water. 8–12 mg/L of SiO₂ protects lead, copper and galvanised mains. Each 1 g of pentahydrate gives about 0.285 g of SiO₂, so 10 mg/L SiO₂ needs 35 g/m³; a 10 ML/day plant uses about 350 kg a day, 14 bags.
- Peroxide bleach stabiliser. 1–3 g/L in textile and pulp hydrogen peroxide bleaching baths to chelate iron and buffer pH; a 10,000 L bath at 2 g/L uses 20 kg with 10–20 g/L of hydrogen peroxide.
What Sodium Metasilicate is used for
- Detergents and cleaning. Builder and alkalinity source in laundry, dishwash, floor, oven and vehicle cleaners, degreasers and CIP powders, with our cleaning chemicals.
- Metal finishing. Alkaline cleaning before plating and painting, aluminium-safe degreasing and corrosion inhibition in machining fluids.
- Drilling fluids. Shale-stabilising silicate muds and cement spacers, alongside our drilling fluid chemicals.
- Water treatment. Corrosion control and iron and manganese sequestration in distribution systems.
- Construction, textiles and paper. Concrete hardeners and densifiers, soil grouting, peroxide bleach stabiliser and de-inking.
Handling and storage
Sodium metasilicate is strongly alkaline and classified as dangerous goods for transport: UN 3253, Class 8, Packing Group III. It causes severe eye damage and skin burns: wear goggles, gloves and a dust mask, and add to water with stirring. Store bags sealed, dry and off the ground; it absorbs CO₂ and moisture from air and cakes, and spilled solution dries to a hard glassy crust. Always read the Safety Data Sheet before use.
Why buy Sodium Metasilicate from UD Trading
Every batch is released against our specification for SiO₂, Na₂O, ratio and water under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses. Browse our cleaning chemicals, drilling fluid chemicals and general industrial chemicals, or contact our team for a quote. Chemical identity reference: CAS 10213-79-3 on CAS Common Chemistry.
Sodium Metasilicate FAQ
What grade is your sodium metasilicate?
Pentahydrate with 27–30% SiO₂ and 28–30% Na₂O at a 1:1 molar ratio, reported on the batch COA; anhydrous grade on request.
What pack sizes do you supply?
25 kg bags, 1,000 kg pallets of 25 kg bags, bulk bags and full container loads.
Is sodium metasilicate dangerous goods?
Yes. UN 3253, Class 8 corrosive, Packing Group III. We ship with the correct DG documentation and SDS.
Is it safe on aluminium?
Yes, at normal cleaning concentrations the silicate film inhibits aluminium corrosion, which is the main reason to use it instead of caustic soda on mixed-metal equipment.
How much do I use in a degreaser?
2–5% of the working solution, 20–50 g per litre, with a surfactant; adjust by soil load and temperature.
What is the lead time?
It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.
Do you deliver interstate?
Yes. We deliver Australia-wide by DG-licensed road and rail freight, with freight quoted per consignment.
Do you offer contract pricing for scheduled volumes?
Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.
Product Documents
Download Specification Download SDSA Certificate of Analysis (COA) is supplied with every batch.
Contact UD Trading for Sodium Metasilicate
Contact us for pricing, availability and documentation for Sodium Metasilicate. Call 07 3040 7298 or email sales@udtrading.com.au.

