UD Trading Pty Ltd company logo

Sodium Bisulphate

UD Trading supplies sodium bisulphate (sodium hydrogen sulphate, dry acid, NaHSO₄, CAS 7681-38-1) at 93% minimum as white granules to pool and spa suppliers, cleaning-product manufacturers, metal finishers, textile dyers, food processors, water-treatment plants and industrial users across Australia. Orders are dispatched from our warehouses across Australia to Brisbane, the Gold Coast, Sydney, Melbourne, Perth, Adelaide, Darwin and regional centres in 25 kg bags, with a Certificate of Analysis for every batch under our ISO 9001:2015 quality system.

Sodium Bisulphate at a glance

Chemical NameSodium Bisulphate
Chemical FormulaNaHSO4
Other NamesSodium Hydrogen Sulphate, Sodium Acid Sulphate, pH Decreaser
CAS No7681-38-1

Pack sizes and how to order

PackNet weightTypical buyer
25 kg bag with PE liner25 kg (40 per pallet)Pool shops, cleaning manufacturers, workshops
Pallet of 25 kg bags, shrink-wrapped1,000 kgPool-chemical blenders, textile mills, distributors
Bulk bag (FIBC, jumbo bag)1,000 kgPlants, mines, contractors, scheduled supply
Full container load (FCL)20–24 tScheduled contract supply

Pricing is quoted per order, delivered, usually within one business day of your enquiry; trade and pallet pricing is available for pool shops and blenders. Contract pricing is available for scheduled volumes. Lead time depends on quantity: smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; full container loads typically take 30 to 60 days. Request a quote or call +61 7 3040 7298.

Sodium Bisulphate specification

Sodium bisulphate is specified on NaHSO₄ content, pH, moisture and iron. The pH confirms acid strength; low iron keeps pool water and cleaned surfaces free of staining.

ParameterSpecification
AppearanceWhite granules
Sodium bisulphate (NaHSO4)≥ 93 %
pH (1%)1.0 – 1.4
Moisture≤ 1.0 %
Iron (Fe)≤ 20 mg/kg

Acceptance limits from UD Trading’s approved specification. Actual results for each batch are reported on the Certificate of Analysis.

Physical data: molar mass 120.06 g/mol; solubility about 28 g per 100 g water at 25 °C, rising sharply with temperature; a 1% solution has pH 1.0–1.4; one kilogram supplies 8.3 acid equivalents, the same as 0.41 kg of sulphuric acid or 0.8 L of 32% hydrochloric acid, and removes about 0.42 kg of alkalinity as CaCO₃; it is a granular, non-fuming, non-dangerous-goods way to deliver sulphuric acid; melts at 58 °C in its own water of crystallisation and is hygroscopic.

Dry acid, hydrochloric acid or citric acid: which pH reducer to buy

PropertySodium bisulphate (this product)Hydrochloric acid 32%Citric acid
Form and handlingDry granules, no fumes, easy to store and shipFuming liquid, DG Class 8Dry, food grade
Acid per kg8.3 equivalents10.2 equivalents per litre15.6 equivalents (weak acid)
Effect on pool waterAdds sulphate; no chlorideAdds chlorideChelates metals; can feed algae
Best suited toPool and spa pH and alkalinity, dry cleaner blends, retail packsBulk pH control, descaling; see hydrochloric acidDescaling, food; see citric acid

How much sodium bisulphate do you need: worked examples

  • Lowering pool pH. About 1.2 kg of sodium bisulphate per 50,000 L lowers pH by roughly 0.2 at normal alkalinity (80–120 mg/L). Pre-dissolve in a bucket of water, pour around the pool with the pump running and retest after 4 hours; never add dry granules directly to a vinyl or fibreglass surface.
  • Lowering total alkalinity. Each 1 kg removes about 0.42 kg of alkalinity as CaCO₃. To drop alkalinity by 20 mg/L in a 50,000 L pool: 50 m³ × 20 g/m³ = 1 kg of alkalinity, which needs 2.4 kg of product, dosed in stages. Rebuild alkalinity afterwards with sodium bicarbonate.
  • Acidic cleaner formulation. Toilet-bowl, tile and descaling powders use 20–60% sodium bisulphate with surfactant and filler; a 1,000 kg powder batch at 40% uses 400 kg, 16 bags. A 2% use solution (20 g/L) dissolves about 8 g/L of carbonate scale.
  • Metal cleaning and pickling. 5–10% solutions at 40–60 °C brighten aluminium and remove rust and smut from steel; a 2,000 L tank at 8% uses 160 kg.
  • Textile dyeing. 1–3 g/L to set pH 3–4 in acid-dye and wool baths; a 5,000 L bath at 2 g/L uses 10 kg.

What Sodium Bisulphate is used for

  • Pools and spas. Dry acid for pH and total alkalinity reduction, cell and filter cleaning; pairs with pool salt, cyanuric acid and sodium hypochlorite.
  • Cleaning products. Acidic powders and tablets for toilets, tiles, dairies and descaling, with our cleaning chemicals.
  • Metal finishing. Pickling, brightening, chrome-bath pH control and smut removal.
  • Food and feed. Acidity regulator (E514), pet-food and poultry-litter acidifier where permitted.
  • Water treatment and textiles. pH reduction without chloride, dye-bath acidification and wool carbonising.

Handling and storage

Sodium bisulphate is corrosive to eyes and irritating to skin and is classified as dangerous goods for transport: UN 1821, Class 8, Packing Group II. Wear goggles, gloves and a dust mask, add to water with stirring and never mix with hypochlorite or chlorine products, which release chlorine gas. Store bags sealed, dry and off the ground away from alkalis and oxidisers; the granules cake and the solution corrodes mild steel and concrete. Always read the Safety Data Sheet before use.

Why buy Sodium Bisulphate from UD Trading

Every batch is released against our specification for NaHSO₄, pH, moisture and iron under our ISO 9001:2015 quality system, we ship as Class 8 dangerous goods with correct documentation, and we hold stock in multiple Australian warehouses for pallet orders through the swimming season. Browse our cleaning chemicals and water treatment chemicals, or contact our team for a quote. Chemical identity reference: CAS 7681-38-1 on CAS Common Chemistry.

Sodium Bisulphate FAQ

What grade is your sodium bisulphate?

Granular at 93% NaHSO₄ minimum, pH 1.0–1.4 at 1%, moisture ≤ 1%, iron ≤ 20 mg/kg, reported on the batch COA.

What pack sizes do you supply?

25 kg bags, 1,000 kg pallets of 25 kg bags and full container loads.

How much lowers my pool pH?

About 1.2 kg per 50,000 L for a 0.2 drop at normal alkalinity; add in stages and retest.

Is sodium bisulphate dangerous goods?

Yes. UN 1821, Class 8 corrosive solid, Packing Group II. We ship with the correct DG documentation and SDS.

Is it the same as sodium bisulphite?

No. Sodium bisulphate (NaHSO₄) is an acid salt used to lower pH; sodium bisulphite (NaHSO₃) is a reducing agent used for dechlorination and oxygen scavenging. Check the name on the bag.

What is the lead time?

It depends on quantity. Smaller orders are dispatched from our warehouses across Australia; larger volumes are scheduled to order; a full container load typically takes 30 to 60 days.

Do you sell to pool shops?

Yes. Trade, pallet and seasonal contract pricing is available, with delivery Australia-wide by DG-licensed road freight.

Do you offer contract pricing for scheduled volumes?

Yes. Fixed-period contract pricing is available for scheduled pallet and container quantities.

Product Documents

Download Specification Download SDS

A Certificate of Analysis (COA) is supplied with every batch.

Contact UD Trading for Sodium Bisulfate

Contact us for pricing, availability and documentation for Sodium Bisulfate. Call 07 3040 7298 or email sales@udtrading.com.au.

Request a Quote

Ready to Elevate Your Operations?

Connect with our industry experts and unlock your business potential.

Enquire Today

Locations

UD Trading service locations across Australia